2 layers35 × 75 mm
Easyhive
easyhive/easyhive_kicad
Kicad files for PCB production of easyhive boards which are used in easyhive hive scale.
106 parts1
2 layers35 × 75 mm
Easyhive 1 3
jacobron/EasyHive_M04Easyhive_M0-Board Arduino Code and Hardware Files
- Size
- 35 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 87
- Pads
- 421
- Tracks, vias
- 732, 109
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Jul 2019
- Updated
- 11 Feb 2020
Overview
Easyhive 1 3 is an open-source printed circuit board by jacobron, from the jacobron/EasyHive_M0 repository on GitHub. It is a 2-layer board of 35 × 75 mm with 101 parts on 87 nets, routed with 732 tracks and 109 vias.
It is built around the ADS1232IPW, DS18B20U and TPS22919DCK, with the XC6220B331MR, PESD0402-140 and MBR0520L-TP among its other parts. Its parts include 29 capacitors, 18 resistors, 16 diodes, 7 ICs and 2 connectors. It belongs with the SAM D and SAM boards of this library.
Main components
7
ADS1232IPW
TSSOP-24-40℃~+105℃ 1.3uA 10Hz 2 2.7V~5.3V 200kHz~8MHz、4.9152MHz 24 Auto calibration、Built-in temperature sensor、Multiplexers、Bipolar input、Integrated modulator、Built-in digital filter External External、Built-in SPI Sigma-Delta Support Yes TSSOP-24 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)
DS18B20U
MSOP-8-55℃~+125℃ 12bit 2.5V~5.5V 400ms 750nA Single-bus ±0.4℃ MSOP-8 Temperature Sensors ROHSUMWTemperature Sensors
TPS22919DCK
SC-70-6-40℃~+125℃ 1 1.5A 1.6V~5.5V 89mΩ Active High Load Switch Output discharge function、Soft-start、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SC-70-6 Power Distribution Switches ROHSTexas InstrumentsPower Distribution Switches
XC6220B331MR
SOT-23-5-40℃~+85℃@(Ta) 1 25uA 3.3V 400mV@(800mA) 5.5V 50dB@(10kHz) 900mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PESD0402-140
0402-55℃~+125℃ 0.25pF 10uA 14V 40V Bidirectional ESD IEC 61000-4-2 0402 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
MBR0520L-TP
SOD-123-65℃~+125℃ 1 Independent 20V 385mV@0.5A 5.5A 500mA 75uA@20V SOD-123 Schottky Diodes ROHSMicro Commercial ComponentsSchottky Diodes
SM1206AC
1206140° 20mA 2V 607nm 610nm Amber Water Clear 1206 LED Indication - Discrete ROHSBIVARLED Indication - Discrete
README
README.mdEasyHive_M0
M0-Board Code (Arduino C++) and Hardware Files V1.3
This Board is designed for the purpose of remote and off-grid temperature and weight measurements.
Features
- ADS1232 ADC-IC for weight reading up to two load-cells
- ATSAMD21G - CortexM0 Microcontroller - programmable with Arduino Software
- Ublox SaraN200 NB-IOT Chip for sending data via narrowband-LTE
- BQ24072 charging IC for USB/Solar and battery temperature monitoring
- DS18B20 temperatur sensor von Maxim Integrated
- Piezo Buzzer and RGB LED for user communication
The board features additional connections for I2S and I2C sensors, which are not used yet.
