
RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
Boards in 235 GitHub repositories, designed in KiCad, that use the BMP280 by Bosch (-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHS). See how each wires it, with its parts, size, README and files; the BMP280’s symbol, footprint and pinout are on its own page.

pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware


phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.

TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.




ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.

danheeks/vario
paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys


rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.





phonght32/OpenDrone_HW_FC_F405
OpenDrone Project - Fly Controller hardware using STM32F405RG.

plantbot/core_pcb
A WiFi powered environmental sensor board for your house plants & hydroponic systems

Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI




dshills/KiCadAI
AI-assisted KiCad design toolkit with Go CLI, direct schematic/PCB writers, validation, and pinmap checks.

ammarjmahmood/FPVDronePCB
All-in-one FPV drone PCB with integrated flight controller, PDB, and ESCs built around STM32F411.