WS2812

40 boards

KiCad boards from 23 GitHub repositories tagged “ws2812”, the most starred first; open any of them in PCBKit.

2 layers49.4 × 35.8 mm
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes
22 parts82MIT
2 layers26.9 × 73.9 mm
WS2812ControllerEthernet
klein0r/pcb-ws2812-ethernet-controller
Ethernet Controller for WS2812 LED Stripes
12 parts38MIT
2 layers69.3 × 80 mm
Laemp led board
Jana-Marie/LAEMP-Prism
The LÄMP-Prism is an aesthetically pleasing and colorful effect lamp that can be used in your home.
90 parts33CERN-OHL-S-2.0
2 layers60 × 50 mm
Driver wide
brainsmoke/leddriver3d
Renamed from esp32leddriver because it also contains code and PCBs for other MCUs
73 parts11
2 layers100 × 100 mm
WLEDController
LostInCompilation/WLED-Controller-PCB
WLED Controller Board with ESP32 - 4 Channels - Current and Power Monitoring - INMP441 Microphone
69 parts8
2 layers
37c3PCBLEDC100R Rev.1
c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.
25 parts7CC-BY-4.0
2 layers40.6 × 65.5 mm
ColoLightCustom
klein0r/pcb-cololight-custom
Build your own controller for the SmartLife ColoLight LS160 with this connector PCB
6 parts6MIT
2 layers76.2 × 46.9 mm
IoT Messenger
PR77/IoT_Messenger
IoT Messenger (Pager) For Simple 1 Way Communication
64 parts3LGPL-3.0
4 layers80 × 40 mm
Stm32g0
stefan-misik/ws2812b-light
Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070
84 parts3MIT
2 layers
LED CUBE PCB
ladyM9/Led_cube
LED CUBE based on STM32F103C8T6 (Blue-Pill)
53 parts2
2 layers30.5 × 30.5 mm
Kombo TP4056 m
MelexinVN/bs_kombo_sidru
Декоративное устройство на микроконтроллере STM32 и адресных светодиодах WS2812, управляемое по радиоканалу радиомодулем NRF24L01+.
9 parts2GPL-3.0
2 layers65.5 × 55 mm
GD32F207RG Pixel-8
vanvught/KiCad-GD32F207RG-Pixel-8
KiCad GD32F207RG Pixel 8-ports x 4 Universes
43 parts2MIT
2 layers
38c3PCBLEDC100R Rev.0
c3re/38c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.
28 parts1CC-BY-4.0
2 layers48 × 10 mm
Tinyneostick
todbot/tinyneostick
Neopixel stick with 16 WS2812-2020 LEDs in 48mm x 10mm
18 parts1GPL-3.0
2 layers84.8 × 62.1 mm
DMX Pixel-1
vanvught/KiCad-DMX-Pixel-1
KiCad DMX Pixel 1 Port
44 parts1MIT
2 layers96 × 110.1 mm
GD32F470VG Pixel-16
vanvught/Kicad-GD32F470VG-Pixel-16
Kicad GD32F470VG Pixel 16-ports x 4 Universes
113 parts1MIT
2 layers35 × 20 mm
Tester
brainsmoke/ws2812tester
Padauk based WS2812 LED tester
13 parts
2 layers53 × 50 mm
Sunmachine A2
gblach/Sunmachine-A2-pcb
The driver for WS2812, SK6812 or similar LED strips controlled via Bluetooth LE. It supports both RGB and WWA LEDs.
18 parts
2 layers18 × 17.4 mm
Iris ring
HeyPCB/iris-ring
Iris Ring: the 18 mm annular LED board behind each iris of the Iris robot head. 12 WS2812-2020 pixels around the camera lens. 2-layer, 0.8 mm KiCad 10 board, DRC-clean, with gerbers, BOM, CPL, STEP and renders.
30 partsCERN-OHL-S-2.0
2 layers57.6 × 53.9 mm
LEDController
Hydr0neFN/LightController
ESP32-C3 LED controller with USB-C PD input, HomeKit native, KiCad PCB design
37 partsMIT
2 layers42.6 × 15.2 mm
Lightball
Jana-Marie/lightball
Replacement PCB for those cheap "flying balls" from AliExpress
47 parts
4 layers100 × 80 mm
BluePixelMatrix
SimulatedFlow/kicad-board-2026-07-27-bluepixelmatrix
BluePixelMatrix - STM32 Bluepill addressable RGB pixel matrix board. Hand-solderable THT, bare PCB. KiCad source files.
142 parts
2 layers35 × 21.4 mm
Air Quality Sensor
Szymon423/Air-Quality-Sensor
Open-hardware indoor air quality monitor: ESP32-S3, SCD41 CO₂, SHT4x temp/humidity, SPA06 pressure, WS2812 LED ring. Round PCB in KiCad, 3D-printed enclosure.
114 parts
2 layers69.3 × 80 mm
Laemp base
Jana-Marie/LAEMP-Prism
The LÄMP-Prism is an aesthetically pleasing and colorful effect lamp that can be used in your home.
52 parts33CERN-OHL-S-2.0