Skip to the content
1234

TC1262-3.3VDB

Microchip TechnologyExtended

-40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
microchip/TC1262-3.3VDB
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-3
Pins
4
In stock
632 at JLCPCB (C638655)
Used on
25 open-source boards

Overview

The TC1262-3.3VDB is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Microchip Technology in a SOT-223-3 package with 4 pins. -40℃~+125℃ 1 130uA 3.3V 500mA 64dB@(1kHz) 650mV@(500mA) 6V Fixed Over Current Protection、Over Temperature Protection Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND, from PCBKit's generic symbols) and its footprint (EasyEDA_Cloud:SOT-223-3_L6.5-W3.5-P3.05-LS7.0, from EasyEDA), ready for a KiCad board. 632 are in stock at JLCPCB (part C638655). 25 open-source boards in 23 repositories on GitHub use it.

Symbol

1IN3OUT2GND
Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GNDFrom PCBKit's generic symbols

Footprint

1234
EasyEDA_Cloud:SOT-223-3_L6.5-W3.5-P3.05-LS7.0From EasyEDA

From the datasheet

17
Supply, least
2.7 V · VIN, minimum operating; also requires VIN ≥ VR + VDROPOUT · p. 2
Supply, most
6 V · VIN, maximum operating · p. 2
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 2
Junction, hottest
125 °C · Maximum operating junction temperature · p. 2
Takes working
80 µA · VIN, typical supply current, IL = 0 · p. 2
Gives
500 mA · Rated maximum output current · p. 2
Current limit
1.2 A · Typical output short circuit current, VOUT = 0V · p. 2
Output
3.3 V · Fixed nominal output for TC1262-3.3VDB · p. 1
Dropout
20 mV · Typical dropout at IL = 100 uA · p. 2
Dropout
60 mV · Typical dropout at IL = 100 mA · p. 2
Dropout
200 mV · Typical dropout at IL = 300 mA · p. 2
Dropout
350 mV · Typical dropout at IL = 500 mA · p. 2
Junction to air (SOT-223)
45 K/W · 2500 sq mm topside copper, backside copper and board; tab attached to topside copper · p. 4
Junction to air (SOT-223)
53 K/W · 225 sq mm topside copper; 2500 sq mm backside copper and board; tab attached · p. 4
Junction to air (SOT-223)
59 K/W · 100 sq mm topside copper; 2500 sq mm backside copper and board; tab attached · p. 4
Junction to air (SOT-223)
52 K/W · 1000 sq mm topside copper, backside copper and board; tab attached · p. 4
Junction to air (SOT-223)
55 K/W · 1000 sq mm topside copper and board; no backside copper; tab attached · p. 4

What it is and has

3
Output current
500mA · p. 1
Protection
Over current and over temperature · p. 1
Package
3-Pin SOT-223 · p. 1

Around it

2
cap 1F (min)
between VOUT and GND; Required; ESR greater than 0.1Ω and less than 5Ω, resonant frequency above 1MHz. Aluminum electrolytic or tantalum; solid tantalum recommended below -25°C. · p. 3
cap 1F
between VIN and GND; Connect if more than 10 inches of wire separates the regulator and AC filter capacitor, or if powered by a battery. Aluminum electrolytic or tantalum. · p. 3

