2 layers
2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_23The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
- Size
- 110 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 93
- Pads
- 219
- Tracks, vias
- 468, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Apr 2018
- Updated
- 12 Apr 2026
Overview
Noko 2 is an open-source printed circuit board by NikolaiRadke, from the NikolaiRadke/Noko_2 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 110 × 80 mm with 51 parts on 93 nets, routed with 468 tracks and 3 vias.
It is built around the MT3608, 24LC256-I/P and TDA7053A, with the TP4056, DS3231S# and HC-SR04 among its other parts. Its parts include 15 capacitors, 10 resistors, 10 connectors, 7 ICs and 1 diode. It belongs with the radio and wireless boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
7
MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
24LC256-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
TDA7053A
SO16_W7.5SO16_W7.5 New Arrivals ROHSPhilips SemiconsUncategorised
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
DS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)Uncategorised
HC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, Transmitters
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
README
schematics/kicad/README.mdAchtung! Bitte die Gerber Dateien noch nicht benutzen! Es müssen noch Fehler beseitigt werden.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C7, C8, C12, C14, C15 |
| 3 | 100uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C6, C10, C13 |
| 3 | 2,2k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 0,47uF | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C4, C5 |
| 2 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R9 |
| 2 | 1uF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1, C11 |
| 2 | 220uF | Capacitors_THT:CP_Radial_D8.0mm_P3.80mm | C2, C3 |
| 1 | 0,1u | Capacitors_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C9 |
| 1 | 100k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 2,7k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 24LC256 | Housings_DIP:DIP-8_W7.62mm | U6 |
| 1 | 300 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | AUX | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P9 |
| 1 | Akku | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P1 |
| 1 | Arduino_Nano | NOKO_2:Arduino_Nano | U5 |
| 1 | Bauch | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P6 |
| 1 | D | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | D1 |
| 1 | D | Diodes_THT:D_DO-41_SOD81_P7.62mm_Horizontal | 1N1 |
| 1 | DS3231 | NOKO_2:DS3231 | M3 |
| 1 | Display | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | P8 |
| 1 | FRT5 | NOKO_Wetimer:Printrelais_ST03 | U7 |
| 1 | HC-SR04 | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | P7 |
| 1 | IRF540N | Power_Integrations:TO-220 | Q1 |
| 1 | JQ6500-28P | NOKO_2:JQ6500-28P | M2 |
| 1 | LOGO | NOKO_2:NOKO_Logo | G*** |
| 1 | Links | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P4 |
| 1 | MT3608 | NOKO_Wetimer:MT3608 | U1 |
| 1 | Micro_USB_Hub | NOKO_2:Micro-USB-Hub | M1 |
| 1 | Nase | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P3 |
| 1 | Poti | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | J1 |
| 1 | Rechts | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P5 |
| 1 | Si4703 | NOKO_2:Si4703 | U4 |
| 1 | Spkr Links | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | Links1 |
| 1 | Spkr Rechts | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | Rechts1 |
| 1 | TDA7053a | NOKO_Wetimer:TDA7053a | U3 |
| 1 | TP4056 | NOKO_Wetimer:TP4056 | U2 |
| 1 | USB | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | P2 |
Similar boards
- 2 layers74.1 × 66.5 mm
SHVC SOUND ESP32
SHIMA-R7/SHVC-SOUND-Player
Arduino Uno R3 / Nano (ATmega328P・5Vロジック) で SHVC-SOUND(スーファミ音源モジュール: S-SMP + S-DSP + ARAM + DAC)を駆動し、 .spc ファイルを実チップで再生するプロジェクト。音声は TDA7053A(ステレオBTL)で増幅し3.5mmジャックへ出力する。
33 parts - 2 layers177.8 × 76.2 mm
- 2 layers155 × 70.1 mm
4S BMS Arduino Shield autor
Aassimrepo/4S-BMS-Proteus-KiCad
Simulation and PCB design of a 4S Battery Management System using Proteus, Arduino and KiCad.
69 parts - 2 layers65 × 64 mm
- 2 layers42.3 × 43.9 mm
IoT Weather Station Circuit
Ezerwald/stm32-kicad-weather-station
KiCad-based PCB project for an STM32-powered IoT weather station with environmental sensing, real-time clock support, battery charging, and e-paper display connectivity.
46 partsMIT - 4 layers56 × 54 mm
Autofeeder
wabolabs/autofeedermod
ESP32-C6 based chicken feed dispenser controller with Matter, CAN bus, and 18650 battery
44 partsCERN-OHL-W-2.0 - 2 layers52 × 29 mm
Controller
DaringCuteSeal/spinetime
A neurodivergent-friendly linear clock gadget for time management in binder journals.
42 parts3
Questions
How big is the Noko 2 PCB?
It measures 110 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Noko 2 use?
51 parts, built around the MT3608, 24LC256-I/P, TDA7053A and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Noko 2 KiCad files?
From the NikolaiRadke/Noko_2 repository on GitHub, at the commit this page was made from: the board is schematics/kicad/NOKO_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Noko 2 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).