2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers
Calidad aire
sowiroar/Synergia1The project collects data on variables such as temperature, humidity, CO2 concentration and air quality to generate reports and visualizations on the state of the environment in real time and over time.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 38
- Pads
- 84
- Tracks, vias
- 153, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Sep 2024
- Updated
- 10 Dec 2024
Overview
Calidad aire is an open-source printed circuit board by sowiroar, from the sowiroar/Synergia repository on GitHub. It is a 2-layer board with 12 parts on 38 nets, routed with 153 tracks and 0 vias.
Its parts include 3 ICs, 2 resistors and 1 connector. It belongs with the sensors and measurement and home automation and IoT boards and the ESP32 boards of this library.
README
README.mdCéfiro
Céfiro is an air quality monitoring project that integrates environmental sensors, embedded systems and machine learning models to predict and analyze atmospheric conditions in the city of Manizales. The project collects data on variables such as temperature, humidity, CO2 concentration and air quality to generate reports and visualizations on the environmental status in real time and over time.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1 |
| 1 | Battery_Cell | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | BT1 |
| 1 | DOIT-ESP32-DEVKIT-V1 | footprint_project:ESP32_DEVKIT1 | U1 |
| 1 | Micro_SD_Card | footprint_project:microSD | J1 |
| 1 | ~ | footprint_project:MH_Z19B | A3 |
| 1 | ~ | footprint_project:MQ_135 | A1 |
| 1 | ~ | footprint_project:USB_TP4056 | U3 |
| 1 | ~ | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | A2 |
| 1 | ~ | footprint_project:conv_niv_log | U2 |
| 1 | ~ | footprint_project:OLED_128064 | A4 |
| 1 | ~ | footprint_project:DHT22 | A5 |
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
What parts does the Calidad aire use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Calidad aire KiCad files?
From the sowiroar/Synergia repository on GitHub, at the commit this page was made from: the board is Calidad_aire_kicad/Calidad_aire.kicad_pcb and its schematic Calidad_aire_kicad/Calidad_aire.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Calidad aire design in my own project?
Its repository states no licence, so its author keeps all rights: ask sowiroar before reusing the design.