2 layers72 × 50 mm
SensorHub
Kampi/SensorHub
Solar-powered, low energy environment sensor node with WiFi interface.
42 parts1GPL-3.0
IoT
408 boardsKiCad boards from 252 GitHub repositories tagged “iot”, the most starred first; open any of them in PCBKit.
- 2 layers25.7 × 21 mm
Esp pmc
ldab/esp-battery-pmb
ESP32, ESP8266 and the likes Battery Management Board, Power your device with a single Battery or 2xAAA. With a buit-in Boost and Buck converter + Nano Timer - Sleep Current < 1uA.
27 parts1MIT - 2 layers94 × 55 mm
Contrib cal 2
Logan-Fouts/Contrib_Cal
A physical GitHub contribution calendar that brings your coding activity to life with LEDs. Built on the Raspberry Pi Pico W and programmable in MicroPython, this is an open-source project.
31 parts1 - 2 layers
Switch Board
Manul-Electronics/M-Sens
M-Sens is a wireless module who can measure temperature and relative humidity in a room
13 parts1Apache-2.0 - 2 layers269.2 × 149.9 mm
Mainwork
MaximSpeczyk/IoT-FPGA
University Project Teamwork for Advanced Embedded Systems and Hardware Engineering.
125 parts1 - 2 layers50.3 × 30 mm
- 2 layers50 × 30 mm
- 2 layers48 × 48 mm
Metstat
MRtecno98/metstat
Autonomous, unattended, solar-powered, meshed network IoT weather probe
33 parts1 - 4 layers28 × 55 mm
ESP32 Custom DevBoard
nakul-biovaco/ESP32-Custom-PCB
Production-Grade 4-Layer ESP32-WROOM-32E Custom Development Board with Synchronous Buck Converter & Type-C (KiCad 8/10, JLCPCB PCBA Ready)
52 parts1MIT - 2 layers273.9 × 208.8 mm
Placa todo en uno
NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).
50 parts1 - 4 layers60 × 31 mm
GarageDoor pro
nikolaus018/garageDoor-pro
ESP32-C3 + GPS board that opens the garage door when you leave and arrive: firmware, KiCad PCB and perfboard build
46 parts1MIT - 2 layers94 × 73.7 mm
Iot switch
Nurgak/IoT-Household-Plant-Watering-System
Internet connected water pump to automatically irrigate household plants
11 parts1 - 2 layers80 × 22.9 mm
SwiftSoilMoistureZigbeeSensor
OliverSwift/SwiftZigbeeSoilMoistureSensor
A Zigbee adaptor for Capacitive Soil Moisture Sensor based on nrf52840
12 parts1AGPL-3.0 - 4 layers222 × 100 mm
HydroScan V1
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
156 parts1 - 2 layers80 × 60 mm
- 2 layers29.5 × 44.7 mm
- 2 layers10.2 × 9.1 mm
Charge pump
rmingon/charge_pump
IOT - Ultra tiny 3.3V or 2.5V Step-Up/Step-Down Charge Pump DC/DC Converter
5 parts1 - 2 layers66 × 73 mm
- 2 layers94 × 59.3 mm
GaitPCB2
rTiagoS/HumanGait
Repositório para o desenvolvimento do projeto "Classificação de Marcha Anômala utilizando técnicas de Machine Learning e Sensores Embarcados."
10 parts1 - 2 layers96 × 76 mm
Pinpath
rwrife/pinpath
USB-powered RP2040 cable and wiring-harness tester for makers to map low-voltage pin continuity, catch opens/shorts/crossovers, and save local test reports without cloud accounts.
160 parts1MIT - 2 layers53 × 53.2 mm
Attendance System v1
sgariba21-beep/esp32-attendance-device
An ESP32-based fingerprint device for automating attendance in schools and other institutions
5 parts1AGPL-3.0 - 4 layers96 × 43 mm
Outdoor module
shm-dmitry/auto_close_window
This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"
127 parts1Apache-2.0 - 2 layers44 × 20 mm
- 2 layers
Calidad aire
sowiroar/Synergia
The project collects data on variables such as temperature, humidity, CO2 concentration and air quality to generate reports and visualizations on the state of the environment in real time and over time.
12 parts1