
Microduck Power Regen R22
ldcyes/OpenDuck
已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²,比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²(7.20%)。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留,回生电容采用原料号卧装,J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选,未制造,未完成热、回生瞬态、低电量或行走验收。

A synchronous buck converter project built from the ground up to practice power stage design, feedback control implementation, and real-time embedded firmware development.
Power electronics converter is an open-source printed circuit board by JLJ-V14, from the JLJ-V14/Synchronous-Buck-converter repository on GitHub. It is a 2-layer board of 73.3 × 58.2 mm with 88 parts on 75 nets, routed with 238 tracks and 93 vias.
It is built around the IRS21867S, MCP3204-CI/P and INA300AIDGSR, with the TL431D, BSC082N10LS G and BZT52C3V3 among its other parts. Its parts include 28 resistors, 26 capacitors, 8 ICs, 4 diodes and 4 connectors. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R8, R10, R13, R15, R17, R18, R22 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C18, C19 |
| 4 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C22, C23, C24 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_6.4mm_M6_ISO14580_Pad | H6, H7, H8, H9 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R27, R28 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13, C14 |
| 3 | 1k5 | Resistor_SMD:R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R1, R3, R4 |
| 3 | 39k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R16 |
| 3 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 2 | 47 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19, R20 |
| 2 | BSC082N10LSG | Package_TO_SOT_SMD:TDSON-8-1 | Q1, Q2 |
| 2 | BZT52C3V3 | Diode_SMD:D_SOD-123F | D2, D3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.7 | C25 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C21 |
| 1 | 10m | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 11k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21 |
| 1 | 120R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23 |
| 1 | 200 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R26 |
| 1 | 200 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 22 uH | Library:INDUCTOR_TDK_BUCK | L1 |
| 1 | 27.1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 2u | Library:SC63CB | L2 |
| 1 | ABLS2-8.000MHZ-D4Y-T | Library:XTAL_ABLS2-8.000MHZ-D4Y-T | Y2 |
| 1 | Fuse | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | F1 |
| 1 | INA180A3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | INA300AIDGSR | Library:SOP50P490X110-10N-INA300 | U6 |
| 1 | IRS2186 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U2 |
| 1 | LM66200DRLR | Package_TO_SOT_SMD:SOT-583-8 | IC1 |
| 1 | MCP3204 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | NCP18XH103F03RB | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | NTC1 |
| 1 | Q_SCR_KAG | Library:NYC222_THYRISTOR_FOOTPRINT | D4 |
| 1 | RED_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | footprints:CON64_2X32_TU_HTS_SAI_CUSTOM | SW1 |
| 1 | TL431D | Library:LM431 | U7 |
| 1 | TLV70012_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TestPoint | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP6 |
| 1 | USB_B_Micro | usb_b:CONN_10118194-0001LF_AMP | J1 |

ldcyes/OpenDuck
已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²,比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²(7.20%)。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留,回生电容采用原料号卧装,J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选,未制造,未完成热、回生瞬态、低电量或行走验收。

Cameron-Ray/IrrigationPiHat
Irrigation System μPiHAT for hobby or scientific use. This repo provides a full design process to create your own μPiHAT PCB from scratch.

AidarIglesias/Projecte_Neteja_Parabrises
El sistema ha de complir les seguents especificacions:



nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…

supermileage/UrbanMotorControllerPCB
This is the repo for the Urban Motor Controller PCB. You can find the KiCad files here.

G-Pereira/greenmobi-drive
A FOC motor drive compatible with VESC
It measures 73.3 × 58.2 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the IRS21867S, MCP3204-CI/P, INA300AIDGSR and TL431D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JLJ-V14/Synchronous-Buck-converter repository on GitHub, at the commit this page was made from: the board is Power electronics converter.kicad_pcb and its schematic Adc_sensing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JLJ-V14 before reusing the design.