
BrodBoost PD
axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
Boards in 35 GitHub repositories, designed in KiCad, that use the DMP3013SFV by Diodes Incorporated (-55℃~+150℃ 1 P-Channel 1.674nF 1.94W 17mΩ@4.5V 230pF 30V 33.7nC@10V 35A 3V P-Channel PowerDI3333-8 MOSFETs ROHS). See how each wires it, with its parts, size, README and files; the DMP3013SFV’s symbol, footprint and pinout are on its own page.

axiometa/BrodBoost-PD
Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip

laurigates/mcu-tinkering-lab
This repository contains projects for various embedded platforms (ESP32, Arduino, STM32).

dognotdog/smol_servo
circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.


i2hm/micro_climate_station
Open the KiCad project using KiCad 7 and above.

AnaviTechnology/anavi-fixed-power-delivery
Small 2-layer fixed USB-C PD power sink with CYPD3177 and 2 pin terminal block.


wolfgangfriedrich/P42-USB-C-PD-Sink-EPR
USB-PD3.1 Sink EPR Diodes AP33771C


calicopizzadelivery/sbc-development-baseboard
Baseboard for remote management of an attached SBC: K64 MCU as USB HID to the target and Ethernet to the workstation, six switched USB-A ports, isolated SPDT relays, level-shifted console, switched target power


CarloMara/usbc-esp32-pump-controller
USB C PD pump controller for small plants

David207025/Venturi
Highly optimized line follower robot controlled by the ESP32-S31-WROOM-3 module

ericyuanyong/asset-tracker
a asset tracker demo project based on msom






PolybiusBiotech/led_beacon
The PCBA and firmware for the controllable LED Beacons.

ryanstevensmith/locust_hardware
The electronics repository for the locust project by Imperial College
