2 layers65 × 64 mm
2 layers65 × 64 mm
Pms5003
ayoy/kicad-projects2- Size
- 65 × 64 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 31
- Pads
- 140
- Tracks, vias
- 239, 31
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Jan 2018
- Updated
- 17 Oct 2018
Overview
Pms5003 is an open-source printed circuit board by ayoy, from the ayoy/kicad-projects repository on GitHub. It is a 2-layer board of 65 × 64 mm with 34 parts on 31 nets, routed with 239 tracks and 31 vias.
It is built around the PMS5003, SHT10 and MAX1811ESA+, with the TC1262-3.3VDB, W01 and DS3231S# among its other parts. Its parts include 7 capacitors, 7 resistors, 7 connectors, 4 ICs and 3 diodes.
Main components
7PMS5003
--10℃~+60℃ 100mA 4.5V~5.5V 50mm Digital general particulate matter concentration sensor Low power mode Serial port - Sensor Modules ROHSBeijing PlantowerSensor Modules
SHT10
SMD-40℃~+123.8℃ 0%RH~100%RH 12bit 2.4V~5.5V 4.5%RH 550uA Factory calibration、Built-in heater、Derived quantity calculation、Temperature compensation I2C ±0.5℃ SMD Temperature and Humidity Sensor ROHSSensirionUncategorised
MAX1811ESA+
SOIC-8-40℃~+85℃ 1 2.5uA 4.2V 4.35V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、涓流充电、可编程充电电流、软启动、欠压锁定 SOIC-8 Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management
TC1262-3.3VDB
SOT-223-3-40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
W01
DIP-4-55℃~+125℃@(Tj) 1.5A 100V 10uA@100V 1V@1.5A 40A Single-Phase Rectifier DIP-4 Bridge Rectifiers ROHSMDDBridge Rectifiers
DS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)Uncategorised
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistors_SMD:R_1206 | R1, R6 |
| 2 | 100k | Resistors_SMD:R_1206 | R3, R4 |
| 1 | 100n | Capacitors_SMD:C_1206 | C5 |
| 1 | 100u | Capacitors_SMD:CP_Elec_6.3x7.7 | C4 |
| 1 | 10k | Resistors_SMD:R_1206 | R7 |
| 1 | 10uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C2 |
| 1 | 1nF | Capacitors_SMD:C_0805 | C7 |
| 1 | 1u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C3 |
| 1 | 22pF | Capacitors_SMD:C_0805 | C6 |
| 1 | 4.7uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C1 |
| 1 | 470 | Resistors_SMD:R_1206 | R2 |
| 1 | 47k | Resistors_SMD:R_1206 | R5 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | Battery | Connectors_JST:JST_PH_S2B-PH-SM4-TB_02x2.00mm_Angled | J1 |
| 1 | D | Diodes_SMD:D_SMA | D1 |
| 1 | DS3231 | various:DS3231 | J2 |
| 1 | D_Schottky | Diodes_SMD:D_SMA | D3 |
| 1 | IRF540N | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | IRF7309IPBF | Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mm | Q2 |
| 1 | LED | LEDs:LED_1206 | D2 |
| 1 | LOGO | various:pollution | G*** |
| 1 | MAX1811 | Power_Integrations:SO-8 | U2 |
| 1 | P2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5 |
| 1 | PMS5003 | Socket_Strips:Socket_Strip_Straight_1x06_Pitch2.54mm | J3 |
| 1 | PROG | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | SHT10 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J4 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_EVQPE1 | SW1 |
| 1 | TC1262-33 | TO_SOT_Packages_SMD:TO-263-3_TabPin2 | U3 |
| 1 | U3V12F5 | Pololu:U3V12F9 | U1 |
| 1 | USB_OTG | various:USB_Micro-B_91-US01-517 | J7 |
| 1 | W01 | Pycom:W01 | U11 |
The 33 most common of 34 parts.
More from ayoy/kicad-projects
9- 2 layers73 × 75 mm
- 2 layers34 × 33 mm
- 2 layers34 × 36 mm
- 2 layers52 × 42.5 mm
- 2 layers65 × 30 mm
- 2 layers40 × 40 mm
- 2 layers36 × 20 mm
- 2 layers35 × 20 mm
Similar boards
- 2 layers20 × 30 mm
- 2 layers110 × 80 mm
Noko 2
NikolaiRadke/Noko_2
The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.
51 parts3Apache-2.0 - 4 layers40 × 100 mm
- 2 layers60.6 × 59.8 mm
Xx montre connectee pse xX
boumierjaptiste/2025_PSE_B6_gsailly_bjoumier
Projet de montre connectée IOT3-S6 en binôme
46 parts - 4 layers20.3 × 47.5 mm
Rocket ejection
jonnydyer/rocket_ejection
Telemetry recorder and ejection driver for model rockets
52 parts - 2 layers
- 2 layers88.3 × 129 mm
- 2 layers95.1 × 85.4 mm
Main cart
yinipi/HaptiPointer-Studio
Dual-board KiCad hardware, ATmega32U4 bare-metal C firmware (USB CDC), and Python GUI to configure presentation timers directly into EEPROM
77 parts
Questions
How big is the Pms5003 PCB?
It measures 65 × 64 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pms5003 use?
34 parts, built around the PMS5003, SHT10, MAX1811ESA+ and TC1262-3.3VDB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pms5003 KiCad files?
From the ayoy/kicad-projects repository on GitHub, at the commit this page was made from: the board is pms5003-w01/pms5003.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pms5003 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ayoy before reusing the design.