Skip to the content
2 layers48.2 × 34.6 mmRgb2comp, the printed circuit board in 3D

Cheap RGB2Component

Size
48.2 × 34.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
42
Pads
134
Tracks, vias
160, 4
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
26 Mar 2024
Updated
29 Apr 2024

Overview

Rgb2comp is an open-source printed circuit board by shalxmva, from the shalxmva/rgb2component repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 48.2 × 34.6 mm with 38 parts on 42 nets, routed with 160 tracks and 4 vias.

It is built around the LM1881 and THS7374. Its parts include 19 capacitors, 14 resistors, 2 connectors, 1 IC and 1 diode.

Main components

2

README

README.md

rgb2component

Cheap RGB to component transcoder based on dekkit schemati https://github.com/dekkit/RGB-to-Component-Transcoder

-The main goal for this project is to build a tiny board. -Next revisions will replace through hole for smd components

3D View of assembled PCB

Parts

38
QtyValueFootprintReferences
71uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC11, C12, C13, C14, C15, C16, C17
6.1uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2, C3, C4, C5, C18
675Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1, R2, R4, R11, R12, R13
3220uCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC6, C9, C10
21KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR9, R10
22M2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR7, R8
1.047uCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC7
1.1uResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalC19
1100Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR3
110uCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC8
1140Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR14
1330Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR6
1680KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR5
1BA7230LS-WinchesterSymbolsLibrary:ZIP-24V1
1INConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1
1LM1881Package_SO:SO-8_3.9x4.9mm_P1.27mmU1
1OUTPUTConnector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_VerticalJ2
1THS7374Package_SO:TSSOP-14_4.4x5mm_P0.65mmD1

More from shalxmva/rgb2component

1
  • 2 layers48.2 × 34.6 mmRgb2comp smd, the printed circuit board in 3D

    Rgb2comp smd

    shalxmva/rgb2component

    Cheap RGB2Component

    37 parts1BSD-2-Clause

Similar boards

  • 2 layers50 × 70 mmRgbntsc, the printed circuit board in 3D

    Rgbntsc

    jamvanderloeff/RGB-to-NTSC

    Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using

    55 parts17MIT
  • 2 layers50 × 70 mmRGB to component, the printed circuit board in 3D

    RGB to component

    jamvanderloeff/RGB-to-component

    58 parts13MIT
  • 6 layers23.5 × 8.4 mmTa7357, the printed circuit board in 3D

    Ta7357

    ldursw/ta7357p

    Functional replacement for the Toshiba TA7357P sync separator IC

    13 parts4MIT
  • 4 layers50 × 50 mmMegaAV Pro VA0, the printed circuit board in 3D

    MegaAV Pro VA0

    RIP-Felix/MEGA-AV-main

    Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.

    181 parts49
  • 2 layers105 × 160 mmBkm-129x simple, the printed circuit board in 3D

    Bkm-129x simple

    Shank-Mods/Wii-BVM-Card

    A simplified version of the BKM-129X compatible board.

    132 parts26
  • 2 layers160.3 × 25.5 mmN64rgb v3.prod, the printed circuit board in 3D

    N64rgb v3.prod

    borti4938/n64rgb_flex

    This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.

    60 parts24GPL-3.0
  • 2 layers110.6 × 77.9 mmBetsubetsu, the printed circuit board in 3D

    Betsubetsu

    buffis/betsubetsu

    BetsuBetsu is an Open Source Audio+Video splitter for streaming/recording video from Arcade games (Jamma).

    39 parts23
  • 2 layers29 × 46.4 mmCmvs rgb, the printed circuit board in 3D

    Cmvs rgb

    philenotfound/cmvs-rgb

    NEO GEO MVS to SCART converter board

    34 parts23

Questions

How big is the Rgb2comp PCB?

It measures 48.2 × 34.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rgb2comp use?

38 parts, built around the LM1881 and THS7374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rgb2comp KiCad files?

From the shalxmva/rgb2component repository on GitHub, at the commit this page was made from: the board is rgb2comp.kicad_pcb and its schematic rgb2comp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rgb2comp design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).