2 layers37 × 39.8 mm
Hackclub
37 boardsKiCad boards from 29 GitHub repositories tagged “hackclub”, the most starred first; open any of them in PCBKit.
- 4 layers52 × 69 mm
- 2 layers92.9 × 46.9 mm
- 4 layers95 × 43 mm
Reflow Plate Controller
incend1um3/USB-C-PD-Reflow-Plate
300W PCB Reflow Plate with USB-C PD Support
83 parts2CERN-OHL-S-2.0 - 2 layers72.8 × 83.8 mm
- 2 layers63.2 × 30.6 mm
UsbC2UsbA
TheusHen/UsbC2UsbA
My first PCB: USB-C to USB-A adapter. A simple project for learning and warming up for Hack Club Highway 2026. Includes schematic, 3D view, and PCB design.
8 parts2GPL-3.0 - 2 layers36 × 55 mm
HermesTemp
bunnypranav/hermesTH
Hermes-TH is a small PCB that combines a temperature and humidity sensor, pressure sensor, and accelerometer, specifically the AHT20-F, AGR10, STK8328-C with a tiny OLED display, all controlled by a XIAO RP2040.
16 parts1 - 2 layers21 × 51 mm
CustomDevBoard
fajr-lilypad/blu-board
A custom devboard (my first!) Built off of a RP2040, special LED. A more advanced project so I could get used to complex routing, placement, and assembly.
40 parts1 - 4 layers25.4 × 43 mm
HackClubNano
gianluca-rainis/RedBoard
Redboard YSWS - Design an RP2040-powered board, get funds to build it!
33 parts1 - 2 layers100 × 50 mm
Lightup namebadge
headblockhead/lightup-namebadge
A small badge/lanyard thingy with some basic transistor logic and LEDs to light up the darkness.
26 parts1 - 2 layers92 × 48 mm
- 2 layers100 × 100 mm
Hackpad
lixtheyt/mediapad
Mediapad is a HackPad project made by Hack Club. Mediapad was created because of the Stardance project as a HackPad mission.
42 parts1MIT - 2 layers61 × 81 mm
Piperpad
PriyanshuPz/piperpad
PiperPad is a tiny 3×3 hackpad with per-key RGB and a personality.
19 parts1 - 2 layers82.5 × 82.5 mm
Voxpad
shadedvox/voxpad
A macropad purpose built for me. Built with Blueprint, Hackclub. It is a Macropad with 11 keys, a Rotary Encoder, 1 0.91 128x32 OLED and the SEEED XIAO RP2040.
28 parts1 - 2 layers31.6 × 0.6 mm
Ignix
vkunamneni1/Ignix
Ignix - A PCB-built rhythm toy that lights up an LED and buzzes a motor with button presses, allowing users to tap out customizable light and haptic pulses (through the use of a potentiometer-controlled timer circuit).
16 parts1 - 2 layers116.6 × 99.3 mm
Achroma Choc
XinyiC222/Achroma
Wireless split keyboard with 36 keys. Low profile/MX and hot swapable.
77 parts1MIT - 2 layers100 × 76 mm
Vita hackpad
ambarpc406-source/vita-hackpad
it is a hack pad which uses 6 tactile switches for the keyboard
12 parts - 2 layers92 × 54 mm
Blare clock
draarivpatel-ui/blare-clock
BlareClock: XIAO ESP32-C3 desk alarm clock with 2.25in ST7789 TFT, DS3231 RTC, 85dB piezo buzzer, KiCad 8 PCB, and OpenSCAD enclosure
12 partsMIT - 2 layers68 × 84 mm
Aarivpad
draarivpatel-ui/hackpad
AarivPad: 3x3 mechanical macropad with EC11 rotary encoder, 128x32 OLED, SK6812 RGB underglow, KiCad 8 PCB, OpenSCAD case, and KMK firmware
29 partsMIT - 2 layers21 × 51 mm
Devboard
emilyahmad/devboard
RP2040 MCU, USB-C connector, SPI flash memory, 2 switches, a crystal oscillator
38 parts - 2 layers69.1 × 95.2 mm
- 2 layers156.9 × 61.5 mm
GG battle robot v1
gethin101/GG-Battle-robot
Custom robot wars inspired GG Battle Robot designed during Hackclub’s blueprint YSWS program
13 parts - 4 layers348.5 × 118 mm
- 2 layers50 × 55 mm
SimpleFlightController
Ningheim/Pathfinder
A compact 2-layer flight controller built around the STM32F722 — onboard 2S battery charging, IMU + barometer, microSD logging, two servo outputs. Currently working through final layout cleanup before fab.
82 parts