Skip to the content
2 layers50 × 70 mmRgbntsc, the printed circuit board in 3D

Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using

Size
50 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
67
Pads
212
Tracks, vias
261, 152
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Aug 2020
Updated
5 Oct 2025

Overview

Rgbntsc is an open-source printed circuit board by jamvanderloeff, from the jamvanderloeff/RGB-to-NTSC repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 70 mm with 55 parts on 67 nets, routed with 261 tracks and 152 vias.

It is built around the LM1881, 74AHCT1G86GV and THS7374, with the S5D3.579545A20F30T among its other parts. Its parts include 20 resistors, 17 capacitors, 5 ICs, 4 connectors and 1 diode.

Main components

4

README

README.md

RGB-to-NTSC

Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using

Parts

55
QtyValueFootprintReferences
1075Resistor_SMD:R_0805_2012MetricR1, R6, R7, R10, R12, R13, R14, R18, R19, R20
6100nCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C8, C11
61uCapacitor_SMD:C_0805_2012MetricC5, C6, C7, C15, C16, C17
3180Resistor_SMD:R_0805_2012MetricR15, R16, R17
31kResistor_SMD:R_0805_2012MetricR5, R21, R22
3220uCapacitor_SMD:CP_Elec_6.3x5.4C12, C13, C14
3Conn_Coaxialvideobits:Cheapo_RCA_single_edgeJR1, JR2, JU1
25k1Resistor_SMD:R_0805_2012MetricR2, R3
274AHCT1G86Package_TO_SOT_SMD:SOT-23-5U2, U3
2Ferrite_Bead_SmallCapacitor_SMD:C_0805_2012MetricFB1, FB2
110uCapacitor_SMD:C_0805_2012MetricC10
133uCapacitor_SMD:CP_Elec_6.3x7.7C9
13k3Resistor_SMD:R_0805_2012MetricR11
1680kResistor_SMD:R_0805_2012MetricR4
1CXA2075Package_SO:SO-24_5.3x15mm_P1.27mmU5
1Fiducialvideobits:uwurielGOTE1
1Jumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mmJP1
1LEDLED_SMD:LED_0805_2012MetricD1
1LM1881Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1Mini-DIN-4videobits:CUI_MD-40SMJ4
1S5D3.579545A20F30TOscillator:Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mmX1
1SCART_CONNcustom_components:SCART_CONNJ3
1THS7374Package_SO:TSSOP-14_4.4x5mm_P0.65mmU4
1USB_C_Receptacle_Powervideobits:USB_C_Receptacle_Generic_Power_OnlyJ1
1VGAcustom_components:VGA_CONNJ2

Similar boards

  • 4 layers17.6 × 40 mmPandora mcu cc1352p7, the printed circuit board in 3D

    Pandora mcu cc1352p7

    anobli/pandora-hw

    Open hardware designs for user-controlled smart home devices. Zephyr RTOS + Thread/WiFi connectivity. No cloud dependency, no vendor lock-in.

    58 parts3CERN-OHL-S-2.0
  • 2 layers165.1 × 114.3 mmACE3NOKB, the printed circuit board in 3D

    ACE3NOKB

    flypie/Ace-2019

    Reimplimentation of the Jupiter ACE with slightly more modern hardware. https://www.jupiter-ace.co.uk/ the KiCad versions are the up to date designs which are available at https://jupiterdeuce.blogspot.com and…

    148 parts13GPL-3.0
  • 2 layers50 × 70 mmRGB to component, the printed circuit board in 3D

    RGB to component

    jamvanderloeff/RGB-to-component

    58 parts13MIT
  • 6 layers23.5 × 8.4 mmTa7357, the printed circuit board in 3D

    Ta7357

    ldursw/ta7357p

    Functional replacement for the Toshiba TA7357P sync separator IC

    13 parts4MIT
  • 2 layers48.2 × 34.6 mmRgb2comp, the printed circuit board in 3D

    Rgb2comp

    shalxmva/rgb2component

    Cheap RGB2Component

    38 parts1BSD-2-Clause
  • 4 layers50 × 50 mmMegaAV Pro VA0, the printed circuit board in 3D

    MegaAV Pro VA0

    RIP-Felix/MEGA-AV-main

    Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.

    181 parts49
  • 2 layers105 × 160 mmBkm-129x simple, the printed circuit board in 3D

    Bkm-129x simple

    Shank-Mods/Wii-BVM-Card

    A simplified version of the BKM-129X compatible board.

    132 parts26
  • 2 layers160.3 × 25.5 mmN64rgb v3.prod, the printed circuit board in 3D

    N64rgb v3.prod

    borti4938/n64rgb_flex

    This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.

    60 parts24GPL-3.0

Questions

How big is the Rgbntsc PCB?

It measures 50 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rgbntsc use?

55 parts, built around the LM1881, 74AHCT1G86GV, THS7374 and S5D3.579545A20F30T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rgbntsc KiCad files?

From the jamvanderloeff/RGB-to-NTSC repository on GitHub, at the commit this page was made from: the board is rgbntsc.kicad_pcb and its schematic rgbntsc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rgbntsc design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).