Skip to the content

Boards using the BZT52C3V3

15 boards

Boards in 14 GitHub repositories, designed in KiCad, that use the BZT52C3V3 by Jiangsu Changjing Electronics Technology (CJ) (-55℃~+150℃ 1 Independent 3.1V~3.5V 3.3V 500mW 5uA 600Ω 95Ω SOD-123 Zener Diodes ROHS). See how each wires it, with its parts, size, README and files; the BZT52C3V3’s symbol, footprint and pinout are on its own page.

  • 2 layers114.9 × 76 mmProtected power entry, the printed circuit board in 3D

    Protected power entry

    absmach/synth

    Open-source circuit compiler for engineers and AI agents

    84 parts29Apache-2.0
  • 2 layers41 × 87 mmDif pressure meter, the printed circuit board in 3D

    Dif pressure meter

    ardiloot/dif-pressure-meter

    ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).

    68 parts23MIT
  • 2 layers100 × 79.7 mmFanController, the printed circuit board in 3D

    FanController

    Matesxs/ESP32FanController

    ESP32 10 Channel PWM Fan Controller

    164 parts7MIT
  • 2 layers64 × 39 mmDAP405, the printed circuit board in 3D

    DAP405

    SushiBits/DAP405

    USB High-Speed CMSIS-DAP debugger based on STM32F405

    50 parts3
  • 2 layers100 × 100 mmCOPIE 0, the printed circuit board in 3D

    COPIE 0

    AssaadMH/shadow-4wd-motor-shield-pcb

    The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.

    154 parts2MIT
  • 4 layers66 × 66 mmOpenTurn, the printed circuit board in 3D

    OpenTurn

    OpenTurn/OpenTurn_PSoC

    OpenTurn is a closed loop servo controller for BLDCs developed for robotics application.

    165 parts1
  • 2 layers110 × 85 mmAvtech agv carrier, the printed circuit board in 3D

    Avtech agv carrier

    eerdemgundogdu/avtech-agv-main

    Software and carrier PCB design for a line-following forklift AGV built by CU AVTECH for the Sanayide Robotik Uygulamalar 2026 competition.

    84 partsMIT
  • 2 layers73.3 × 58.2 mmPower electronics converter, the printed circuit board in 3D

    Power electronics converter

    JLJ-V14/Synchronous-Buck-converter

    A synchronous buck converter project built from the ground up to practice power stage design, feedback control implementation, and real-time embedded firmware development.

    88 parts
  • 4 layers85 × 54 mmIntegrated motor controller, the printed circuit board in 3D

    Integrated motor controller

    kgieselman/integrated_motor_controller_pcb

    Integrated Motor Controller for a robotics competion hosted by my work. The competitions changes each year so this board is flexible and contains mutliple headers for expanding to daughter boards.

    150 partsCERN-OHL-S-2.0
  • 2 layers150 × 100 mm4hbd base, the printed circuit board in 3D

    4hbd base

    krtkr/4hbd

    4 Halfbridge Driver board schematics and PCB files, KiCAD

    198 partsApache-2.0
  • 2 layersMotorDriver, the printed circuit board in 3D

    MotorDriver

    oosan1/OU_simpleMotorDriver

    75 parts
  • 2 layers80.5 × 45.1 mmRa5 2022, the printed circuit board in 3D

    Ra5 2022

    pedrohqr/ra5_2022_m

    Base/carrier board for a modular PLC (Programmable Logic Controller): an I/O front-end with no main MCU of its own — sensing and metering peripherals are driven by a separate MCU+LTE modem card that plugs into the…

    154 parts
  • 4 layers96.3 × 71 mmEnvDaqBox, the printed circuit board in 3D

    EnvDaqBox

    Yongci/EnvDaqBox-PCB

    This is a development board designed for automated flower watering or smart agriculture, primarily used for controlling the watering and lighting systems. It is currently under development.

    96 partsApache-2.0
  • 4 layersAnalog frontend panel, the printed circuit board in 3D

    Analog frontend panel

    deimoscontrols/deimos

    Realtime data acquisition and controls ecosystem, including hardware, firmware, and software.

    308 parts44
  • 2 layers100 × 110 mmSHADOW 4WD Shield, the printed circuit board in 3D

    SHADOW 4WD Shield

    AssaadMH/shadow-4wd-motor-shield-pcb

    The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.

    118 parts2MIT