Specifications

24
ParameterConditionsAs printedPage
Input Voltagemax 6.5 V2
Maximum Voltage on Any PinVIN +0.3V to -0.3Vmin -0.3 V2
Operating Temperature Range TJJunction temperature; -40°C < TJ < 125°Cmin -40 · max 125 °C2
Storage Temperaturemin -65 · max 150 °C2
Input Operating Voltage VINNote 7: VIN ≥ VR + VDROPOUT and VIN ≥ 2.7V for IL = 0.1mA to IOUTMAXmin 2.7 · max 6 V2
Maximum Output Current IOUTMAXmin 500 mA2
VOUT Temperature Coefficient VOUT/TNote 2typ 40 ppm/°C2
Line Regulation VOUT/VIN(VR + 1V) ≤ VIN ≤ 6Vtyp 0.003 · max 0.35 %/V2
Load Regulation VOUT/VOUTIL = 0.1mA to IOUTMAX (Note 3)typ 0.002 · max 0.01 %/mA2
Dropout Voltage VIN-VOUTIL = 100Atyp 20 · max 30 mV2
Dropout Voltage VIN-VOUTIL = 100mAtyp 60 · max 130 mV2
Dropout Voltage VIN-VOUTIL = 300mAtyp 200 · max 390 mV2
Dropout Voltage VIN-VOUTIL = 500mA (Note 4)typ 350 · max 650 mV2
Supply Current IDDIL = 0typ 80 · max 130 A2
Power Supply Rejection Ratio PSRRFRE ≤ 1kHztyp 64 dB2
Output Short Circuit Current IOUTSCVOUT = 0Vtyp 1200 mA2
Thermal Regulation VOUT/PDNote 5typ 0.04 V/W2
Output Noise eNIL = IOUTMAX, FRE = 10kHztyp 260 nV/Hz2
Thermal Resistance JASOT-223; topside copper 2500 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 45 °C/W4
Thermal Resistance JASOT-223; topside copper 1000 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 45 °C/W4
Thermal Resistance JASOT-223; topside copper 225 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 53 °C/W4
Thermal Resistance JASOT-223; topside copper 100 sq mm, backside copper 2500 sq mm, board 2500 sq mm; tab attached to topside coppertyp 59 °C/W4
Thermal Resistance JASOT-223; topside copper 1000 sq mm, backside copper 1000 sq mm, board 1000 sq mm; tab attached to topside coppertyp 52 °C/W4
Thermal Resistance JASOT-223; topside copper 1000 sq mm, backside copper 0 sq mm, board 1000 sq mm; tab attached to topside coppertyp 55 °C/W4

Pins, by the datasheet

3
1 VIN
Unregulated supply input. · p. 3
2 GND
Ground terminal. · p. 3
3 VOUT
Regulated voltage output. · p. 3

Ordering codes, by the datasheet

3
TC1262-xxVDB
3-Pin SOT-223 · SOT-223 package; -40°C to +125°C junction temperature range; xx indicates output voltage, 3.3 for the requested part · p. 1
TC1262-xxVAB
3-Pin TO-220 · TO-220 package; -40°C to +125°C junction temperature range; xx indicates output voltage · p. 1
TC1262-xxVEB
3-Pin DDPAK · DDPAK package; -40°C to +125°C junction temperature range; xx indicates output voltage · p. 1

Open-source boards using it

25See all 25
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69
  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69
  • 2 layers53.3 × 47.2 mmRAMPS WiFi Adapter, the printed circuit board in 3D

    RAMPS WiFi Adapter

    ODDepot/RAMPS-WiFi-Adapter

    The RAMPS WiFi Adapter provides wireless networking for RepRap's RAMPS (Arduino Mega Pololu Shield) controller.

    21 parts10
  • 4 layers19.3 × 52.3 mmStm32-dev board, the printed circuit board in 3D

    Stm32-dev board

    ShaneTWilliams/stm32-dev-board

    A small-footprint, custom development PCB for the STM32 platform

    30 parts4GPL-3.0
  • 2 layers65 × 64 mmPms5003, the printed circuit board in 3D

    Pms5003

    ayoy/kicad-projects

    34 parts2
  • 2 layers48.7 × 22.5 mmAirsticks pcb, the printed circuit board in 3D

    Airsticks pcb

    lizboyer/Airsticks

    Airsticks was a project by myself (Elizabeth Boyer), Christian Tchilikov, and Dearborn Plys. It uses accelerometers, a speaker, an STM32 MCU, and a board we created.

    69 parts1
  • 2 layers89.5 × 53 mmFinal project v0.1, the printed circuit board in 3D

    Final project v0.1

    ryfu2/Fall2024ECE445Team33

    Augmented Modular AI Dialogue and Exchange User System

    42 parts1
  • 2 layers130 × 110 mmCustom MacroPad Pro, the printed circuit board in 3D

    Custom MacroPad Pro

    BobDaBanana27/supreme-PCB

    For Hack Club Half Life

    15 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TC1262-3.3VDB?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3OUT_4GND and the footprint EasyEDA_Cloud:SOT-223-3_L6.5-W3.5-P3.05-LS7.0, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TC1262-3.3VDB?

SOT-223-3, with 4 pins. Its footprint is drawn on this page.

Where is the TC1262-3.3VDB datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the TC1262-3.3VDB?

JLCPCB lists it as part C638655, with 632 in stock; the sellers' links on this page open their listings.

What can replace the TC1262-3.3VDB?

Parts like it in the library: the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW, the ME6211C33M5G-N by MICRONE and the SPX3819M5-L-3-3/TR by MaxLinear. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TC1262-3.3VDB?

25 boards in 23 repositories on GitHub; the most starred are listed on this page, with their KiCad files.