Skip to the content
123456

TPS22919DCK

Texas InstrumentsExtended

-40℃~+125℃ 1 1.5A 1.6V~5.5V 89mΩ Active High Load Switch Output discharge function、Soft-start、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SC-70-6 Power Distribution Switches ROHS

Part id
ti/TPS22919DCK
Category
Power Distribution Switches
Package
SC-70-6
Pins
6
In stock
21,504 at JLCPCB (C2149796)
Used on
23 open-source boards

Overview

The TPS22919DCK is a power Distribution Switche made by Texas Instruments in a SC-70-6 package with 6 pins. -40℃~+125℃ 1 1.5A 1.6V~5.5V 89mΩ Active High Load Switch Output discharge function、Soft-start、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SC-70-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:TPS22919DCK, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-363_SC-70-6, from KiCad's library), ready for a KiCad board. 21,504 are in stock at JLCPCB (part C2149796). 23 open-source boards in 22 repositories on GitHub use it.

Symbol

1IN2GND3ON5QOD6OUT
Power_Management:TPS22919DCKFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-363_SC-70-6From KiCad's library

From the datasheet

12
Supply, least
1.6 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 4
Junction, hottest
125 °C · junction temperature, normal operation max · p. 18
Takes working
8 µA · VIN quiescent current, typical at 3.6 V, 25°C, output open · p. 5
Takes asleep
2 nA · VIN shutdown current, typical at 3.6 V, 25°C · p. 5
Gives
1.5 A · continuous switch current max · p. 4
Current limit
3 A · short circuit current limit, typical, VOUT ≤ VIN - 1.5 V · p. 5
Junction to air (DCK (SC-70))
210.7 K/W · junction-to-ambient thermal resistance · p. 4
Junction to case (DCK (SC-70))
142 K/W · junction-to-case top thermal resistance · p. 4
Junction to board (DCK (SC-70))
69 K/W · junction-to-board thermal resistance · p. 4
Edge
10 µs · output fall time, typical, RL = 100Ω, CL = 0.1uF, RQOD short · p. 6

What it is and has

8
Continuous current
1.5A · p. 1
ON resistance
89mΩ typical at VIN = 5V · p. 1
ON resistance
90mΩ typical at VIN = 3.6V · p. 1
ON resistance
105mΩ typical at VIN = 1.8V · p. 1
Protection
Output short circuit protection, 3A typical · p. 1
Output discharge
Adjustable discharge and fall time · p. 1
Internal QOD resistance
24Ω typical · p. 1
Package
SC-70, 6 pins, 2.1mm × 2.0mm · p. 1

Around it

2
cap 47 µF
between VOUT and GND; Load capacitance in the typical application example; place output capacitors close to the device. · p. 15
res greater than 600 Ω
between VOUT and QOD; External QOD resistor for the shutdown sequencing design example. · p. 16

