

LumaDoubDevBoard
- Size
- 99.5 × 99.5 mm
- Copper layers
- 4
- Thickness
- 1.22 mm
- Parts
- 253
- Nets
- 265
- Pads
- 916
- Tracks, vias
- 1,828, 229
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20240706)
- Created
- 9 Sep 2024
- Updated
- 2 Sep 2026
Overview
LumaDoubDevBoard is an open-source printed circuit board by Shank-Mods, from the Shank-Mods/LumaDoub repository on GitHub. It is a 4-layer board of 99.5 × 99.5 mm with 253 parts on 265 nets, routed with 1,828 tracks and 229 vias.
It is built around the TPF141-TR, ADV7390BCPZ and LM1881, with the RS8752XK, LP5907MFX-1.8 and 74AHC1G86SE among its other parts. Its parts include 72 resistors, 62 capacitors, 20 ICs, 16 switches and 11 connectors. It belongs with the RP2040 boards of this library.
Main components
11TPF141-TR
SOT-23-6-40℃~+85℃ 0.1% 0.3deg 1 11500000nA 300V/us 3V~5.5V 6 71.5MHz Anti-aliasing / reconstruction filter、Filter bypass、DC clamp / DC restore SOT-23-6 Video Amplifiers ROHS3PEAKVideo AmplifiersADV7390BCPZ
LFCSP-32-VQ(5x5)Programmable resolution、Video format detection、Programmable gain amplifier LFCSP-32-VQ(5x5) ADCs/DACs - Special Purpose ROHSAnalog DevicesVideo Interface ICsLM1881
SOP-80℃~+70℃@(Ta) 5V~12V Splitter SOP-8 Video Interface ICs ROHSSlkorVideo Interface ICsRS8752XK
SOIC-8-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.5mV 180V/us 1pA 1pA 2.5V~5.5V 2.9mA 250MHz 4uV/℃ 85dB 85mA 8nV/√Hz@1MHz Built-in compensation Rail-to-rail output SOIC-8 Operational Amplifier ROHSJiangsu RUNIC TechOperational AmplifierLP5907MFX-1.8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 120mV@(250mA) 12uA 250mA 5.5V 6.5uVrms 82dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Temperature Protection、Enable、Short Circuit Protection SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators74AHC1G86SE
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1uA 2V~5.5V 500mV~1.65V 74AHC Series 8.8ns@5V,50pF 8mA 8mA XOR Gate SOT-353 Logic Gates ROHSDiodes IncorporatedLogic GatesSS12D07VG4
插件-5P,8.7x4.4mm4.4mm 8.7mm 8.7mm Black PC Pin Rectangular Columnar SPDT Through Hole 插件-5P,8.7x4.4mm Slide Switches ROHSHanElectricitySlide SwitchesLVK12R100CER
1206-40℃~+125℃ 100mΩ 500mW Thick Film Resistor ±0.25% ±50ppm/℃ 1206 Chip Resistor - Surface Mount ROHSOhmiteChip Resistor - Surface MountDFE252012P-1R0M=P2
10081uH 4.3A 4.3A 42mΩ ±20% 1008 Power Inductors ROHSMurataPower InductorsSMD0805B050TF
0805-40℃~+85℃ 1.25mm 1.5mm 100A 100ms 150mΩ 1A 2.2mm 500mA 500mW 6V 850mΩ 0805 Resettable Fuses ROHSBrightkingResettable FusesABM8AIG-28.63636MHZ-12-2Z-T3
SMD3225-4P-40℃~+125℃ 12pF 28.63636MHz 50Ω ±20ppm ±50ppm SMD3225-4P Crystals ROHSAbraconCrystals
README
README.mdLumaDoub
Parts
253| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SS12D07VG4 | EveryThingGoesHere:SW_SS12D07VG4 | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 |
| 16 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28 |
| 15 | 0.1uf | AAAAAA2:Cap_SMD_0603 | C2, C4, C6, C8, C9, C11, C16, C17, C18, C19, C21, C23, C25, C26, C28 |
| 12 | HSync | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP4, JP6, JP8, JP9, JP10, JP14, JP15, JP16, JP17, JP33, JP34, JP35 |
| 10 | 10nf | AAAAAA2:Cap_SMD_0603 | C1, C3, C5, C7, C10, C20, C22, C24, C27, C29 |
| 10 | 1μF | Capacitor_SMD:C_0402_1005Metric | C41, C42, C43, C44, C45, C46, C47, C49, C50, C51 |
| 10 | IN1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP11, JP23, JP24, JP25, JP26, JP27, JP28, JP29, JP30 |
| 8 | 100n | AAAAAA2:Cap_SMD_0603 | C55, C56, C57, C58, C59, C60, C61, C62 |
| 8 | LED | LED_THT:LED_D5.0mm | D9, D10, D11, D12, D13, D14, D15, D16 |
| 8 | LVK12R100CER | Resistor_SMD:R_Shunt_Ohmite_LVK12 | R31, R42, R43, R44, R45, R46, R47, R48 |
| 8 | R | Resistor_SMD:R_0603_1608Metric | R33, R34, R35, R36, R37, R38, R39, R40 |
| 7 | 75 | Resistor_SMD:R_0603_1608Metric | R49, R50, R51, R61, R63, R64, R70 |
| 6 | 22μF | Capacitor_SMD:C_0603_1608Metric | C33, C34, C36, C37, C39, C40 |
| 6 | 4.7k | Resistor_SMD:R_0603_1608Metric | R4, R5, R10, R24, R25, R26 |
| 6 | IN2 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP21, JP32, JP36, JP37, JP38 |
| 6 | IN3 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP13, JP22, JP31, JP39, JP40, JP41 |
| 5 | LP5907MFX-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U6, U7, U8, U9, U10 |
| 4 | 24r | Resistor_SMD:R_0603_1608Metric | R16, R18, R20, R22 |
| 4 | 51r | Resistor_SMD:R_0603_1608Metric | R17, R19, R21, R23 |
| 4 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J4, J6, J8 |
| 4 | TPF141-TR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U11, U12, U13, U15 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R56, R59, R65 |
| 3 | 1u | AAAAAA2:Cap_SMD_0603 | C52, C53, C54 |
| 3 | 33r | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R6, R7, R28 |
| 3 | 75r | Resistor_SMD:R_0603_1608Metric | R13, R14, R15 |
| 3 | VGA_Male | AAAAAA2:VGA_male_rightangle_slim | P1, P2, P3 |
| 2 | 0.1μF | Capacitor_SMD:C_0402_1005Metric | C35, C38 |
| 2 | 10μF | Capacitor_SMD:C_0603_1608Metric | C31, C32 |
| 2 | 1k27 | Resistor_SMD:R_0603_1608Metric | R55, R69 |
| 2 | 1k402 | Resistor_SMD:R_0603_1608Metric | R52, R53 |
| 2 | 1k77 | Resistor_SMD:R_0603_1608Metric | R66, R67 |
| 2 | 20pf | AAAAAA2:Cap_SMD_0603 | C13, C14 |
| 2 | 33r | Resistor_SMD:R_Array_Convex_4x1206 | RN1, RN2 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R54, R68 |
| 2 | 74AHC1G86 | Package_TO_SOT_SMD:SOT-23-5 | U18, U19 |
| 2 | ALSB | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP7, JP12 |
| 2 | DFE252012P-1R0M=P2 | Inductor_SMD:L_1008_2520Metric | L1, L2 |
| 2 | SMD0805B050TF | Fuse:Fuse_0805_2012Metric | F1, F2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R41 |
| 1 | 12nf | AAAAAA2:Cap_SMD_0603 | C12 |
| 1 | 150nf | AAAAAA2:Cap_SMD_0603 | C15 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 170r | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R73 |
| 1 | 1uf | AAAAAA2:Cap_SMD_0603 | C30 |
| 1 | 2.2nf | AAAAAA2:Cap_SMD_0603 | C48 |
| 1 | 215k | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 217179-0001 | SamacSys_Parts:2171790001 | J2 |
| 1 | 2740 | Resistor_SMD:R_0603_1608Metric | R58 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R60 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 510r | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 511 | Resistor_SMD:R_0603_1608Metric | R57 |
| 1 | 511k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 560r | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 680k | Resistor_SMD:R_0603_1608Metric | R71 |
| 1 | 91k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | ABM8AIG-28.63636MHZ-12-2Z-T3 | Library Loader:ABM8AIG25000MHZ122ZT3 | Y1 |
| 1 | ADV7280xCP | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm | U1 |
| 1 | ADV7390BCPZ | Package_CSP:LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U2 |
| 1 | Bypass Stripper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP18 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J7 |
| 1 | DEBUG | CAD:RPi_Pico_SMD_TH | U4 |
| 1 | From Stripper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP20 |
| 1 | LM1881 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | NI | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | Pico | CAD:RPi_Pico_SMD_TH | U3 |
| 1 | RS8752XK | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 1 | TPS2116DRLR | SamacSys_Parts:SOTFL50P160X60-8N | IC1 |
| 1 | TPS62A01ADRLR | SamacSys_Parts:SOTFL50P160X60-6N | IC2 |
| 1 | TPS631000DRLR | SamacSys_Parts:SOTFL50P160X60-8N | U5 |
| 1 | To Stripper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP19 |
| 1 | VS JUMPER | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | VSync | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5 |
Similar boards
- 2 layers50 × 70 mm

