
Protected power entry
absmach/synth
Open-source circuit compiler for engineers and AI agents
Jiangsu Changjing Electronics Technology (CJ)Extended
-55℃~+150℃ 1 Independent 3.1V~3.5V 3.3V 500mW 5uA 600Ω 95Ω SOD-123 Zener Diodes ROHS
The BZT52C3V3 is a zener Diode made by Jiangsu Changjing Electronics Technology (CJ) in a SOD-123 package with 2 pins. -55℃~+150℃ 1 Independent 3.1V~3.5V 3.3V 500mW 5uA 600Ω 95Ω SOD-123 Zener Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Zener, from KiCad's library) and its footprint (Diode_SMD:D_SOD-123, from KiCad's library), ready for a KiCad board. 26,085 are in stock at JLCPCB (part C2112). 15 open-source boards in 14 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Forward Voltage (Note 2) VF | IF = 10mA; short duration test pulse | max 0.9 V | 1 |
| Power Dissipation(Note 1) PD | Ta=25℃; mounting per Note 1 | max 500 mW | 1 |
| Thermal Resistance from Junction to Ambient(Note 1) RθJA | SOD-123; Ta=25℃; mounting per Note 1 | max 250 ℃ /W | 1 |
| Operation Junction and Storage Temperature Range TJ,TSTG | min -55 · max 150 ℃ | 1 | |
| Zener Voltage Range (Note 2) VZ@IZT | BZT52C3V3; Ta=25℃; IZT=5 mA; nominal 3.3 V; short duration test pulse | min 3.1 · max 3.5 V | 2 |
| Maximum Zener Impedance ZZT@IZT | BZT52C3V3; Ta=25℃; IZT=5 mA; f=1kHZ | max 95 Ω | 2 |
| Maximum Zener Impedance ZZK@IZK | BZT52C3V3; Ta=25℃; IZK=1.0 mA; f=1kHZ | max 600 Ω | 2 |
| Maximum Reverse Current IR | BZT52C3V3; Ta=25℃; VR=1.0 V; short duration test pulse | max 5 uA | 2 |
| Typical Temperature Coefficent | BZT52C3V3; IZTC=5 mA | min -3.5 · max 0 mV/°C | 2 |

absmach/synth
Open-source circuit compiler for engineers and AI agents

ardiloot/dif-pressure-meter
ESP32 based differential pressure (and air flow) meter. Handheld, battery powered DIY device for measuring small pressure differences (Sensirion SDP810-500Pa).



AssaadMH/shadow-4wd-motor-shield-pcb
The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.

OpenTurn/OpenTurn_PSoC
OpenTurn is a closed loop servo controller for BLDCs developed for robotics application.

eerdemgundogdu/avtech-agv-main
Software and carrier PCB design for a line-following forklift AGV built by CU AVTECH for the Sanayide Robotik Uygulamalar 2026 competition.

JLJ-V14/Synchronous-Buck-converter
A synchronous buck converter project built from the ground up to practice power stage design, feedback control implementation, and real-time embedded firmware development.
Yes. The symbol is Device:D_Zener and the footprint Diode_SMD:D_SOD-123, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOD-123, with 2 pins. Its footprint is drawn on this page.
Jiangsu Changjing Electronics Technology (CJ) publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2112, with 26,085 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the BZT52B3V3 by hongjiacheng, the BZT52C3V3 by MDD, the MMSZ5226B by onsemi and the MM1Z3V3 by hongjiacheng. Check their datasheets: a part that fits the footprint may still differ in its ratings.
15 boards in 14 repositories on GitHub; the most starred are listed on this page, with their KiCad files.