

Tapper
KiCad Design Files for Tapper: A hardware tool for LF and HF RFID read, emulation and much more...
- Size
- 43.4 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 93
- Pads
- 356
- Tracks, vias
- 586, 70
- Pours
- 91
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 18 Jun 2026
- Updated
- 18 Jun 2026
Overview
Tapper is an open-source printed circuit board by rabinniroula, from the rabinniroula/tapper-hw repository on GitHub. It is a 2-layer board of 43.4 × 63 mm with 106 parts on 93 nets, routed with 586 tracks and 70 vias.
It is built around the LM358, AP2112K-3.3 and ME4055AM6G, with the ST25R3916-AQWT, FHW0603UFR27JST and LL4148 among its other parts. Its parts include 53 capacitors, 27 resistors, 6 transistors, 5 ICs and 4 switches. It belongs with the RISC-V boards of this library.
Main components
11LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedME4055AM6G
SOT-23-6-40℃~+85℃ 1 1.05A 4.2V 4V~6.5V 55uA Charging IC Lithium Battery SOT-23-6 Battery Management ROHSMICRONEBattery ManagementST25R3916-AQWT
VFQFN-32(5x5)2.4V~5.5V 27.12MHz FeliCa,ISO 14443A,ISO 14443B,ISO 15693,MIFARE,NFC I2C,SPI VFQFN-32(5x5) RFID ICs ROHSSTMicroelectronicsRFID ICsFHW0603UFR27JST
060312@7.9MHz 270nH 300mΩ 700mA 775MHz ±5% 0603 Inductors (SMD) ROHSGuangdong Fenghua Advanced Tech (FH)Inductors (SMD)LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)AFA07-S10ECC-00
SMD,P=1mm,卧贴0.3mm 10P 1mm 2.5mm Copper alloy Slide Lock Surface Mount, Right Angle Tin Top Contact SMD,P=1mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSJUSHUOFFC, FPC (Flat Flexible) Connector AssembliesBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsMBR0520L-TP
SOD-123-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky DiodesMMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric | C12, C13, C41, C42, C43, C51, C52, C53 |
| 8 | 10n | Capacitor_SMD:C_0805_2012Metric | C23, C25, C27, C29, C31, C33, C37, C39 |
| 6 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C24, C26, C28, C30, C32, C34 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R2, R3, R15, R16 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C16, C21 |
| 4 | TS36CA-0.6 250GF 031 | easyeda2kicad:SW-SMD_SHOU_TS36CA-0.6 | SW1, SW2, SW3, SW4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C20, C45, C47 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R6, R26, R27 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R12, R21 |
| 3 | 47K | Resistor_SMD:R_0603_1608Metric | R20, R28, R29 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric | C8, C10 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 12pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 150p | Capacitor_SMD:C_0805_2012Metric | C11, C19 |
| 2 | 151p | Capacitor_SMD:C_0805_2012Metric | C6, C22 |
| 2 | 220p | Capacitor_SMD:C_0805_2012Metric | C5, C9 |
| 2 | 470k | Resistor_SMD:R_0603_1608Metric | R11, R25 |
| 2 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C38, C40 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 680p | Capacitor_SMD:C_0805_2012Metric | C7, C17 |
| 2 | 821R[820R] | Resistor_SMD:R_0603_1608Metric | R4, R7 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 2 | FHW0603UFR27JST | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF | D2, D3 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2, Q6 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C35 |
| 1 | 220R | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 22n | Capacitor_SMD:C_0805_2012Metric | C36 |
| 1 | 24M | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 270pF | Capacitor_SMD:C_0805_2012Metric | C48 |
| 1 | 27M12 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | 3.3nF | Capacitor_SMD:C_0805_2012Metric | C44 |
| 1 | 330pF | Capacitor_SMD:C_0805_2012Metric | C49 |
| 1 | 33pF | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 4.7nF | Capacitor_SMD:C_0805_2012Metric | C50 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric | C46 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 51K | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 6K8 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | AFA07-S10ECC-00 | yarsakicadlibrary:FPC-SMD_AFA07-S10ECC-00-new | FPC2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH32V203CxTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | LM358 | easyeda2kicad:SO-8_L4.9-W3.9-P1.27-LS6.0-BL | U5 |
| 1 | MBR0520LT | Diode_SMD:D_SOD-123 | D1 |
| 1 | ME4055AM6G | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | MMBT3904_C181119 | easyeda2kicad:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BR | Q5 |
| 1 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | ST25R3916-AQWT | easyeda2kicad:VFQFPN-32_L5.0-W5.0-P0.50-TL-EP3.5 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
Similar boards
- 2 layers84.9 × 77.8 mm

- 4 layers

WatchBorad
ValentiWorkLearning/GradWork
Development board based on NRF52832 E73 module with C++20/CMake/VSCode based development flow
119 parts39MIT - 2 layers124.5 × 81.3 mm

- 4 layers40.5 × 100 mm

- 2 layers173.2 × 54 mm

Microcard
Volkov997/pen-card
RF Pentesting tool, but small enough for your wallet. Features: Wifi & Bluetooth, NFC, IR, (Sub Ghz, Planned)
138 parts5GPL-2.0 - 4 layers336.7 × 281.1 mm

- 2 layers60 × 88.5 mm

Attendance management system
rajinthanr/attendance-management-system
Battery-powered NFC attendance logger (STM32L432 + ST25R3916) that mounts as a USB drive, with a Qt companion app
93 parts2MIT - 2 layers40 × 70 mm

Questions
How big is the Tapper PCB?
It measures 43.4 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tapper use?
106 parts, built around the LM358, AP2112K-3.3, ME4055AM6G and ST25R3916-AQWT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tapper KiCad files?
From the rabinniroula/tapper-hw repository on GitHub, at the commit this page was made from: the board is tapper.kicad_pcb and its schematic tapper.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tapper design in my own project?
Its repository states no licence, so its author keeps all rights: ask rabinniroula before reusing the design.