2 layers15.1 × 11.6 mm
Sensor Board
Manul-Electronics/M-Sens
M-Sens is a wireless module who can measure temperature and relative humidity in a room
3 parts1Apache-2.0
2 layers
Switch Board
Manul-Electronics/M-Sens1M-Sens is a wireless module who can measure temperature and relative humidity in a room
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 46
- Pads
- 90
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Sep 2022
- Updated
- 31 Dec 2024
Overview
Switch Board is an open-source printed circuit board by Manul-Electronics, from the Manul-Electronics/M-Sens repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 13 parts on 46 nets.
It is built around the TMLM 04112 and 150224RS73100A. Its parts include 4 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 diode. It belongs with the home automation and IoT and radio and wireless boards and the ESP32 boards of this library.
Main components
2README
README.mdM-Sens
M-Sens is a family of Open Source and Open Hardware sensors.
For now on this family includes the following devices :
- (Work in progress) Tropic : A headless relative humidity and temperature sensor build around the HTU31D from TE Connectivity
- (Work in progress) Mother : A Raspberry Pi based gateway with support for a variaty of communication protocols (Ethernet, Wi-Fi, BLE, Zigbee, ...) built to act as home automation server and central point.
Other devices could join the family in the future but as I work alone it could be in a very long time.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 696106003002 | manul_tech:696106003002 | J2, J3 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10K | Capacitor_SMD:C_0402_1005Metric | R1 |
| 1 | 150224RS73100A | manul_tech:LED_2214 | D1 |
| 1 | 173010335 | manul_tech:173010335 | U2 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 691218410003 | manul_tech:691218410003 | J1 |
| 1 | ESP32-WROOM-32UE_(16MB) | manul_tech:XCVR_ESP32-WROOM-32UE_(16MB) | U1 |
| 1 | TBD | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | TMLM_04112 | manul_tech:CONV_TMLM_04112 | PS1 |
More from Manul-Electronics/M-Sens
1Similar boards
- 4 layers100 × 100 mm
- 2 layers40 × 20 mm
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0
Questions
What parts does the Switch Board use?
13 parts, built around the TMLM 04112 and 150224RS73100A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switch Board KiCad files?
From the Manul-Electronics/M-Sens repository on GitHub, at the commit this page was made from: the board is Hardware/Switch Board/Switch Board.kicad_pcb and its schematic Hardware/Sensor Board/Sensor Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switch Board design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).