- 8 layers280 × 195 mm

- 4 layers150 × 100 mm

Power profiler carrier
Guiimartinho/open-power-profiler
Open-source PPK2-class power profiler built on the Raspberry Pi Pico 2: 100 kSPS, 100 nA to 1 A auto-ranging, source meter and ampere meter modes, USB stream.
425 partsMIT - 4 layers46 × 72 mm

Bosch kf163-control
robinolejnik/bosch-kf163-control
Replacement PLL PCB for Bosch KF83/KF163/KF453 radios
132 partsMIT - 6 layers50 × 60 mm

Tuxkeychain
electron271/tuxkeychain
Keychain shaped like Tux that can run Linux.
56 parts18CC-BY-SA-4.0 - 4 layers190 × 100 mm

Rioctrl controller
festlv/rioctrl-hw
Hardware design for modular CNC controller
281 parts16CERN-OHL-S-2.0 - 4 layers45 × 40 mm

- 4 layers58.4 × 54 mm

Questions
How big is the LumaDoubDevBoard PCB?
It measures 99.5 × 99.5 mm and has 4 copper layers, 1.22 mm thick.
What parts does the LumaDoubDevBoard use?
253 parts, built around the TPF141-TR, ADV7390BCPZ, LM1881 and RS8752XK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LumaDoubDevBoard KiCad files?
From the Shank-Mods/LumaDoub repository on GitHub, at the commit this page was made from: the board is hardware/LumaDoubDevBoard/LumaDoubDevBoard.kicad_pcb and its schematic hardware/LumaDoubDevBoard/LumaDoubDevBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LumaDoubDevBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shank-Mods before reusing the design.