Sensor

84 boards

KiCad boards from 56 GitHub repositories tagged “sensor”, the most starred first; open any of them in PCBKit.

2 layers142.7 × 194.5 mm
SparkFun STC31 panelized
sparkfun/SparkFun_CO2_Sensor-STC31
A Qwiic breakout for the STC31 CO2 and SHTC3 Temperature and Humidity Sensors.
2,002 parts3
2 layers179.3 × 148 mm
SparkFun Indoor Air Quality Sensor - SCD41 SEN55 panelized
sparkfun/SparkFun_Indoor_Air_Quality_Sensor-SCD41-SEN55
An indoor air quality board combining the SCD41 CO2 sensor and the SEN55 PPM/VOX with humidity and temperature as well.
350 parts3
2 layers65 × 56 mm
Portable bike perception rpi ros2
Anvently/portable-bike-perception-rpi-ros2
Battery-powered bicycle acquisition module using camera, dual 360° Lidar, and GNSS with ROS2 on Raspberry Pi to detect overtaking vehicles and measure curb distance.
22 parts2
2 layers94 × 63.8 mm
TinySensorv1
arcadien/tinySensor
Firmware and generic board for low-power environment sensors
45 parts2MIT
2 layers41 × 20.3 mm
Bme280
fm4dd/pmod-bme280
PMOD module for the Bosch BME280 Temperature Humidity Pressure Sensor, connection over I2C.
14 parts2
4 layers40 × 58 mm
STM32-S Plant
Fred98246/STM32-Environmental-Sensor-and-Datalogging-Board
An open-source STM32F103C8T6 development board designed for environmental monitoring, featuring integrated Li-Ion battery management, USB-C, MicroSD data logging, and onboard I2C sensors for temperature, humidity, and…
59 parts2MIT
2 layers83 × 72 mm
Livello serbatoio definitiva
giorossi91/livello_serbatoio
This project realizes a simple device to monitor the water level in a tank.
44 parts2GPL-3.0
2 layers100 × 50 mm
Dew Controller
kuellenberg/Dew-Controller
Dew heater controller for telescope dew heater straps
92 parts2
2 layers40.1 × 30 mm
LIGHTNING01
mlab-modules/LIGHTNING01
Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.
33 parts2
2 layers116.8 × 168.6 mm
SparkFun AS7343 Qwiic panelized
sparkfun/SparkFun_Spectral_Sensor_Breakout_AS7343_Qwiic
Qwiic Breakout for the 14-channel Multi-Spectral Sensor AS7343 from AMS.
1,519 parts2
2 layers36 × 25 mm
Mgm210l sensor
temonuv/dormouse
🐭 Dormouse — a coin-cell (CR2032) Zigbee 3.0 temperature + humidity sensor on the Silicon Labs MGM210L (EFR32MG21). Firmware + KiCad hardware + Home Assistant integration.
9 parts2MIT
2 layers26.7 × 24.1 mm
GP2Y0D8xxZ0F
bobboteck/GP2Y0D8xxZ0F
A board for SHARP sensor GP2Y0D805Z0F, GP2Y0D810Z0F and GP2Y0D815Z0F
13 parts1MIT
2 layers73.7 × 78.7 mm
Lightning Detector
flooklab/Lightning_Detector
An experimental open hardware project for early notification about approaching thunderstorm activity
51 parts1
2 layers25.4 × 20.3 mm
Sht45-qt
FrancoSpitale/sht45-qt
SHT45 temperature/humidity breakout, Qwiic/STEMMA QT compatible — KiCad 9, open hardware (MIT)
10 parts1MIT
2 layers5.5 × 35 mm
LM75A PROBE PCB
galopago/i2c-temp-probe-pcb
Small circuit board, designed to be installed inside a metal tube or thermowell.
13 parts1MIT
2 layers26.7 × 28.4 mm
ThunderBuddy
gamblor21/ThunderBuddy
Circuit board based on the AS3935 lightning detector chip
17 parts1
4 layers60 × 40 mm
Fast SiPM Photodetector
hannesduske/Fast_SiPM_Photodetector
An open-hardware SiPM photodetector with integrated low-noise amplifier, single-photon resolution, and temperature sensing for active thermal control.
80 parts1CERN-OHL-P-2.0
2 layers92.7 × 38.1 mm
Lazos de Corriente
joseguerra3000/current-loops
Diseno de Modulo de lazos de corriente para monitoreo de sensores tipo ON-OFF a largas distancias.
26 parts1
2 layers80 × 22.9 mm
SwiftSoilMoistureZigbeeSensor
OliverSwift/SwiftZigbeeSoilMoistureSensor
A Zigbee adaptor for Capacitive Soil Moisture Sensor based on nrf52840
12 parts1AGPL-3.0
2 layers14 × 10 mm
TFPROBE01
ThunderFly-aerospace/TFPROBE01
Omnipolar magnetic and reflective optical probe.
8 parts1GPL-3.0
2 layers70.6 × 50.3 mm
TFUNIPAYLOAD01
ThunderFly-aerospace/TFUNIPAYLOAD01
Universal interface for TF-ATMON sensor payload.
81 parts1GPL-3.0
2 layers52 × 67 mm
Tbogg Sensor Pkg PCB
UofC-GNCTR-2024/Tbogg-Sensor-Package-PCB
The sensor package (strain, temperature, vibration) for the 2024 UofC GNCTR tbogg. Designed as an R&D intrastructure monitoring solution.
48 parts1MIT
2 layers27.9 × 15.2 mm
I2C Thermocouple
vintlabs/MCP9600-Module
MCP9600 I²C Module (Hardware)
13 parts1CC-BY-SA-4.0
2 layers16.5 × 20 mm
SHT35 Breakout
aycaozkann/sensirion-sht35-breakout
SHT35 I2C temperature/humidity sensor breakout board — KiCad schematic + PCB, DRC/ERC clean, fab-ready gerbers/BOM/PnP
10 parts