copyright
Software: GPL 3.0 and following versions
Hardware: CERN OHL 1.2 and following versions
This files are distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | PESD0402-140 | easyhive_1_3:0402-TVS | D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14 |
| 11 | TPTP08R | easyhive_1_3:TP08R | TP1, TP2, TP3, TP4, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 9 | 100n | easyhive_1_3:C0402 | C1, C5, C6, C7, C14, C15, C22, C27, C28 |
| 5 | 10u | easyhive_1_3:C0402 | C8, C9, C16, C17, C24 |
| 5 | 47p | easyhive_1_3:C0402 | C18, C19, C20, C21, C26 |
| 4 | MOUNT-PAD-ROUND2.8 | easyhive_1_3:2,8-PAD | H1, H2, H3, H4 |
| 3 | 0R | easyhive_1_3:C0402 | R3, R11, R12 |
| 3 | 1u | easyhive_1_3:C0402 | C2, C11, C30 |
| 3 | 4u7 | easyhive_1_3:C0402 | C12, C13, C23 |
| 2 | 15p | easyhive_1_3:C0402 | C3, C4 |
| 2 | 1k | easyhive_1_3:C0402 | R6, R7 |
| 2 | 2k | easyhive_1_3:C0402 | R13, R14 |
| 2 | 2k2 | easyhive_1_3:C0402 | R2, R8 |
| 2 | 4k7 | easyhive_1_3:C0402 | R10, R18 |
| 2 | LEDCHIPLED_0603 | easyhive_1_3:CHIPLED_0603 | LED1, LED2 |
| 2 | MBR0520LT | easyhive_1_3:SOD123 | D1, D2 |
| 2 | SM-1206 | easyhive_1_3:SM-1206 | L1, L2 |
| 1 | 100p | easyhive_1_3:C0402 | C10 |
| 1 | 10M | easyhive_1_3:C0402 | R17 |
| 1 | 10k | easyhive_1_3:C0402 | R9 |
| 1 | 10n | easyhive_1_3:C0402 | C25 |
| 1 | 1k18 | easyhive_1_3:C0402 | R4 |
| 1 | 32768 Hz | easyhive_1_3:FC135 | Q1 |
| 1 | 330 | easyhive_1_3:C0402 | R1 |
| 1 | 4M7 | easyhive_1_3:C0402 | R16 |
| 1 | 680R | easyhive_1_3:C0402 | R5 |
| 1 | 693043020611 | easyhive_1_3:693043020611 | K1 |
| 1 | 6V/0.5A | easyhive_1_3:1206 | F1 |
| 1 | ADS1232 | easyhive_1_3:TSSOP24 | IC3 |
| 1 | ATSAMD21G | easyhive_1_3:TQFP48 | IC1 |
| 1 | BQ2407X | easyhive_1_3:VQFN16 | IC2 |
| 1 | Battery | easyhive_1_3:1X03-2MM | JP2 |
| 1 | DS18B20U | easyhive_1_3:UMAX8 | IC4 |
| 1 | I2C | easyhive_1_3:1X04-2MM | JP6 |
| 1 | I2S | easyhive_1_3:1X05-2MM | JP7 |
| 1 | NTC 103AT | easyhive_1_3:C0402 | R15 |
| 1 | PKMCS | easyhive_1_3:PKMCS_BUZZER | P1 |
| 1 | SARA-N2 | easyhive_1_3:SARA-N2 | IC6 |
| 1 | SWD | easyhive_1_3:1X05-2MM | JP5 |
| 1 | Sens1 | easyhive_1_3:1X05-2MM | JP3 |
| 1 | Sens2 | easyhive_1_3:1X05-2MM | JP4 |
| 1 | Solar | easyhive_1_3:1X02_2MM | JP1 |
| 1 | TPS22919 | easyhive_1_3:sot-sc70-6 | IC7 |
| 1 | U.FL | easyhive_1_3:U.FL | J1 |
| 1 | USB_MICRO_SHIELD | easyhive_1_3:USBMICRO | X1 |
| 1 | WL-SFCD_0606_150066M153000 | easyhive_1_3:WL-SFCX_0606 | LED3 |
| 1 | XC6220B331 | easyhive_1_3:SOT25 | IC5 |
| 1 | ext. DS18B20 | easyhive_1_3:1X03-2MM | JP8 |
Similar boards
- 2 layers115 × 80 mm
- 4 layers48 × 73 mm
- 2 layers
- 4 layers23 × 51.5 mm
Power meter pcb
monash-human-power/power-meter
Power meter designed as part of Oscar Varney and Jotham Gates' FYP in 2024
64 partsMIT - 2 layers150 × 101 mm
Smart scale
wngxp/smart-scale
Work-in-progress ESP32-S3 smart food scale with custom PCB, enclosure CAD, firmware, mobile app, and backend.
97 parts - 4 layers86.3 × 91.4 mm
485toSDI12
sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.
156 partsApache-2.0 - 8 layers424.5 × 336.3 mm
Questions
How big is the Easyhive 1 3 PCB?
It measures 35 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Easyhive 1 3 use?
101 parts, built around the ADS1232IPW, DS18B20U, TPS22919DCK and XC6220B331MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Easyhive 1 3 KiCad files?
From the jacobron/EasyHive_M0 repository on GitHub, at the commit this page was made from: the board is V1.3/Hardware/KICAD Board V1.3/easyhive_1_3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Easyhive 1 3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacobron before reusing the design.