4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0
Boards using the DPS310
27 boardsBoards in 25 GitHub repositories, designed in KiCad, that use the DPS310 by Infineon Technologies (-40℃~+85℃ 0.5pa/K 1.7V~3.6V 100pa 27.6ms 30Kpa~1.2bar 500nA 6pa I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes LGA-8(2x2.5) Pressure Sensors ROHS). See how each wires it, with its parts, size, README and files; the DPS310’s symbol, footprint and pinout are on its own page.
- 4 layers34 × 40 mm
WingFC
BryanSouza91/WingFC
WingFC is an open-source embedded flight controller for sub-250g fixed-wing aircraft, built with TinyGo. It provides stabilization, mixing, and safety features for elevon-equipped models, with a focus on reliability and…
38 parts10MIT - 6 layers36 × 36 mm
- 6 layers100 × 60 mm
Aether
nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.
180 parts10 - 2 layers70 × 70 mm
AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8 - 4 layers58.4 × 22.9 mm
Quickfeather board
antmicro/quickfeather-dev-board
This project contains open hardware design files for the QuickFeather development board based on the QuickLogic EOS S3 Sensor Processing Platform.
101 parts6CC-BY-SA-4.0 - 2 layers25 × 50 mm
Nuernberg Sensor
opendata-nuernberg/open-sensor-platform
Hardware Designs and Firmware of the Open Sensor Platform
40 parts2MIT - 4 layers54.5 × 18 mm
- 2 layers101.9 × 101.9 mm
Tejas
Rujul-Rumale/INSPACe-CanSat-Team-Tejas-PCB-Design
Onboard computer PCB for the INSPACe Team Tejas CanSat — Teensy 4.1 + XBee + sensor suite, designed in KiCad. Schematic, layout, Gerbers, 3D renders and libraries.
34 parts1 - 2 layers33 × 34 mm
- 4 layers41 × 41 mm
Flight Controller
benwys/SparrowHawk
Open source flight controller for FPV drones. Includes two complete hardware designs (kicad) with production files. Will include custom firmware (bare-metal cpp). In progress :-)
103 partsMIT - 2 layers31.8 × 36.8 mm
E INK Watch
DomenicHampson/EnkWatch
Custom designed e-ink smartwatch with 2 weeks of battery life. Displays time, date, battery health, altitude and weather data (note: I am still in the process of assembling the PCB and writing the firmware)
53 parts - 6 layers160 × 100 mm
- 4 layers61 × 37 mm
- 4 layers94.7 × 69.1 mm
VariometerV2.2.1
oiver12/VariometerV2
Paragliding variometer: custom KiCad PCBs, ESP32 firmware, sensor fusion, e-ink UI, and desktop flight replay.
158 partsMIT - 4 layers36.9 × 36.9 mm
Fpv flight controller
stefanpopovic-dev/fpv-flight-controller
An open-hardware, 4-layer FPV flight controller board built around the STM32F405RGT6, designed in KiCad. Currently at hardware revision REV3. Designed to run Betaflight.
111 partsCERN-OHL-S-2.0 - 2 layers99.1 × 29.9 mm
- 2 layers131.9 × 53.3 mm
- 2 layers47.5 × 72 mm
- 2 layers115 × 115 mm
- 2 layers15 × 16.5 mm
- 2 layers21 × 54 mm
SensorBoardNoMCU
Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects
29 parts17 - 2 layers52 × 44 mm
SensorBoardNoMCU
Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects
28 parts17 - 4 layers36 × 44 mm
Tinyfc core
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
103 parts10BSD-3-Clause