Skip to the content

Boards using the SPH0641LU4H-1

36 boards

Boards in 29 GitHub repositories, designed in KiCad, that use the SPH0641LU4H-1 by Knowles (-26dB 0.98mm 1.8V 2.65mm 235uA~270uA 3.5mm 64.3dB Omnidirectional Omnidirectional pickup LGA-5(3.5x2.7) MEMS Microphones ROHS). See how each wires it, with its parts, size, README and files; the SPH0641LU4H-1’s symbol, footprint and pinout are on its own page.

  • 4 layers179.6 × 161 mmArray, the printed circuit board in 3D

    Array

    Iari-Lab/OpenAcousticCamera

    266 parts26
  • 2 layersSsl, the printed circuit board in 3D

    Ssl

    meerstern/Sound_Direction_Sensor

    This board detects the direction of sound with 4-pdm mems mic using GCC-PHAT algorithm.

    56 parts17
  • 2 layers20 × 15 mmSPH0641LU, the printed circuit board in 3D

    SPH0641LU

    meerstern/SPH0641LU

    The Converter board of Kicad Data for SPH0641LU

    7 parts10
  • 4 layers57 × 56 mmIot led strip pcb, the printed circuit board in 3D

    Iot led strip pcb

    0xjmux/iot_leddriver_hw

    ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization

    85 parts9
  • 2 layers100 × 100 mmAcoustic camera, the printed circuit board in 3D

    Acoustic camera

    mhbbParsa/acoustic_camera

    FPGA acoustic camera with real-time sound source localisation using Goertzel beamforming, displayed as a live heatmap on VGA/webcam overlay

    68 parts6MIT
  • 2 layers43.2 × 44.5 mmUmic, the printed circuit board in 3D

    Umic

    anfractuosity/wavecatcher

    Wavecatcher - simple board for acoustic cryptanalysis

    34 parts4
  • 2 layers67.1 × 88.4 mmDE429 001 INSTALL, the printed circuit board in 3D

    DE429 001 INSTALL

    Purdue-Northwest-Vibration-Anaylsis/Purdue-Northwest-Vibration-Analysis

    Vibration analysis senior design project for purdue northwest.

    48 parts2
  • 2 layers75 × 5.5 mmCc ring, the printed circuit board in 3D

    Cc ring

    JackToaster/Wearable-LED-Ring

    Tiny LED ring with a microphone for wearable music-reactive lighting

    42 parts1
  • 4 layers179.6 × 161 mmArray, the printed circuit board in 3D

    Array

    krasin/open_acoustic_camera

    266 parts1CERN-OHL-S-2.0
  • 4 layers120 × 120 mmUSCAM, the printed circuit board in 3D

    USCAM

    LKAPBx/sonicCam

    Sound Camera

    77 parts1MIT
  • 2 layers30 × 41 mmBt audio, the printed circuit board in 3D

    Bt audio

    loicfrance/bluetooth-audio-relay

    Audio Bluetooth to audio jack module

    77 parts1
  • 4 layers24 × 42 mmAura a03, the printed circuit board in 3D

    Aura a03

    Avinash1286/pendent

    AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.

    61 parts
  • 6 layers30.5 × 22 mmBugg mic r4, the printed circuit board in 3D

    Bugg mic r4

    bugg-resources/bugg-hardware-mic

    This repository contains the KiCad source files for the microphone PCB of the Bugg recording device.

    25 parts
  • 2 layers60.8 × 57.9 mmHockeyHelmetHeadphonesLeft, the printed circuit board in 3D

    HockeyHelmetHeadphonesLeft

    Colden-Rother/Hockey-Jamz-Open-Source-Modern-Bluetooth-Headphones-for-Hockey-Helmets

    Open Source PCB and software for modern bluetooth headphones. This specific design was for hockey helmets, but this easily could be used to just make normal headphones or a custom headset.

    35 parts
  • 4 layers146 × 102 mmHPM6E00EVKRevC, the printed circuit board in 3D

    HPM6E00EVKRevC

    joelxue123/hpm6e00evk-ethercat-motor-bridge

    This workspace is for the HPM6E00EVK RevC EtherCAT-to-UART motor bridge.

    562 parts
  • 6 layers13 × 27 mmHaven v2 pod, the printed circuit board in 3D

    Haven v2 pod

    pauliano22/haven-dev-board-kicad

    Haven — KiCad port of the dev board (nRF5340 + ADAU1860 DSP), based on the stock OpenEarable 2.0 design

    79 parts
  • 4 layers192 × 315.1 mmAesa, the printed circuit board in 3D

    Aesa

    tieziyun/ultrasonic-aesa

    A 40 kHz in-air phased array, an acoustic "AESA". It has 64 transducers in an 8 × 8 grid, and each one can transmit or listen under FPGA control, element by element and ping by ping.

    2,139 parts
  • 2 layers84 × 84 mmMic array, the printed circuit board in 3D

    Mic array

    willevic2002/ultrasonic-array

    Egenbyggd 3D-ultraljudssensor för min robot: en 40 kHz-sändare och en array med 16 digitala MEMS-mikrofoner (PDM). Riktning och avstånd till hinder bestäms med chirp, matchat filter och beamforming.

    37 partsMIT
  • 2 layers17.3 × 16.5 mmI2C MIC, the printed circuit board in 3D

    I2C MIC

    goran-mahovlic/ulx3s-extensions

    PMOD boards for ULX3S

    12 parts49
  • 4 layers120 × 22 mmAcoustic phantom, the printed circuit board in 3D

    Acoustic phantom

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    20 parts2
  • 2 layersSoundkey, the printed circuit board in 3D

    Soundkey

    daimapi/soundkey

    5 parts1
  • 2 layers100 × 70 mmHipbadge, the printed circuit board in 3D

    Hipbadge

    sneurlax/hip-badge

    And join our matrix discussion channel: https://matrix.to/#/#hipbadge:matrix.org

    199 parts1
  • 2 layers21 × 31.5 mmESP32Camera, the printed circuit board in 3D

    ESP32Camera

    wasa-rockoon/WOBC

    WASAロケットプロジェクト 共通電装基盤

    40 parts1MIT
  • 4 layers24 × 42 mmAura a03-before placement refinement, the printed circuit board in 3D

    Aura a03-before placement refinement

    Avinash1286/pendent

    AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.

    61 parts