Specifications

58
ParameterConditionsAs printedPage
Maximum Input Voltage Range VINOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum Output Voltage Range VOUTOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum ON Pin Voltage Range VONOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum QOD Pin Voltage Range VQODOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum Continuous Current IMAXOver operating free-air temperature rangemax 1.5 A4
Maximum Pulsed Current (2 ms, 2% Duty Cycle) IPLS2 ms, 2% Duty Cyclemax 2.5 A4
Storage temperature TSTGmin -65 · max 150 °C4
Maximum Lead Temperature (10 s soldering time) TLEAD10 s soldering timemax 300 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, allpins; ±2000 Vmin -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specificationJESD22-C101, all pins; ±1000 Vmin -1000 · max 1000 V4
Input Voltage Range VINover operating free-air temperature rangemin 1.6 · max 5.5 V4
Output Voltage Range VOUTover operating free-air temperature rangemin 0 · max 5.5 V4
ON Pin High Voltage Range VIHover operating free-air temperature rangemin 1 · max 5.5 V4
ON Pin Low Voltage Range VILover operating free-air temperature rangemin 0 · max 0.35 V4
Junction-to-ambient thermal resistance RθJATPS22919, DCK (SC-70)typ 210.7 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS22919, DCK (SC-70)typ 142 °C/W4
Junction-to-board thermal resistance RθJBTPS22919, DCK (SC-70)typ 69 °C/W4
Junction-to-top characterization parameter ΨJTTPS22919, DCK (SC-70)typ 52.7 °C/W4
Junction-to-board characterization parameter ΨJBTPS22919, DCK (SC-70)typ 68.8 °C/W4
VIN Quiescent Current IQ, VINVIN = 3.6V, VON ≥ VIH, VOUT = Open, TJ = 25°Ctyp 8 · max 15 uA5
VIN Quiescent Current IQ, VINVIN = 3.6V, VON ≥ VIH, VOUT = Open, TJ = -40°C to 125°Cmax 20 uA5
VIN Shutdown Current ISD, VINVIN = 3.6V, VON ≤ VIL, VOUT = GND, TJ = 25°Ctyp 2 · max 20 nA5
VIN Shutdown Current ISD, VINVIN = 3.6V, VON ≤ VIL, VOUT = GND, TJ = -40°C to 125°Cmax 800 nA5
ON-State Resistance RONIOUT = -200 mA, VIN = 5 V, TJ = 25°Ctyp 89 · max 125 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 5 V, TJ = -40°C to 85°Cmax 150 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 5 V, TJ = -40°C to 105°Cmax 175 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 5 V, TJ = -40°C to 125°Cmax 200 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 3.6 V, TJ = 25°Ctyp 90 · max 150 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 3.6 V, TJ = -40°C to 85°Cmax 200 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 3.6 V, TJ = -40°C to 105°Cmax 225 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 3.6 V, TJ = -40°C to 125°Cmax 250 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 1.8 V, TJ = 25°Ctyp 105 · max 300 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 1.8 V, TJ = -40°C to 85°Cmax 400 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 1.8 V, TJ = -40°C to 105°Cmax 450 mΩ5
ON-State Resistance RONIOUT = -200 mA, VIN = 1.8 V, TJ = -40°C to 125°Cmax 500 mΩ5
Short Circuit Current Limit ISCVIN = 3.6V, VOUT ≤ VIN - 1.5 V, TJ = -40°C to 125°Ctyp 3 A5
Short Circuit Current Limit ISCVIN = 3.6V, VOUT ≤ VSC, TJ = -40°C to 125°Cmin 30 mA5
Output Short Detection Threshold VSCVIN = 3.6V, VIN - VOUT, TJ = -40°C to 125°Cmin 0.3 · typ 0.36 · max 0.46 V5
Output Short Reponse Time tSCVIN = 1.6V to 5.5V, 10mΩ short applied, TJ = -40°C to 125°Ctyp 2 us5
Thermal Shutdown TSDVIN = 3.6V, Risingtyp 180 ℃5
Thermal Shutdown TSDVIN = 3.6V, Fallingtyp 145 ℃5
ON Pin Leakage IONVIN = 3.6V, VON ≥ VIH, TJ = -40°C to 125°Cmax 100 nA5
Smart Pull Down Resistance RPD, ONVIN = 3.6V, VON ≤ VIL, TJ = -40°C to 125°Ctyp 530 kΩ5
QOD Pin Internal Discharge Resistance RPD, QODVIN = 3.6V, VON ≤ VIL, TJ = -40°C to 125°Ctyp 24 Ω5
Turn ON Time tONVIN = 5.0 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1950 us5
Turn ON Time tONVIN = 3.6 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1750 us5
Turn ON Time tONVIN = 1.8 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1500 us5
Output Rise Time tRVIN = 5.0 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1280 us5
Output Rise Time tRVIN = 3.6 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1100 us5
Output Rise Time tRVIN = 1.8 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 750 us5
Turn ON Slew Rate SRONVIN = 5.0 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 3.2 mV/us5
Turn ON Slew Rate SRONVIN = 3.6 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 2.7 mV/us5
Turn ON Slew Rate SRONVIN = 1.8 V, ambient 25°C, CL = 0.1 uF, RL = 100 Ωtyp 1.8 mV/us5
Turn OFF Time tOFFVIN = 1.8 V to 5.0V, RL = 100Ω, CL = 0.1uF, ambient 25°Ctyp 6 us5
Output Fall Time tFALLVIN = 3.6V, ambient 25°C, RL = 100Ω, CL = 0.1uF, RQOD = Shorttyp 10 us6
Output Fall Time tFALLVIN = 3.6V, ambient 25°C, RL = Open, CL = 10uF, RQOD = Shorttyp 0.4 ms6
Output Fall Time tFALLVIN = 3.6V, ambient 25°C, RL = Open, CL = 10uF, RQOD = 100 Ωtyp 3.5 ms6
Output Fall Time tFALLVIN = 3.6V, ambient 25°C, RL = Open, CL = 100uF, RQOD = Shorttyp 4 ms6

