Skip to the content

Radio

53 boards

KiCad boards from 35 GitHub repositories tagged “radio”, the most starred first; open any of them in PCBKit.

  • 2 layers110 × 80 mmNoko 2, the printed circuit board in 3D

    Noko 2

    NikolaiRadke/Noko_2

    The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.

    51 parts3Apache-2.0
  • 4 layers90 × 90 mmSahel pcb, the printed circuit board in 3D

    Sahel pcb

    Aliou8/SAHEL-SPECTRA-RF

    CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.

    172 parts2GPL-3.0
  • 2 layers122.1 × 128.5 mmATS-20, the printed circuit board in 3D

    ATS-20

    Fihdi/ATS-20-Eurorack

    A clone of the ATS 20 from PU2CLR in Eurorack Format (3U height). The circuit contains jumpers to switch between standalone mode and Eurorack.

    81 parts2
  • 2 layers25.5 × 24.6 mmRusb pd second, the printed circuit board in 3D

    Rusb pd second

    ambraglow/rusb-pd

    dc power mod for radios using usb-c connector and usb-pd protocol powering at 12V

    34 parts1GPL-3.0
  • 2 layers42.9 × 15.2 mmLpf, the printed circuit board in 3D

    Lpf

    ferdzo/uprf

    Open Source upconverter

    7 parts1Unlicense
  • 2 layers31.8 × 29.5 mmAX25 TNC modemmodule, the printed circuit board in 3D

    AX25 TNC modemmodule

    motivemachine/APRS_Nanomodem

    My PCB design for an APRS TNC, based on Mark Qvist's excellent MicroModem design. Can be used as a standalone TNC or controlled by several serial protocols. This repo is a mirror for:

    49 parts1MIT
  • 2 layers50 × 75 mmTR Switch, the printed circuit board in 3D

    TR Switch

    wodowiesel/TR-Switch

    The TX/RX-switch is a tool for signal sensitive or PTT switching for HAM radios incl. pcb schematics.

    22 parts1CC0-1.0
  • 4 layers60.6 × 24.1 mmBeDECT, the printed circuit board in 3D

    BeDECT

    ambraglow/BeDECT

    41 partsGPL-3.0
  • 2 layers43.7 × 15.7 mm01 UKW Filter, the printed circuit board in 3D

    01 UKW Filter

    arnobert/ukw_bandstop

    Bandstop filter on a small PCB to eliminate strong VHF FM radio (87.5 - 108 MHz) broadcast signals.

    12 partsGPL-3.0
  • 2 layers40.1 × 40.1 mmRFSWITCH01, the printed circuit board in 3D

    RFSWITCH01

    mlab-modules/RFSWITCH01

    The module featuring two RF switches. Designed for radio transceivers with separate input and output.

    45 partsGPL-3.0
  • 2 layers250 × 210 mmCarrier rev a, the printed circuit board in 3D

    Carrier rev a

    the-Drunken-coder/dual-band-radio-lab

    100 × 75 mm, two copper layers, 1.6 mm PCB. One design supports two identical test nodes. Each carrier takes one USB-C controller and two interchangeable LR2021 radio modules.

    107 parts
  • 2 layersHuzzah cc112x shield, the printed circuit board in 3D

    Huzzah cc112x shield

    rfquack/RFQuack

    RFQuack: the versatile RF-analysis tool that quacks!

    6 parts348GPL-2.0
  • 2 layers45 × 85 mmHbr mk2-af, the printed circuit board in 3D

    Hbr mk2-af

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    96 parts76MIT
  • 2 layers68.8 × 30 mmHbr mk2-bfo, the printed circuit board in 3D

    Hbr mk2-bfo

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    40 parts76MIT
  • 2 layers79 × 85 mmHbr mk2-bpfs, the printed circuit board in 3D

    Hbr mk2-bpfs

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    119 parts76MIT
  • 2 layers59 × 93 mmHbr mk2-digital, the printed circuit board in 3D

    Hbr mk2-digital

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    97 parts76MIT
  • 2 layers84 × 69 mmHbr mk2-lpfs, the printed circuit board in 3D

    Hbr mk2-lpfs

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    120 parts76MIT
  • 2 layers63.5 × 63.5 mmHbr mk2-pa, the printed circuit board in 3D

    Hbr mk2-pa

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    64 parts76MIT
  • 2 layers45.5 × 30.5 mmHbr mk2-power, the printed circuit board in 3D

    Hbr mk2-power

    afiskon/hbr-mk2

    All HF bands QRP CW/SSB transceiver

    42 parts76MIT
  • 2 layers70 × 34.8 mmIf amp-455, the printed circuit board in 3D

    If amp-455

    dilshan/arduino-superhet

    Si5351 and Arduino based superheterodyne receiver

    22 parts39MIT
  • 2 layers65 × 56 mmRaspberry pi adapter, the printed circuit board in 3D

    Raspberry pi adapter

    NightLaneOrg/nr-si468x-dev

    Si468x-based DAB/FM receiver module (M.2 E-Key) with open hardware and Linux integration.

    17 parts4GPL-3.0
  • 4 layers90 × 90 mmFlightComputer, the printed circuit board in 3D

    FlightComputer

    jbrown3859/EE175-SeniorDesign

    CubeSat Flight Computer and Radio - EE175 Senior Design F22

    83 parts3
  • 2 layers90 × 90 mmSahel battery, the printed circuit board in 3D

    Sahel battery

    Aliou8/SAHEL-SPECTRA-RF

    CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.

    41 parts2GPL-3.0
  • 2 layers90 × 90 mmSahel solar, the printed circuit board in 3D

    Sahel solar

    Aliou8/SAHEL-SPECTRA-RF

    CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.

    59 parts2GPL-3.0