

Usb pd water controller
USB C PD pump controller for small plants
- Size
- 65 × 47.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 81
- Pads
- 273
- Tracks, vias
- 373, 139
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 May 2026
- Updated
- 30 May 2026
Overview
Usb pd water controller is an open-source printed circuit board by CarloMara, from the CarloMara/usbc-esp32-pump-controller repository on GitHub. It is a 2-layer board of 65 × 47.4 mm with 67 parts on 81 nets, routed with 373 tracks and 139 vias.
It is built around the ESP32-S3-MINI-1-N8, CYPD3177-24LQXQ and AO3400A, with the SS34 and DMP3013SFV among its other parts. Its parts include 23 resistors, 11 capacitors, 8 transistors, 8 connectors and 7 diodes. It belongs with the power boards and the ESP32 boards of this library.
Main components
5ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesCYPD3177-24LQXQ
TQFN-24TQFN-24-EP(4x4) Power Distribution Switches ROHSInfineon TechnologiesPower Distribution SwitchesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesDMP3013SFV
PowerDI3333-8-55℃~+150℃ 1 P-Channel 1.674nF 1.94W 17mΩ@4.5V 230pF 30V 33.7nC@10V 35A 3V P-Channel PowerDI3333-8 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 7 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP3, TP4, TP5, TP6, TP7, TP8 |
| 6 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16, R17, R18, R19, R20, R21 |
| 6 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | MOTOR | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J3, J5, J6, J7, J8, J9 |
| 6 | SS34 | Diode_SMD:D_SMA | D2, D3, D4, D5, D6, D7 |
| 5 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R13, R14, R15, R22 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C6, C7 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C8 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R24 |
| 2 | DMP3013SFV | Package_SON:Diodes_PowerDI3333-8 | Q1, Q2 |
| 1 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 15V | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 3.3uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | CYPD3177-24LQ | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm | U1 |
| 1 | ESP32-S3-MINI-1 | RF_Module:ESP32-S2-MINI-1 | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | Screw_Terminal_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1 |
Similar boards
- 2 layers

- 2 layers70 × 100 mm

- 4 layers62 × 42 mm

Hybrid Controller
DesignStraub/ringwheel-hybrid-drone
A 5-inch FPV drone whose prop ducts fold down and become wheels. Design study in Fusion 360 and KiCad, CC BY-NC-SA 4.0.
103 parts - 4 layers58.5 × 120.9 mm

MainPCB
LEDs-by-glowingkitty/GlowTower
A beautiful looking LED lamp for lighting up your home or setting the right mood at house parties - with animations that can react to music.
155 parts9GPL-3.0 - 6 layers140 × 100 mm

Sbc baseboard
calicopizzadelivery/sbc-development-baseboard
Baseboard for remote management of an attached SBC: K64 MCU as USB HID to the target and Ethernet to the workstation, six switched USB-A ports, isolated SPDT relays, level-shifted console, switched target power
271 partsApache-2.0 - 4 layers57.1 × 33.9 mm

- 2 layers68.4 × 36.7 mm

Emf beacon
PolybiusBiotech/led_beacon
The PCBA and firmware for the controllable LED Beacons.
134 parts - 4 layers100 × 75 mm

Freedo radio
CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on
135 parts33Apache-2.0
Questions
How big is the Usb pd water controller PCB?
It measures 65 × 47.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb pd water controller use?
67 parts, built around the ESP32-S3-MINI-1-N8, CYPD3177-24LQXQ, AO3400A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb pd water controller KiCad files?
From the CarloMara/usbc-esp32-pump-controller repository on GitHub, at the commit this page was made from: the board is usb_pd_water_controller.kicad_pcb and its schematic usb_pd_water_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb pd water controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask CarloMara before reusing the design.