2 layers58.9 × 150.6 mm
2 layers50 × 70 mm
RGB to component
jamvanderloeff/RGB-to-component13- Size
- 50 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 58
- Pads
- 208
- Tracks, vias
- 312, 112
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Mar 2020
- Updated
- 1 Aug 2026
Overview
RGB to component is an open-source printed circuit board by jamvanderloeff, from the jamvanderloeff/RGB-to-component repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 70 mm with 58 parts on 58 nets, routed with 312 tracks and 112 vias.
It is built around the LM1881, RS8752XK and 74HC86D, with the SC6206B-65K5 and THS7374 among its other parts. Its parts include 29 resistors, 13 capacitors, 5 ICs, 4 connectors and 1 diode. It belongs with the lEDs and displays boards of this library.
Main components
5
LM1881
SOP-80℃~+70℃@(Ta) 5V~12V Splitter SOP-8 Video Interface ICs ROHSSlkorVideo Interface ICs
RS8752XK
SOIC-8-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 1.5mV 180V/us 1pA 1pA 2.5V~5.5V 2.9mA 250MHz 4uV/℃ 85dB 85mA 8nV/√Hz@1MHz Built-in compensation Rail-to-rail output SOIC-8 Operational Amplifier ROHSJiangsu RUNIC TechOperational Amplifier
74HC86D
SO-14-40℃~+125℃ 1.5V~4.2V 20ns@6V,50pF 2V~6V 2uA 4 5.2mA 5.2mA 500mV~1.8V 74HC Series XOR Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
SC6206B-65K5
SOT-23-25℃~+85℃ 1 1.8V 18mV@(80mA) 250mA 25uA 50dB@(1kHz) 6V Fixed Over Current Protection、Short Circuit Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSFMVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
THS7374
UncategorisedTexas Instruments
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C8, C10, C11, C12, C13, C14 |
| 7 | 75 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R5, R9, R10, R11, R15 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R14, R19, R20, R24, R101 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3 |
| 2 | 1k27 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13, R28 |
| 2 | 1k402 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7 |
| 2 | 1k77 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25, R26 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R27 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R17 |
| 2 | Conn_Coaxial | videobits:Cheapo_RCA_single_edge | JR1, JU1 |
| 1 | 100u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C7 |
| 1 | 10u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C5 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C9 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L101 |
| 1 | 1k33 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 2740 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22 |
| 1 | 300 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R23 |
| 1 | 3xRCA_CONN | videobits:3xRCA_CONN_SINGLE | J5 |
| 1 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 511 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21 |
| 1 | 680k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R18 |
| 1 | 74HC86 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U10 |
| 1 | Fiducial | videobits:borgar | GOTE2 |
| 1 | Fiducial | videobits:uwuriel | GOTE1 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D101 |
| 1 | LM1881 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | RS8752XK | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | SC6206B-65K5 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | SCART_CONN | custom_components:SCART_CONN | J4 |
| 1 | THS7374 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | USB_C_Receptacle_Power | videobits:USB_C_Receptacle_Generic_Power_Only | J3 |
| 1 | VGA | custom_components:VGA_CONN | J1 |
More from jamvanderloeff/RGB-to-component
1Similar boards
- 4 layers99.5 × 99.5 mm
- 4 layers46 × 72 mm
Bosch kf163-control
robinolejnik/bosch-kf163-control
Replacement PLL PCB for Bosch KF83/KF163/KF453 radios
132 partsMIT - 2 layers50 × 70 mm
Rgbntsc
jamvanderloeff/RGB-to-NTSC
Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using
55 parts17MIT - 6 layers23.5 × 8.4 mm
- 2 layers48.2 × 34.6 mm
- 4 layers177 × 152.1 mm
- 4 layers50 × 50 mm
MegaAV Pro VA0
RIP-Felix/MEGA-AV-main
Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.
181 parts49 - 2 layers105 × 160 mm
Bkm-129x simple
Shank-Mods/Wii-BVM-Card
A simplified version of the BKM-129X compatible board.
132 parts26
Questions
How big is the RGB to component PCB?
It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RGB to component use?
58 parts, built around the LM1881, RS8752XK, 74HC86D and SC6206B-65K5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RGB to component KiCad files?
From the jamvanderloeff/RGB-to-component repository on GitHub, at the commit this page was made from: the board is RGB-to-component.kicad_pcb and its schematic RGB-to-component.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RGB to component design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).