Neopixel

35 boards

KiCad boards from 18 GitHub repositories tagged “neopixel”, the most starred first; open any of them in PCBKit.

2 layers
Encoder Board
isotope-engineering/RGB-Encoder-Board

24 parts53
2 layers64 × 55 mm
Encoder panel
FutureSharks/preamp-two
An digitally controlled hi fi preamplifier 🔈🎵
47 parts46GPL-3.0
2 layers69.3 × 80 mm
Hexy
sqfmi/hexy
Hexy by SQFMI
97 parts10MIT
2 layers77.5 × 45.7 mm
NeoBit
mignon-p/NeoBit
KiCad files for a board that lets you hook up NeoPixels to a BBC micro:bit. The board also has a couple of slide potentiometers for input.
27 parts6CC-BY-SA-4.0
2 layers100 × 22 mm
PCBv2
adaand00/TINYLED
Light-up sign with an attiny10 and three ws2812b RGB LEDs.
20 parts5GPL-3.0
4 layers80 × 40 mm
Stm32g0
stefan-misik/ws2812b-light
Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070
84 parts3MIT
2 layers106.7 × 78.7 mm
Spinning Light
ArwedMeinert/Spinning-Light
Spinning light to connect with a power trainer and to show the power zone one is currently in.
30 parts2MIT
2 layers93.1 × 65.5 mm
Butterfly
mignon-p/butterfly-hw
KiCad and Gerber files for a nightlight shaped like a butterfly.
30 parts2CC-BY-SA-4.0
2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1
2 layers93.1 × 65.5 mm
ButterflyChain
mignon-p/ButterflyChain
KiCad files for a chainable NeoPixel butterfly.
26 parts1CC-BY-SA-4.0
2 layers50.8 × 50.8 mm
LedController
ngdrascal/IcicleLights
A remix of Adafruit's Holiday Icicle Lights with Flair build.
16 parts1CERN-OHL-P-2.0
2 layers62.5 × 103.3 mm
Interactiles Controller
sullyjason/interactiles
Interactive LED button grids that connect two locations over MQTT — press a button in one place, see it light up in the other. ESP32 + NeoPixel switch hardware, KiCad designs, and firmware.
60 parts1
2 layers48 × 10 mm
Tinyneostick
todbot/tinyneostick
Neopixel stick with 16 WS2812-2020 LEDs in 48mm x 10mm
18 parts1GPL-3.0
2 layers23.4 × 51.1 mm
Bled pico w backpack
DanNixon/bled
Versatile control board for WS2812 compatible LED fixtures. Using WebAssembly for effects and Bluetooth Low Energy for control.
40 partsMIT
4 layers100 × 80 mm
BluePixelMatrix
SimulatedFlow/kicad-board-2026-07-27-bluepixelmatrix
BluePixelMatrix - STM32 Bluepill addressable RGB pixel matrix board. Hand-solderable THT, bare PCB. KiCad source files.
142 parts
2 layers84 × 90 mm
Base
taikiishii/microbit_raygun
micro:bit と赤外線で遊ぶ射的ゲーム。KiCad 基板・3D プリントデータ・MakeCode コード一式
70 partsMIT
2 layers90 × 64 mm
Divine light
tobycm/divine-light
A handheld device with neopixels so you can have lights wherever you want :b
88 partsMIT
2 layers98 × 98 mm
Irl raver
tobycm/irl-raver

317 parts
2 layers90.2 × 52.1 mm
Input selector
FutureSharks/preamp-two
An digitally controlled hi fi preamplifier 🔈🎵
46 parts46GPL-3.0
2 layers50.5 × 49 mm
Mcu board
FutureSharks/preamp-two
An digitally controlled hi fi preamplifier 🔈🎵
22 parts46GPL-3.0
2 layers45.7 × 52.1 mm
Mdac attenuator
FutureSharks/preamp-two
An digitally controlled hi fi preamplifier 🔈🎵
34 parts46GPL-3.0
2 layers141 × 52.1 mm
Rca panel
FutureSharks/preamp-two
An digitally controlled hi fi preamplifier 🔈🎵
27 parts46GPL-3.0
2 layers80 × 40 mm
Att85
stefan-misik/ws2812b-light
Minimalist Christmas lights using WS2812B LEDs and ATtiny85 or STM32G070
41 parts3MIT
2 layers40.6 × 20.3 mm
LedDripStrand
ngdrascal/IcicleLights
A remix of Adafruit's Holiday Icicle Lights with Flair build.
9 parts1CERN-OHL-P-2.0