arithmaldor/SCART-Splitter15A simple THS7374 based SCART splitter, can easily be adapter to a variety of connectors.
SCART Splitter is an open-source printed circuit board by arithmaldor, from the arithmaldor/SCART-Splitter repository on GitHub. It is a 2-layer board of 80 × 65.4 mm with 44 parts on 64 nets, routed with 261 tracks and 26 vias.
It is built around the THS7374. Its parts include 17 resistors, 15 capacitors, 4 connectors, 1 IC and 1 switch.
This is a simple SCART splitter based on the THS7374. The circuit is is AC-bias mode so component video will be properly driven. It can be easily adapted for a variety of connectors; RCA, BNC, VGA, whatever you need. Audio is simply connected to both outputs so might be a bit quiet.
This was loosely based on Voultar's open source Dual Output board. Special thanks also to RetroRGB; thanks to examining the 2DVI boards I gained a better understanding of these circuits.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 75 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | 220uF | Capacitor_SMD:CP_Elec_8x10 | C8, C9, C10, C11, C12, C13, C14, C15 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C5, C6, C7 |
| 4 | 5.6M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R8, R9 |
| 3 | SCART-F | SCART to DVI-A Compact:SCART-F | J1, J3, J4 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | 220 | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 1 | SW_DPDT_x2 | SCART to DVI-A Compact:JS202011 | SW1 |
| 1 | THS7374 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
The 39 most common of 44 parts.
RIP-Felix/MEGA-AV-main
Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.
Shank-Mods/Wii-BVM-Card
A simplified version of the BKM-129X compatible board.
borti4938/n64rgb_flex
This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.
buffis/betsubetsu
BetsuBetsu is an Open Source Audio+Video splitter for streaming/recording video from Arcade games (Jamma).
jamvanderloeff/RGB-to-NTSC
Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using
It measures 80 × 65.4 mm and has 2 copper layers, 1.6 mm thick.
44 parts, built around the THS7374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the arithmaldor/SCART-Splitter repository on GitHub, at the commit this page was made from: the board is SCART Splitter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask arithmaldor before reusing the design.
