2 layers223.8 × 137.7 mm
2 layers88.3 × 129 mm
Il flatto
Scaniox/il-flatto- Size
- 88.3 × 129 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 203
- Nets
- 138
- Pads
- 843
- Tracks, vias
- 1,523, 0
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Dec 2022
- Updated
- 30 Jan 2024
Overview
Il flatto is an open-source printed circuit board by Scaniox, from the Scaniox/il-flatto repository on GitHub. It is a 2-layer board of 88.3 × 129 mm with 203 parts on 138 nets, routed with 1,523 tracks and 0 vias.
It is built around the ATMEGA1284P-MU, ATMEGA1284P-PU and MAX1811ESA+, with the IN-PI15TAT5R5G5B among its other parts. Its parts include 69 diodes, 44 capacitors, 39 resistors, 8 switches and 5 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA1284P-MU
VQFN-44-EP(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ATMEGA1284P-PU
PDIP-40-40℃~+85℃ 1.8V~5.5V 10bit 128KB 16KB 20MHz 32 4KB 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MAX1811ESA+
SOIC-8-40℃~+85℃ 1 2.5uA 4.2V 4.35V~6.5V 500mA Charging IC Lithium Battery Not supported 恒流充电、涓流充电、可编程充电电流、软启动、欠压锁定 SOIC-8 Battery Management ROHSMaxim Integrated (Analog Devices)Battery Management
IN-PI15TAT5R5G5B
SMD-4_1.5X1.5SMD-4_1.5X1.5 RGB LEDs(Built-in IC) ROHSInoluxUncategorised
Parts
203| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | IN-PI15TAT5R5G5B | footprints:INPI15TAT5R5G5B | D200, D201, D202, D203, D204, D205, D206, D207, D208, D209, D210, D211, D212, D213, D214, D215 +48 |
| 16 | 68 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R1, R2, R2, R6, R6, R7, R7, R8, R8, R9, R9, R10, R10, R11, R11 |
| 8 | 10u | Capacitor_SMD:C_0603_1608Metric | C300, C301, C302, C303, C304, C305, C306, C307 |
| 8 | 68 | Resistor_SMD:R_0402_1005Metric | R101, R102, R106, R107, R108, R109, R110, R111 |
| 8 | Conn_02x05_Odd_Even | footprints:PinSocket_2x05_P2.54mm zero footprint mirror | SV1(A)1, SV1(A)1, SV2(B)1, SV2(B)1, SV3(C)1, SV3(C)1, SV4(D)1, SV4(D)1 |
| 7 | 100nf | Capacitor_SMD:C_0402_1005Metric | C103, C111, C112, C113, C114, C205, C206 |
| 7 | 10uf | Capacitor_SMD:C_0402_1005Metric | C104, C105, C106, C107, C108, C109, C110 |
| 6 | , , , , , | ||
| 4 | 100nf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C13, C14 |
| 4 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C4, C5, C5 |
| 4 | 10uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C8, C9, C10 |
| 4 | 22pf | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C1, C2, C2 |
| 3 | VAL** | footprints:mouse-bite-3mm-slot | mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot |
| 2 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R3 |
| 2 | 100nf | Capacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mm | C3, C3 |
| 2 | 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6, C6 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R5 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R105, R204 |
| 2 | 12MHz | Crystal:Crystal_HC49-4H_Vertical | Q1, Q1 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R4 |
| 2 | 22pf | Capacitor_SMD:C_0402_1005Metric | C101, C102 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R201, R202 |
| 2 | ATmega1284P-P | Package_DIP:DIP-40_W15.24mm | , IC1 |
| 2 | BAT | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | X3, X103 |
| 2 | Conn_01x03 | footprints:PinHeader_1x03_P2.54mm zero footprint | JP3, JP103 |
| 2 | ISP | footprints:PinSocket_2x03_P2.54mm zero footprint mirror | J3, J103 |
| 2 | JTAG | footprints:PinSocket_2x05_P2.54mm zero footprint mirror | J5, J105 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D1 |
| 2 | S1 | footprints:EG1218 | S1, S1 |
| 2 | SD_Card | footprints:sd card | X2, X102 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | S2, S2 |
| 1 | 0 | footprints:CAS-D20TB | S3 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R103 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Q101 |
| 1 | 2.5k | Resistor_SMD:R_0402_1005Metric | R203 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R104 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R112 |
| 1 | ATmega1284P-M | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U101 |
| 1 | CHRG | LED_SMD:LED_0603_1608Metric | D102 |
| 1 | CHRG | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D101 |
| 1 | LOGO | footprints:micros | G*** |
| 1 | LOGO | footprints:pins | G*** |
| 1 | LOGO | footprints:text | G*** |
| 1 | MAX1811 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC3 |
| 1 | MCP1825S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | IC2 |
| 1 | MCP73831-2-MC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U103 |
| 1 | NCV8605MN33T2G | footprints:NCV8605MN33T2G | U102 |
| 1 | PWR SEL | footprints:CS-4-12XA | S101 |
| 1 | SW_DPST_x2 | footprints:CVS-02TB mirrored | S103 |
| 1 | SW_SPST | footprints:SW_TL3780AF240QG | S102 |
| 1 | USB_C_Receptacle_USB2.0 | footprints:GCT_USB4110-GF-A_REVB | X101 |
The 201 most common of 203 parts.
More from Scaniox/il-flatto
1Similar boards
- 2 layers85.3 × 35.3 mm
- 2 layers18.5 × 33.3 mm
Arduino Pro Mini XL
michpro/Arduino_Pro_Mini_XL
ATmega1284P uC module in Arduino Pro Mini format
21 partsCERN-OHL-P-2.0 - 2 layers61 × 20.5 mm
SirMighty
vul-os/sirboard
Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.
50 parts56Apache-2.0 - 4 layers30 × 181.5 mm
Vm010-channelcontrol
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
64 parts21 - 2 layers55.9 × 40 mm
DepthSensorBoard
palouse-robosub/pcbs-2018
This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.
34 parts - 4 layers40 × 100 mm
- 2 layers65 × 64 mm
- 2 layers60.6 × 59.8 mm
Xx montre connectee pse xX
boumierjaptiste/2025_PSE_B6_gsailly_bjoumier
Projet de montre connectée IOT3-S6 en binôme
46 parts
Questions
How big is the Il flatto PCB?
It measures 88.3 × 129 mm and has 2 copper layers, 0.6 mm thick.
What parts does the Il flatto use?
203 parts, built around the ATMEGA1284P-MU, ATMEGA1284P-PU, MAX1811ESA+ and IN-PI15TAT5R5G5B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Il flatto KiCad files?
From the Scaniox/il-flatto repository on GitHub, at the commit this page was made from: the board is pcb/il-flatto/il-flatto.kicad_pcb and its schematic pcb/il-flatto/LED_ROW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Il flatto design in my own project?
Its repository states no licence, so its author keeps all rights: ask Scaniox before reusing the design.