Gpio

25 boards

KiCad boards from 18 GitHub repositories tagged “gpio”, the most starred first; open any of them in PCBKit.

2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0
2 layers20.3 × 25.4 mm
OrangePiZero GPS NTP Server
moonbuggy/Orange-Pi-Zero-GPS-NTP
An Orange Pi Zero GPS disciplined NTP server, with an SPI TFT display.
5 parts23
2 layers83.8 × 41.4 mm
Sensor Data Logger
jminjares4/ESP32-Sensor-Data-Logger
Custom ESP32 sensor data logger
73 parts11
2 layers55 × 44 mm
Cff3000-pcb
sre/cff3000-pcb
CFF3000 GPIO Interface
22 parts10
2 layers65 × 56 mm
B33rn4ryCounterPCB
Geraffel-Village/Beernary
Hard- & software stack for authentication, authorization and accounting of your private beer tap via RFID tokens. Created by the Geraffel gang, it runs reliably on very simple and cheap hardware.
15 parts8GPL-2.0
4 layers160 × 90 mm
Motherboard v3C
Astronuat21/4DS
An unnofficial succesor to the Nintendo 3DS.
373 parts5AGPL-3.0
2 layers30 × 65 mm
PiZeroLEDController
sudermanjr/led-controller
Golang Code, Image Builder, and PCB for a Pi-ZeroW NeoPixel Controller
9 parts5Apache-2.0
2 layers250.2 × 95.3 mm
Keyboard
EmilSchaetzle/PI-Book
Development of a Raspberry Pi based laptop.
91 parts4GPL-3.0
2 layers56.9 × 63.9 mm
Opi hat
eddyem/ARMsingleboard
Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.
53 parts2GPL-3.0
2 layers116.8 × 25.4 mm
GPIO power switch
moonbuggy/GPIO-power-switch
A low-side MOSFET switch controlled by a button and GPIO signals
44 parts2
4 layers51.4 × 61 mm
GAMEBOY STM32 CART
ice-bergtech/Icecart-GB
A ROM cartridge for the Gameboy
113 parts1MPL-2.0
4 layers22.9 × 14 mm
I2c led
lbthomsen/i2c_led
Creating a I2C RGB LED Board From Scratch
15 parts1
2 layers65 × 30 mm
Rpi breakout
mtrudel/rpi-breakout
A simple Raspberry Pi pHAT to break out common interfaces & GPIO
37 parts1
2 layers55 × 28 mm
Pihole display cape
Ajimaru/pihole-display
OLED status display for Pi-hole and Unbound on a BeagleBone Black, with hardware buttons and a web UI.
3 partsMIT
2 layers65 × 23.5 mm
Picise
ckuhtz/picise
Prototype for a time / location GNSS accessory for a Raspberry Pi 40-pin GPIO.
39 partsCC-BY-SA-4.0
2 layers65 × 56 mm
QuadMotorHAT
itsjeanxx12/QuadMotorHAT
A custom Raspberry Pi HAT for controlling four DC motors with simple Python control.
17 partsMIT
2 layers238.5 × 59.7 mm
Mm8d
pozsarzs/mm8d-hw
Hardware of MM8D central controlling and remote monitoring device for growing house
94 parts
4 layers100 × 80 mm
BluepillIOCarrier
SimulatedFlow/kicad-board-2026-07-16-bluepill-io-carrier
STM32 Bluepill IO carrier board - breakout / baseboard with screw terminals, relay and GPIO headers. Hand-solderable THT, bare PCB. KiCad source files.
39 parts
2 layers37 × 19 mm
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
2 parts4.4kGPL-2.0
2 layers34 × 63.9 mm
CTRL L
Astronuat21/4DS
An unnofficial succesor to the Nintendo 3DS.
31 parts5AGPL-3.0
2 layers99.8 × 92.3 mm
CTRL panelized
Astronuat21/4DS
An unnofficial succesor to the Nintendo 3DS.
100 parts5AGPL-3.0
2 layers34 × 17 mm
CTRL PWR
Astronuat21/4DS
An unnofficial succesor to the Nintendo 3DS.
6 parts5AGPL-3.0
2 layers25 × 20 mm
CTRL Z
Astronuat21/4DS
An unnofficial succesor to the Nintendo 3DS.
10 parts5AGPL-3.0
2 layers48 × 46 mm
Opi hat
eddyem/ARMsingleboard
Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.
37 parts2GPL-3.0