Skip to the content
2 layers29 × 46.4 mmCmvs rgb, the printed circuit board in 3D

NEO GEO MVS to SCART converter board

Size
29 × 46.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
23
Pads
64
Tracks, vias
120, 9
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
15 Apr 2018
Updated
24 Jul 2019

Overview

Cmvs rgb is an open-source printed circuit board by philenotfound, from the philenotfound/cmvs-rgb repository on GitHub. It is a 2-layer board of 29 × 46.4 mm with 34 parts on 23 nets, routed with 120 tracks and 9 vias.

It is built around the THS7374. Its parts include 12 resistors, 5 capacitors, 2 connectors and 1 IC. It belongs with the lEDs and displays boards of this library.

Main components

1

README

README.md

cmvs-rgb

NEO GEO MVS to SCART converter board

Board front

Parts list:

PartValueFootprint
U1THS7374SSOP14
R1,R2,R3,R46800 Ohm0805
R5430 Ohm0805
R6,R27,R81400 Ohm0805
C1100 nF0805
C2,C3,C4,C5220 uF8x10

Boards can be ordered via PCBWay, OSHPark or somewhere else.

Parts

34
QtyValueFootprintReferences
4220uFCapacitors_SMD:c_elec_8x10C2, C3, C4, C5
46k8Resistors_SMD:R_0805_HandSolderingR1, R2, R3, R4
475RResistors_SMD:R_0805_HandSolderingR9, R10, R11, R12
31k4Resistors_SMD:R_0805_HandSolderingR6, R7, R8
2CONN_01X02Solderpads:SOLDER-JUMPER_1-WAYP1, P2
1+5V_INSolderpads:SolderWirePad_single_SMD_3x5mmW11
1+5V_OUTSolderpads:SolderWirePad_single_SMD_3x5mmW12
10.1uFCapacitors_SMD:C_0805_HandSolderingC1
1430Resistors_SMD:R_0805_HandSolderingR5
1GND_INSolderpads:SolderWirePad_single_SMD_3x5mmW9
1GND_OUTSolderpads:SolderWirePad_single_SMD_3x5mmW10
1Jamma SyncSolderpads:SolderWirePad_single_SMD_3x5mmW4
1Jamma_BlueSolderpads:SolderWirePad_single_SMD_3x5mmW2
1Jamma_GreenSolderpads:SolderWirePad_single_SMD_3x5mmW3
1Jamma_RedSolderpads:SolderWirePad_single_SMD_3x5mmW1
1LOGOcmvs-rgb:logoG***
1SCART_BlueSolderpads:SolderWirePad_single_SMD_3x5mmW6
1SCART_GreenSolderpads:SolderWirePad_single_SMD_3x5mmW7
1SCART_RedSolderpads:SolderWirePad_single_SMD_3x5mmW5
1SCART_SyncSolderpads:SolderWirePad_single_SMD_3x5mmW8
1THS7374Housings_SSOP:SSOP-14_5.3x6.2mm_Pitch0.65mmU1

The 33 most common of 34 parts.

Similar boards

  • 4 layers50 × 50 mmMegaAV Pro VA0, the printed circuit board in 3D

    MegaAV Pro VA0

    RIP-Felix/MEGA-AV-main

    Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.

    181 parts49
  • 2 layers105 × 160 mmBkm-129x simple, the printed circuit board in 3D

    Bkm-129x simple

    Shank-Mods/Wii-BVM-Card

    A simplified version of the BKM-129X compatible board.

    132 parts26
  • 2 layers160.3 × 25.5 mmN64rgb v3.prod, the printed circuit board in 3D

    N64rgb v3.prod

    borti4938/n64rgb_flex

    This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.

    60 parts24GPL-3.0
  • 2 layers110.6 × 77.9 mmBetsubetsu, the printed circuit board in 3D

    Betsubetsu

    buffis/betsubetsu

    BetsuBetsu is an Open Source Audio+Video splitter for streaming/recording video from Arcade games (Jamma).

    39 parts23
  • 2 layers50 × 70 mmRgbntsc, the printed circuit board in 3D

    Rgbntsc

    jamvanderloeff/RGB-to-NTSC

    Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using

    55 parts17MIT
  • 2 layers80 × 65.4 mmSCART Splitter, the printed circuit board in 3D

    SCART Splitter

    arithmaldor/SCART-Splitter

    A simple THS7374 based SCART splitter, can easily be adapter to a variety of connectors.

    44 parts15
  • 2 layers50 × 70 mmComprgb, the printed circuit board in 3D

    Comprgb

    jamvanderloeff/Component-to-RGB

    Component to RGB transcoder using LMH1251

    46 parts14MIT
  • 2 layers50 × 70 mmRGB to component, the printed circuit board in 3D

    RGB to component

    jamvanderloeff/RGB-to-component

    58 parts13MIT

Questions

How big is the Cmvs rgb PCB?

It measures 29 × 46.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cmvs rgb use?

34 parts, built around the THS7374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cmvs rgb KiCad files?

From the philenotfound/cmvs-rgb repository on GitHub, at the commit this page was made from: the board is cmvs-rgb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cmvs rgb design in my own project?

Its repository states no licence, so its author keeps all rights: ask philenotfound before reusing the design.