Pins, by the datasheet

6
1 IN
Switch input. · p. 3
2 GND
Device ground. · p. 3
3 ON
Active high switch control input; do not leave floating. · p. 3
4 NC
No connect pin; leave floating. · p. 3
5 QOD
Quick Output Discharge pin; connect to VOUT through an external resistor or directly to use the internal resistor, or leave floating to disable discharge. · p. 3
6 VOUT
Switch output. · p. 3

Ordering codes, by the datasheet

5
PTPS22919DCKR
SC70 (DCK), 6 pins · Obsolete preproduction; operating temperature -40 to 125°C. · p. 20
TPS22919DCKR
SC70 (DCK), 6 pins · 3000, LARGE T&R; operating temperature -40 to 105°C. · p. 20
TPS22919DCKR.A
SC70 (DCK), 6 pins · 3000, LARGE T&R; operating temperature -40 to 125°C. · p. 20
TPS22919DCKT
SC70 (DCK), 6 pins · 250, SMALL T&R; operating temperature -40 to 105°C. · p. 20
TPS22919DCKT.A
SC70 (DCK), 6 pins · 250, SMALL T&R; operating temperature -40 to 125°C. · p. 20

Open-source boards using it

23See all 23
  • 8 layers424.5 × 336.3 mmBarebones, the printed circuit board in 3D

    Barebones

    nzevh/barebones

    fully open source laptop based on the RK3588 Soc

    1,033 parts23CERN-OHL-S-2.0
  • 2 layers82 × 55 mmBmo power, the printed circuit board in 3D

    Bmo power

    nealjack/BMO

    Code, Art and Design files to make BMO from adventure time

    83 parts9
  • 6 layersOpenAquatix Hardware, the printed circuit board in 3D

    OpenAquatix Hardware

    ericvoi/OpenAquatix-Hardware

    OpenAquatix PCB files

    351 parts4CERN-OHL-P-2.0
  • 2 layers35 × 75 mmEasyhive 1 3, the printed circuit board in 3D

    Easyhive 1 3

    jacobron/EasyHive_M0

    Easyhive_M0-Board Arduino Code and Hardware Files

    101 parts4
  • 2 layers59 × 91 mmSmart doorbell, the printed circuit board in 3D

    Smart doorbell

    calebhabesh/doorlink

    Self-hosted ESP32-S3 smart doorbell with a custom PCB, Raspberry Pi gateway, and web dashboard

    108 parts1MIT
  • 2 layers35 × 75 mmEasyhive, the printed circuit board in 3D

    Easyhive

    easyhive/easyhive_kicad

    Kicad files for PCB production of easyhive boards which are used in easyhive hive scale.

    106 parts1
  • 4 layers116 × 106 mmCard, the printed circuit board in 3D

    Card

    increpare/PuzzleScript-labs

    firehose of mostly ai-written puzzlescript projects. main project is https://github.com/increpare/puzzlescript/

    48 parts1MIT
  • 2 layers60.5 × 40.1 mmPROGLOG01, the printed circuit board in 3D

    PROGLOG01

    mlab-modules/PROGLOG01

    Small low-power open-source toolchain compatible FPGA

    66 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS22919DCK?

Yes. The symbol is Power_Management:TPS22919DCK and the footprint Package_TO_SOT_SMD:SOT-363_SC-70-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22919DCK?

SC-70-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS22919DCK datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22919DCK?

JLCPCB lists it as part C2149796, with 21,504 in stock; the sellers' links on this page open their listings.

What can replace the TPS22919DCK?

Parts like it in the library: the DZDH0401DW by Diodes Incorporated, the LM66100DCK by Texas Instruments, the TPS22948DCK by Texas Instruments and the SI1865DDL by TECH PUBLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS22919DCK?

23 boards in 22 repositories on GitHub; the most starred are listed on this page, with their KiCad files.