Skip to the content
2 layers49.4 × 35.8 mmWS2812Controller, the printed circuit board in 3D

WiFi Controller for WS2812 LED Stripes

Size
49.4 × 35.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
32
Pads
82
Tracks, vias
107, 10
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Dec 2019
Updated
28 Jan 2026

Overview

WS2812Controller is an open-source printed circuit board by klein0r, from the klein0r/pcb-ws2812-wifi-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 49.4 × 35.8 mm with 22 parts on 32 nets, routed with 107 tracks and 10 vias.

It is built around the ESP-12F, SN74AHCT125N and AMS1117-3.3. Its parts include 6 resistors, 3 capacitors, 3 ICs, 3 connectors and 2 switches. It belongs with the lEDs and displays and radio and wireless boards and the ESP8266 boards of this library.

Main components

3

README

README.md

WS2812 / SK6812 Wifi Controller Custom PCB

Control your addressable LED with custom software like WLED

Gerber-Files

Preview

PCB Preview

PCB Photo

Components

  • C1, C2: Capacitor 0805 100nF
  • C3: Capacitor Radial 3.8mm 1000μF 6.3
  • F1: Stelvio Kontek STV PTF/75 + Fuse 5x20mm, 5A (max. 6A)
  • J1: PHC 1725672 - MPT 0,5 / 4-2,54
  • J2: 1x5 2.54mm Male Pin Headers (for flashing - soldering not required)
  • J3: PHC 1725669 - MPT 0,5 / 3-2,54
  • R1, R2, R3, R4, R5: Resistor 0805 10k
  • R6: Resistor 0805 330
  • SW1, SW2: Push Button 362.5mm
  • U1: AMS1117-3.3 SOT 223
  • U2: ESP-12F
  • U3: SN74AHCT125DR

GPIO

  • GPIO4 = Data line of addressable strip

Cases

Older Versions

See git tag / releases

0.1

PCB Preview

0.2

PCB Preview

0.3

PCB Preview

0.4

PCB Preview

License

The MIT License (MIT)

Copyright (c) 2026 Matthias Kleine info@haus-automatisierung.com

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Parts

22
QtyValueFootprintReferences
510kΩResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4, R5
2100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C2
11000µFCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC3
1330ΩResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1Conn_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_HorizontalJ3
1Conn_01x04_MaleTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_HorizontalJ1
1Conn_01x05_MaleConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1ESP-12FRF_Module:ESP-12EU2
1Fusehalibs:Fuse-PTF75_StelvioF1
1LOGOhaus-automatisierung:Logo2024G***
1SN74AHCT125haus-automatisierung:SN74AHCT125DU3
1SW_GPIO0Button_Switch_SMD:SW_SPST_CK_RS282G05A3SW2
1SW_ResetButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1

The 19 most common of 22 parts.

Similar boards

  • 2 layers69.9 × 69.9 mmVelux controller, the printed circuit board in 3D

    Velux controller

    thorio/esphome-projects

    collection of open home automation projects

    35 parts29GPL-3.0
  • 2 layers73.1 × 18.3 mmRJ10Adapter, the printed circuit board in 3D

    RJ10Adapter

    klein0r/pcb-ttl-ftdi-esp-adapter

    PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)

    16 parts25MIT
  • 4 layers44.5 × 22.5 mmIkea fyrtur, the printed circuit board in 3D

    Ikea fyrtur

    mjuhanne/ikea-fyrtur

    ESP8266 WiFi module PCB for Ikea Fyrtur blinds

    46 parts23MIT
  • 2 layers84.3 × 56.9 mmEbus, the printed circuit board in 3D

    Ebus

    piwko28/smart-home-ebus-adapter

    eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.

    51 parts18GPL-3.0
  • 2 layers67.1 × 62.2 mmFeinstaub, the printed circuit board in 3D

    Feinstaub

    str-dst/feinstaub

    piggyback PCB for the SDS011 sensor

    14 parts8CC-BY-SA-4.0
  • 2 layers63.9 × 81.7 mmWifi modem, the printed circuit board in 3D

    Wifi modem

    hanshuebner/wifi-modem

    PCB to be used with Zimodem

    56 parts6
  • 2 layers80 × 48.8 mmESP8266-Sentinel Kinetic Wired Remote, the printed circuit board in 3D

    ESP8266-Sentinel Kinetic Wired Remote

    alextrical/ESP8266-Sentinel-Kinetic-Wired-Remote

    ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller

    48 parts4CERN-OHL-S-2.0
  • 2 layers78.7 × 58.4 mm40Hz, the printed circuit board in 3D

    40Hz

    oponyx/40HzGen

    Advanced ESP based 40Hz Gamma brain stimulator

    34 parts4MIT

Questions

How big is the WS2812Controller PCB?

It measures 49.4 × 35.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the WS2812Controller use?

22 parts, built around the ESP-12F, SN74AHCT125N and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WS2812Controller KiCad files?

From the klein0r/pcb-ws2812-wifi-controller repository on GitHub, at the commit this page was made from: the board is WS2812Controller.kicad_pcb and its schematic WS2812Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the WS2812Controller design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).