Skip to the content

Boards using the 74AHC1G86SE

23 boards

Boards in 20 GitHub repositories, designed in KiCad, that use the 74AHC1G86SE by Diodes Incorporated (-40℃~+125℃ 1 1.5V~3.85V 1uA 2V~5.5V 500mV~1.65V 74AHC Series 8.8ns@5V,50pF 8mA 8mA XOR Gate SOT-353 Logic Gates ROHS). See how each wires it, with its parts, size, README and files; the 74AHC1G86SE’s symbol, footprint and pinout are on its own page.

  • 2 layers31.4 × 20.6 mmWindow sensor V5, the printed circuit board in 3D

    Window sensor V5

    gadjet/Window-Door-sensor-Version-5

    Version 5 of the Window/Door sensor project this time with ultra low current consumption

    32 parts70GPL-2.0
  • 2 layers56 × 56 mmPps watch, the printed circuit board in 3D

    Pps watch

    idlehandsdev/pps-watch

    An extremely accurate watch that doesn't tell time.

    39 parts42AGPL-3.0
  • 2 layers50 × 70 mmComprgb, the printed circuit board in 3D

    Comprgb

    jamvanderloeff/Component-to-RGB

    Component to RGB transcoder using LMH1251

    46 parts14MIT
  • 4 layers52.1 × 107.8 mmPCB Layout, the printed circuit board in 3D

    PCB Layout

    anwaypimpalkar/smartElevatorSystem

    A holistic device for safer and smarter contactless elevator system using Embedded Machine Learning on an Arduino Nano 33 BLE Sense, complete with a deployable PCB and fire safety system pipeline.

    24 parts6
  • 2 layers35.3 × 18.4 mmRemote Temp Humidity Sensor, the printed circuit board in 3D

    Remote Temp Humidity Sensor

    gadjet/Multifunction-ESP8266-Sensor-board

    AKA Wireless window/door sensor version 4

    28 parts3GPL-3.0
  • 4 layers8b alu slice, the printed circuit board in 3D

    8b alu slice

    tmarhguy/tomato

    A functional 32-bit computer built from scratch in a dorm; implemented on FPGA, Kicad, browser simulation

    1,105 parts2
  • 2 layers91.4 × 73.7 mmSmdPracticeBoard, the printed circuit board in 3D

    SmdPracticeBoard

    perriestudios/SMD-Soldering-PCB

    A PCB I designed as a TA for EE 201 at UW over the Winter 2024

    34 parts1
  • 2 layers100 × 100 mmHalfBridge SiC, the printed circuit board in 3D

    HalfBridge SiC

    AHWV/HBridge_HFreq_HVolt_r0

    160 parts
  • 2 layers100 × 100 mmHalfBridge SiC, the printed circuit board in 3D

    HalfBridge SiC

    AHWV/KiCad_PCB_HalfBridge_SiC_TO263-7

    95 parts
  • 2 layers87.1 × 58.5 mmPanel, the printed circuit board in 3D

    Panel

    ConfusedHello/STorM32-NT

    A fork of the STorM32 NT controller board for my own purposes.

    217 parts
  • 4 layers91.5 × 32.7 mmPcb challenge final, the printed circuit board in 3D

    Pcb challenge final

    davidlesman/PCB-Challenge-2026

    PCB Challenge sponsored by PCBWay and Jane Street

    154 parts
  • 2 layers102.9 × 99.1 mmDCC Booster, the printed circuit board in 3D

    DCC Booster

    DavidMFlynn/DCC-Booster

    DCC Booster

    130 partsGPL-3.0
  • 4 layers45 × 45 mmPcb challenge final, the printed circuit board in 3D

    Pcb challenge final

    manyetox/PCB-Challenge-4-word-4-bit-asynchronous-FIFO

    These were checked with KiCad's DRC and an independent script: - No unconnected items, no clearance, short or crossing errors. - No vias inside any IC courtyard, top or bottom.

    164 partsApache-2.0
  • 4 layers213.5 × 128.5 mmAnalog via, the printed circuit board in 3D

    Analog via

    starlingcode/analog-via

    Designs for an all-analog variant of the VIA meta crossfader

    767 parts
  • 2 layers100 × 100 mmStack, the printed circuit board in 3D

    Stack

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    79 parts145
  • 2 layers24 × 36 mmLoRaModem, the printed circuit board in 3D

    LoRaModem

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    48 parts10BSD-3-Clause
  • 4 layers36 × 44 mmTinyfc core, the printed circuit board in 3D

    Tinyfc core

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    103 parts10BSD-3-Clause
  • 2 layers63.9 × 45.1 mmJosh SafetyCircuit, the printed circuit board in 3D

    Josh SafetyCircuit

    LSUTigerRacing/Electronics

    This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.

    63 parts8
  • 4 layers200 × 50 mmMemory, the printed circuit board in 3D

    Memory

    pottsali/cpu-pub

    Homebrew CPU project

    77 parts3
  • 4 layers209.6 × 108.5 mmGPIO, the printed circuit board in 3D

    GPIO

    89Mods/LVDC

    Replica of the Launch Vehicle Digital Computer using 74-series logic

    113 parts2MIT
  • 2 layers25 × 40 mmSTorM32 NT BGC v333i, the printed circuit board in 3D

    STorM32 NT BGC v333i

    ConfusedHello/STorM32-NT

    A fork of the STorM32 NT controller board for my own purposes.

    74 parts
  • 2 layers99.1 × 109.2 mmDCC Booster, the printed circuit board in 3D

    DCC Booster

    DavidMFlynn/DCC-Booster

    DCC Booster

    99 partsGPL-3.0