Skip to the content
2 layers85.3 × 35.3 mmGlyph, the printed circuit board in 3D

Glyph

MalphasWats/Glyph4

Handheld gaming device based on ATMega1284P

Full screenGitHub.kicad_pcb
Size
85.3 × 35.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
50
Nets
41
Pads
190
Tracks, vias
368, 22
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Feb 2019
Updated
23 Nov 2019

Overview

Glyph is an open-source printed circuit board by MalphasWats, from the MalphasWats/Glyph repository on GitHub. It is a 2-layer board of 85.3 × 35.3 mm with 50 parts on 41 nets, routed with 368 tracks and 22 vias.

It is built around the ATMEGA1284P-MU. Its parts include 15 capacitors, 10 switches, 8 resistors, 7 connectors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Glyph

Glyph

Glyph is a handheld gaming device based on the ATMega1284P micro controller.

This repository contains the mechanical components - KiCAD PCB & laser cut case.

Specification

  • ATMega1284P @ 16MHz. 128kB Flash, 16kB SRAM
  • 1.3" monochrome OLED display
  • 8 soft buttons
  • 2 channel sound via piezo speaker
  • 2 programmable red LEDs

PCB

KiCAD symbol/footprint library

Code

A software library for controlling the hardware and building simple games is available here:

glyphlib

Games

Parts

50
QtyValueFootprintReferences
51uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C10, C11
3LEDResistor_SMD:R_0805_2012MetricR1, R6, R7
20.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1, C15
20.1uFCapacitor_SMD:C_0805_2012MetricC7, C12
210MResistor_SMD:R_0805_2012MetricR3, R4
222pFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC13, C14
24.7uFCapacitor_SMD:C_0805_2012MetricC5, C6
1LOGOLOGO
11.3-OLEDCustom Footprints:1.3-OLED-bare-noslotU1
11KResistor_SMD:R_0805_2012MetricR0
120MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mmY1
122uFCapacitor_SMD:C_0805_2012MetricC9
1290kResistor_SMD:R_0805_2012MetricR5
12KResistor_SMD:R_0805_2012MetricR2
147uFCapacitor_SMD:C_0805_2012MetricC8
1ATmega1284P-MUPackage_QFP:TQFP-44_10x10mm_P0.8mmU0
1BTN_ACustom Footprints:SW_SOFT_SMD_6mmSW5
1BTN_BCustom Footprints:SW_SOFT_SMD_6mmSW6
1BTN_CCustom Footprints:SW_SOFT_SMD_6mmSW7
1BTN_DCustom Footprints:SW_SOFT_SMD_6mmSW8
1Battery PadsCustom Footprints:150mAh-LipoJ0
1CHGLED_SMD:LED_0805_2012MetricD0
1CHG CTRLTO_SOT_Packages_SMD:SOT-23-5_HandSolderingU2
1DOWNCustom Footprints:SW_SOFT_SMD_6mmSW2
1ISPCustom Footprints:ISP_SMDJ1
1LEFTCustom Footprints:SW_SOFT_SMD_6mmSW3
1POWERCustom Footprints:ALPS-SSSS811101_SPDTSW9
1RESETCustom Footprints:SW_SOFT_SMD_6mmSW0
1RIGHTCustom Footprints:SW_SOFT_SMD_6mmSW4
1RegTO_SOT_Packages_SMD:SOT-23_HandsolderingU3
1Screw Point 1Custom Footprints:M2_SCREW_HOLEJ3
1Screw Point 2Custom Footprints:M2_SCREW_HOLEJ4
1Screw Point 3Custom Footprints:M2_SCREW_HOLEJ5
1Screw Point 4Custom Footprints:M2_SCREW_HOLEJ6
1SpeakerCustom Footprints:Generic_SpeakerLS1
1UPCustom Footprints:SW_SOFT_SMD_6mmSW1
1USB-MicroConnectors_USB:USB_Micro-B_Molex-105017-0001J2
1USR_1LED_SMD:LED_0805_2012MetricD1
1USR_2LED_SMD:LED_0805_2012MetricD2

More from MalphasWats/Glyph

1
  • 2 layers41 × 16 mmGlyph isp, the printed circuit board in 3D

    Glyph isp

    MalphasWats/Glyph

    Handheld gaming device based on ATMega1284P

    18 parts4

Similar boards

  • 2 layers18.5 × 33.3 mmArduino Pro Mini XL, the printed circuit board in 3D

    Arduino Pro Mini XL

    michpro/Arduino_Pro_Mini_XL

    ATmega1284P uC module in Arduino Pro Mini format

    21 partsCERN-OHL-P-2.0
  • 2 layers88.3 × 129 mmIl flatto, the printed circuit board in 3D

    Il flatto

    Scaniox/il-flatto

    203 parts
  • 2 layers61 × 20.5 mmSirMighty, the printed circuit board in 3D

    SirMighty

    vul-os/sirboard

    Open hardware: 107 KiCad PCB designs — SMD-to-THT breakout adapters, ATTiny/ATMega/ESP development boards, and a 39-part sensor line on a common JST-SH connector.

    50 parts56Apache-2.0
  • 4 layers30 × 181.5 mmVm010-channelcontrol, the printed circuit board in 3D

    Vm010-channelcontrol

    mirdej/vmix

    Multichannel modular analog PAL video mixer based on the SYNKIE project

    64 parts21
  • 2 layers55.9 × 40 mmDepthSensorBoard, the printed circuit board in 3D

    DepthSensorBoard

    palouse-robosub/pcbs-2018

    This repository contains all of the custom PCB designs for the Palouse Robosub Electrical Engineering Team.

    34 parts
  • 2 layers187.2 × 26.6 mmBlade12, the printed circuit board in 3D

    Blade12

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    50 parts3.7k
  • 2 layers45.7 × 25.9 mmAccessory, the printed circuit board in 3D

    Accessory

    usbarmory/usbarmory

    USB armory - The open source compact secure computer

    50 parts1.5k
  • 2 layers21 × 31.5 mmK1-aioc, the printed circuit board in 3D

    K1-aioc

    skuep/AIOC

    Ham Radio All-in-one-Cable

    50 parts1.4kMIT

Questions

How big is the Glyph PCB?

It measures 85.3 × 35.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Glyph use?

50 parts, built around the ATMEGA1284P-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Glyph KiCad files?

From the MalphasWats/Glyph repository on GitHub, at the commit this page was made from: the board is Glyph.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Glyph design in my own project?

Its repository states no licence, so its author keeps all rights: ask MalphasWats before reusing the design.