2 layers42 × 67 mm
4 layers25.4 × 43 mm
HackClubNano
gianluca-rainis/RedBoard1Redboard YSWS - Design an RP2040-powered board, get funds to build it!
- Size
- 25.4 × 43 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 53
- Pads
- 179
- Tracks, vias
- 399, 70
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Apr 2026
- Updated
- 25 Apr 2026
Overview
HackClubNano is an open-source printed circuit board by gianluca-rainis, from the gianluca-rainis/RedBoard repository on GitHub. It is a 4-layer board of 25.4 × 43 mm with 33 parts on 53 nets, routed with 399 tracks and 70 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 16 capacitors, 5 resistors, 4 connectors, 2 ICs and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdRedboard
Design an RP2040-powered board, get funds to build it!
What is Readboard
Redboard is a YSWS where students design a custom RP2040-powered PCB from scratch, earn credits based on tracked hours, and redeem them for grants to manufacture and build their board.
How does it works
For each project there will be two phases:
- The design phase, where participants design any RP2040-powered board, develop the PCB and track their time spent on KiCad with Lapse. After shipping the project, they will receive 1 credit per hour tracked.
- The build phase, where participants spend their credits in the shop to get: a PCB manufacturing grant; a components grant; optional tools (soldering iron, multimeter, etc.). Then they physically build the board, tracking the build time with Lapse and earning additional credits.
What a shipped project will have
A shipped Phase 1 project includes:
- Public GitHub repo with all the source files
- Handwritten README and JOURNEY files
- Photos of the board design
A shipped Phase 2 project includes:
- A short video of the board working
- Photos of the assembled board
Colors
#c01749 #d42060 #e01f5a
Env file content
SITE_URL
The url of the site
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C15, C16 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 27.4 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | Conn_01x18 | Connector_PinHeader_2.00mm:PinHeader_1x18_P2.00mm_Vertical | J1, J3 |
| 1 | 0 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J2 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | RP2040 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the HackClubNano PCB?
It measures 25.4 × 43 mm and has 4 copper layers, 1.6 mm thick.
What parts does the HackClubNano use?
33 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HackClubNano KiCad files?
From the gianluca-rainis/RedBoard repository on GitHub, at the commit this page was made from: the board is hardware/HackClubNano/HackClubNano.kicad_pcb and its schematic hardware/HackClubNano/HackClubNano.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HackClubNano design in my own project?
Its repository states no licence, so its author keeps all rights: ask gianluca-rainis before reusing the design.