

Bkm-129x simple
A simplified version of the BKM-129X compatible board.
- Size
- 105 × 160 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 132
- Nets
- 112
- Pads
- 463
- Tracks, vias
- 911, 101
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Jan 2023
- Updated
- 3 Mar 2023
Overview
Bkm-129x simple is an open-source printed circuit board by Shank-Mods, from the Shank-Mods/Wii-BVM-Card repository on GitHub. It is a 2-layer board of 105 × 160 mm with 132 parts on 112 nets, routed with 911 tracks and 101 vias.
It is built around the 74LVC125AD, TPS25221DRV and ADG1611BRU, with the THS7374 and DTC144EKA among its other parts. Its parts include 51 resistors, 29 capacitors, 14 ICs, 8 diodes and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
574LVC125AD
SOP-14L-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5V,15pF 4 40uA 50mA 50mA 74LVC Schmitt trigger Tri-State Unidirectional SOP-14L Buffers, Drivers, Receivers, Transceivers ROHSMDDBuffers, Drivers, Receivers, TransceiversTPS25221DRV
WSON-6-EP(2x2)-40℃~+125℃ 1 2.5V~5.5V 2A 70mΩ Active High Low Side Switch WSON-6-EP(2x2) Power Distribution Switches ROHSTexas InstrumentsPower Distribution SwitchesADG1611BRU
TSSOP161 Ohm Typical On Resistance, +3.3 V, ±5 V, +12 V Quad SPST Switches (Normally Closed)Analog DevicesUncategorisedTHS7374
UncategorisedTexas InstrumentsDTC144EKA
SOT-23-3L1 1 NPN (Pre-Biased) 250MHz 300mV@10mA,0.5mA 30mA 3V@2mA,0.3V 47kΩ 500mV@100uA,5V 50V 68 NPN SOT-23-3L Digital Transistors ROHSCBIDigital Transistors
README
RVL-129X/README.mdA simplified version of the BKM-129X compatible board.
Should be able to be created at $25-30, with the ADG1611 being the most expensive component.
This requires an Arduino Nano v3 loaded with the latest BKM-129X-MCU code from https://github.com/skumlos/bkm-129x-mcu
For more information go to https://immerhax.com/?p=422
You are welcome to clone, produce and sell hardware based on this. Please keep changes and so on open source.
Cool kids give credit where due.
Thanks goes out to Nick Carney and Bob from RetroRGB for rigorious testing!
Compatibility list and tested consoles (including issues):
PVM-9L2
- SNES (US region, CSYNC)
- Mega Drive 2 (EU region, 60 Hz modded with DFO for "true" 60 Hz, CSYNC)
- Master System 1 (EU region, 60 Hz modded with DFO for "true" 60 Hz, CSYNC)
- PC-Engine (White, with THS7374 external RGB amp, CSYNC)
BVM-D14
- Genesis 1 (60 Hz, CSYNC)
BVM-D9
- Nomad (60 Hz, Triple bypass modded, CSYNC)
- SNES (US region, CSYNC)
- Master System (60 Hz, sync issues like original 129X)
- TurboGrafx/PC-Engine (60 Hz, sync issues like original 129X)
Board revision history:
D: Fix THS7374 filter bypass, move to Kicad 5
C: Rearranged some components for nicer layout
B: Added R29, R30, R31 to compensate for overbrightness
A: Changed R9 to 0 Ohm / jumper
Copyright © 2020 Martin Hejnfelt martin@hejnfelt.com This work is free. You can redistribute it and/or modify it under the terms of the Do What The Fuck You Want To Public License, Version 2, as published by Sam Hocevar. See the LICENSE file for more details.
Parts
132| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | R | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R14, R15, R16, R17, R32, R33, R34, R35, R36, R37, R38, R39, R40 +8 |
| 16 | C | Capacitor_SMD:C_0603_1608Metric | C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 |
| 14 | TestPoint | TestPoint:TestPoint_Pad_D2.5mm | TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 |
| 8 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C5, C6, C9, C12 |
| 8 | D | Diode_SMD:D_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 8 | TPS25221 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U6, U7, U8, U9, U10, U11, U12, U13 |
| 6 | 150R | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R29, R30, R31 |
| 4 | 100K | Resistor_SMD:R_0603_1608Metric | R20, R22, R25, R27 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R21, R24, R26, R28 |
| 4 | 75R | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13 |
| 4 | R | Resistor_SMD:R_0402_1005Metric | R48, R49, R50, R51 |
| 3 | 100uF | Capacitors_SMD:CP_Elec_6.3x5.3 | C7, C8, C13 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D3.0mm | TP1, TP2, TP3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R18 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R19, R23 |
| 2 | GC_Ports | All of it:GCC Ports | CN1, CN2 |
| 1 | |||
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C11 |
| 1 | 2.2uF | Capacitors_SMD:C_0805_HandSoldering | C10 |
| 1 | 74LVC125 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U4 |
| 1 | ADG1611 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U1 |
| 1 | Conn_02x32_Row_Letter_Last | din-41612-64p-ra:DIN-41612-64P | J5 |
| 1 | DTC144EKA | Package_TO_SOT_SMD:SC-59_Handsoldering | Q1 |
| 1 | MIC3490-3.3 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | PWP2_HeadphoneJackWithSwitch | All of it:HPJack | U14 |
| 1 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | J1 |
| 1 | THS7374 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U2 |
| 1 | arduino-nano-v3 | arduino-nano-v3:arduino-nano-v3 | U3 |
The 125 most common of 132 parts.
Similar boards
- 2 layers105 × 160 mm

- 2 layers106.7 × 101.1 mm

- 2 layers427.6 × 118.1 mm

- 4 layers50 × 50 mm

MegaAV Pro VA0
RIP-Felix/MEGA-AV-main
Timeline of events: ACE9921 & Villahed94 developed the original Mega Amp 1.0. Inception for a mod board that combines the Mega Amp with an RGB video amplifier was Bob from RetroRGB's idea.
181 parts49 - 2 layers160.3 × 25.5 mm

N64rgb v3.prod
borti4938/n64rgb_flex
This repository contains all you need files to build your own DIY N64RGBv3 / N64RGBFlex board. Firmware is supplied in this repository, too.
60 parts24GPL-3.0 - 2 layers110.6 × 77.9 mm

Betsubetsu
buffis/betsubetsu
BetsuBetsu is an Open Source Audio+Video splitter for streaming/recording video from Arcade games (Jamma).
39 parts23 - 2 layers29 × 46.4 mm

- 2 layers50 × 70 mm

Rgbntsc
jamvanderloeff/RGB-to-NTSC
Converts RGB 15kHz video in the form of VGA or SCART into NTSC and/or PAL composite and s-video using
55 parts17MIT
Questions
How big is the Bkm-129x simple PCB?
It measures 105 × 160 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bkm-129x simple use?
132 parts, built around the 74LVC125AD, TPS25221DRV, ADG1611BRU and THS7374. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bkm-129x simple KiCad files?
From the Shank-Mods/Wii-BVM-Card repository on GitHub, at the commit this page was made from: the board is RVL-129X/bkm-129x-simple.kicad_pcb and its schematic RVL-129X/bkm-129x-simple.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bkm-129x simple design in my own project?
Its repository states no licence, so its author keeps all rights: ask Shank-Mods before reusing the design.