
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Bandstop filter on a small PCB to eliminate strong VHF FM radio (87.5 - 108 MHz) broadcast signals.
01 UKW Filter is an open-source printed circuit board by arnobert, from the arnobert/ukw_bandstop repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43.7 × 15.7 mm with 12 parts on 7 nets, routed with 35 tracks and 71 vias.
Its parts include 5 capacitors, 5 inductors and 2 connectors. It belongs with the radio and wireless boards of this library.
FM radio broadcast signals are usually really strong compared to e.g. ham radio short wave signals. The FM signals can cause massive intermodulation in SDRs, LimeSDR in my case. So I designed a small prototype of a filter for these frequencies.
I used the free version of Ansoft Designer for the calculation of the filter. Parameters were:
After calculation I had to tune/round the values of Cs and Ls to existing components.
The input and output are SMA connectors. All other components are 0603 SMD.
The first prototype was ordered at dirtypcbs.
I soldered one board and measured with my Siglent SSA 3021X spectrum analyzer, see screenshot. You can see the corner frequencies at 73 and 140 MHz.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 140nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2, L4 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4 |
| 2 | 39pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5 |
| 2 | 68nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L3, L5 |
| 2 | Conn_Coaxial | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1, J2 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 82pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 43.7 × 15.7 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the arnobert/ukw_bandstop repository on GitHub, at the commit this page was made from: the board is kicad/01_UKW_Filter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).