4 layers234 × 84 mm
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
234 parts3kApache-2.0
2 layers98 × 98 mm
Irl raver
tobycm/irl-raver- Size
- 98 × 98 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 317
- Nets
- 316
- Pads
- 1,051
- Tracks, vias
- 1,121, 370
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Apr 2026
- Updated
- 25 Apr 2026
Overview
Irl raver is an open-source printed circuit board by tobycm, from the tobycm/irl-raver repository on GitHub. It is a 2-layer board of 98 × 98 mm with 317 parts on 316 nets, routed with 1,121 tracks and 370 vias.
It is built around the SK6812MINI-E and EC12E24404A9. Its parts include 173 diodes, 75 capacitors, 32 resistors, 30 connectors and 3 ICs. It belongs with the power and audio and music boards and the RP2040 boards of this library.
Main components
2
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
EC12E24404A9
插件-10℃~+70℃ 1mA 24/24 5V Incremental Straight Two-phase output 插件 Rotary Encoders ROHSALPSALPINERotary Encoders
Parts
317| Qty | Value | Footprint | References |
|---|---|---|---|
| 162 | SK6812MINI | misc:SK6812MINI-HS | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +146 |
| 27 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C49 +11 |
| 22 | Conn_01x01 | TestPoint:TestPoint_Pad_D2.5mm | J11, J12, J13, J14, J16, J17, J18, J19, J25, J26, J28, J29, J30, J31, J32, J33 +6 |
| 21 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10, R12, R21, R22, R23, R24, R25, R26, R27, R28, R29, R32, R33, R34, R35, R36 +5 |
| 14 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C23, C24, C25, C29, C35, C37, C40, C45, C47, C56, C57, C58, C59, C60 |
| 14 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26, C27, C28, C30, C36, C38, C41, C46, C48, C61, C62, C63, C64, C65 |
| 8 | 2.2nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C31, C33, C43, C44, C66, C67, C68, C69 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39, C42, C70, C71, C72, C73 |
| 6 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D165, D166, D167, D168, D169, D170 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32, C34, C74, C75 |
| 4 | 220 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R37, R38, R39 |
| 4 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R30, R31 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R5, R13 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D161, D172, D173 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3 |
| 3 | PJ-320D-A | PJ-320D-A:HRO_PJ-320D-A | J1, J2, J27 |
| 2 | 1mF | Capacitor_SMD:CP_Elec_8x10.5 | C21, C22 |
| 2 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21, J23 |
| 2 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J22, J24 |
| 2 | D_Schottky | Diode_SMD:D_SOD-128 | D162, D171 |
| 1 | EC12E24404A9 | misc:RotaryEncoder_Alps_EC12E_Vertical_H20mm | SW21 |
| 1 | PCM1808PWR | PCM1808PWR:PW14 | U3 |
| 1 | PCM5100APWR | PCM5100APWR:PW0020A | U2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal | J3 |
| 1 | XIAO-RP2040-DIP | XIAO:XIAO-RP2040-DIP | U1 |
Questions
How big is the Irl raver PCB?
It measures 98 × 98 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Irl raver use?
317 parts, built around the SK6812MINI-E and EC12E24404A9. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Irl raver KiCad files?
From the tobycm/irl-raver repository on GitHub, at the commit this page was made from: the board is irl-raver.kicad_pcb and its schematic audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Irl raver design in my own project?
Its repository states no licence, so its author keeps all rights: ask tobycm before reusing the design.
Similar boards
- 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
106 parts575GPL-2.0 - 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
62 parts517GPL-2.0 - 4 layers82.5 × 39.4 mm
V4head
makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.
26 parts493GPL-3.0 - 2 layers115.7 × 95.7 mm
- 4 layers70 × 54 mm
