KiCad boards from 1,297 GitHub repositories tagged “pcb”, the most starred first; open any of them in PCBKit.
GerardoNevarez/SharpDisplayPcb
Sharp Memory Display PCB - alternative design for 3.3v only.. Based on mechanical layout from the Adafruit 3502 module ( https://github.com/adafruit/Adafruit-Sharp-Memory-Display-PCBs ).
HarkonenBade/batt
A 1S lipo charge/protect board based on the TP4056 and the FS312F
hkzlab/OtterX_Ram_Expansion
RAM Expansion for the OtterX (CommanderX16 compatible) computer
jemmec/legshark
An open source 60% (15 by 5) ortholinear keyboard designed with both flexability and familiarity in mind.
karmakrafts/EtherKraken
A RP3A0 SiP based controller with 34 programmable IOs, Cortex M0 co-processor, 2MB of flash, SPI, I²C, UART and 100Base-T connectivity.
kellerkindt/bluepill_sensor
Bluepill stm31f103 ethernet sensor extension board with SW written in Rust
LouWii/louwii-pad
Macro pad with 6 encoders, 8 switches, and an OLED screen
Matyas604/Matyas-s-Hackpad
My first own project, which includes a PCB and 3D printed components that I made.
mec-kon/weather_station
A simple weather station hardware (pcb files) for recording temperature, humidity, pressure and airquality.
mengstr/PCIeTestPCB
A test PCB having a dual PCIe-36 connector and card edge connectors.
MichMich/555MonoStableRelay
A 555 timer controlled mono stable relay designed in KiCad.
MuffinByteLabs/esp32s3-plant-monitor
Portfolio PCB: ESP32-S3 Wi-Fi plant monitor. 4-layer KiCad 10 design, fabricated and assembled at JLCPCB — schematic, reviews and the frozen manufacturing package all readable in-browser.
nikolaus018/dji-fcc-esp32
ESP32-S3 firmware that switches a DJI N1 remote to FCC mode over USB (replaces the Android app)
olliiiver/kicad_nmea2000_sensor
NMEA 2000 KiCAD PCB and sketch for analog inputs (e.g. water level, fuel gauge, switch, etc ...)
OpenModbus/OM-16LED
A compact industrial-grade 16-channel Modbus RTU LED driver.
polykit/polykit-x-controlboard
Control board schematics and PCB for my polyphonic synthesizer
