Heypcb

17 boards

KiCad boards from 17 GitHub repositories tagged “heypcb”, the most starred first; open any of them in PCBKit.

2 layers53.9 × 62.6 mm
Moon light
HeyPCB/moon-light
Luna, the night-light moon: A sleepy moon that turns on at dusk and tucks itself in after you fall asleep. KiCad 10, heypcb.ai merch.
36 parts1CERN-OHL-S-2.0
2 layers50.6 × 62.2 mm
Air ghost
HeyPCB/air-ghost
Air Ghost: A little ghost that blushes red when your room needs fresh air. KiCad 10, heypcb.ai merch.
19 partsCERN-OHL-S-2.0
2 layers63.2 × 85 mm
Badge blob
HeyPCB/badge-blob
Blob, the social battery badge: The name badge that tells people whether to come say hi. KiCad 10, heypcb.ai merch.
18 partsCERN-OHL-S-2.0
2 layers40 × 96.1 mm
Cable bunny
HeyPCB/cable-bunny
Cable Bunny: Is it a charge-only cable? Ask the bunny. KiCad 10, heypcb.ai merch.
25 partsCERN-OHL-S-2.0
2 layers42 × 53.2 mm
Fridge owl
HeyPCB/fridge-owl
Hoot, the fridge reminder owl: The fridge owl that blinks at you until you've taken your meds and had your water. KiCad 10, heypcb.ai merch.
13 partsCERN-OHL-S-2.0
4 layers64 × 80 mm
Iris brainstem
HeyPCB/iris-brainstem
Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.
97 partsCERN-OHL-S-2.0
2 layers116 × 12 mm
Iris brow
HeyPCB/iris-brow
Iris Brow: forehead sensor strip of the Iris robot head. VL53L1X distance, APDS-9306 light, two I2S microphones 108 mm apart, touch pads, on a brow-shaped board. 2-layer KiCad 10 board, DRC-clean, fab-ready.
20 partsCERN-OHL-S-2.0
4 layers80 × 40 mm
Iris cortex
HeyPCB/iris-cortex
Iris Cortex: head controller of the Iris robot head. ESP32-S3 (16 MB flash, 8 MB PSRAM), OV2640 eye-camera FPC, iris-ring LED drivers, harness hub.
77 partsCERN-OHL-S-2.0
2 layers18 × 17.4 mm
Iris ring
HeyPCB/iris-ring
Iris Ring: the 18 mm annular LED board behind each iris of the Iris robot head. 12 WS2812-2020 pixels around the camera lens. 2-layer, 0.8 mm KiCad 10 board, DRC-clean, with gerbers, BOM, CPL, STEP and renders.
30 partsCERN-OHL-S-2.0
6 layers48 × 52 mm
Kestrel esc
HeyPCB/kestrel-esc
Kestrel 4in1: 6S 4-in-1 ESC running stock AM32 on four STM32G071s, with 24 CSD18540 FETs, LM5109B drivers and battery current sensing. 48 x 52 mm 6-layer KiCad 10 board, DRC clean, with gerbers, BOM, CPL and STEP.
174 partsCERN-OHL-S-2.0
6 layers40 × 40 mm
Kestrel fc
HeyPCB/kestrel-fc
Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.
114 partsCERN-OHL-S-2.0
4 layers28 × 28 mm
Kestrel gps
HeyPCB/kestrel-gps
Kestrel GPS: u-blox MAX-M10S under a 25 mm ceramic patch with an LIS3MDL compass, for Betaflight, INAV and ArduPilot. 28 x 28 mm 4-layer KiCad 10 board, DRC clean, with gerbers, BOM, CPL and STEP.
14 partsCERN-OHL-S-2.0
2 layers80 × 125.3 mm
Phone robot
HeyPCB/phone-robot
Bolt, the phone stand robot: A little robot that holds your phone, charges it, and peeks over the top to tell you how it's eating. KiCad 10, heypcb.ai merch.
35 partsCERN-OHL-S-2.0
2 layers40.3 × 127.9 mm
Plant buddy
HeyPCB/plant-buddy
Sprout, the plant buddy: A circuit-board sprout that cries a little blue tear when your plant is thirsty. KiCad 10, heypcb.ai merch.
16 partsCERN-OHL-S-2.0
2 layers69.6 × 66.4 mm
Pomodoro pal
HeyPCB/pomodoro-pal
Pomodoro Pal: A tomato on your desk that keeps you focused for 25 minutes, without your phone. KiCad 10, heypcb.ai merch.
41 partsCERN-OHL-S-2.0
2 layers156 × 55.9 mm
Ruler dino
HeyPCB/ruler-dino
Ruler Dino: The bench ruler that measures, sizes screws and tests your wires. KiCad 10, heypcb.ai merch.
13 partsCERN-OHL-S-2.0
2 layers40.3 × 61.3 mm
Torch cat
HeyPCB/torch-cat
Torch Cat: Boop the cat's nose and its eyes light up your keyhole. KiCad 10, heypcb.ai merch.
18 partsCERN-OHL-S-2.0