2 layers363.7 × 103.4 mm
Xfm2-ui board
bendecaf/xfm2-pcbs
PCBs for the excellent FPGA synth projects XFM2 and XVA1.
95 parts22GPL-3.0
2 layers250.2 × 95.3 mm
Keyboard
EmilSchaetzle/PI-Book4Development of a Raspberry Pi based laptop.
- Size
- 250.2 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 93
- Pads
- 450
- Tracks, vias
- 1,902, 17
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Aug 2018
- Updated
- 26 Mar 2019
Overview
Keyboard is an open-source printed circuit board by EmilSchaetzle, from the EmilSchaetzle/PI-Book repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 250.2 × 95.3 mm with 91 parts on 93 nets, routed with 1,902 tracks and 17 vias.
It is built around the ATMEGA2560-16AU. Its parts include 79 switches, 3 capacitors, 2 connectors, 1 resistor and 1 IC. It belongs with the computers and single-board computers and keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPI-Book
This repository features the development of a new Raspberry Pi based mobile laptop. This new laptop is optimized by focusing on battery life instead of computing power. A solar panel is used as well to guarantee the energy supply in areas with no access to electricity. Additionally we implemented several interfaces that are not usually found in modern laptops but are very effective for measuring and development such as a RS 232 port, I2C, or a few raw GPIO pins. The product itself could become a cost-efficient solution for developing countries.
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 78 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW0, SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22 +62 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH0, MH1, MH2, MH3 |
| 3 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 8M | Crystal:Resonator-3Pin_W6.0mm_H3.0mm | Y1 |
| 1 | ATmega2560-16AU | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | JOYSTICK_THUMB | JOYSTICK:JOYSTICK | S1 |
| 1 | PI-Connector | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
Questions
How big is the Keyboard PCB?
It measures 250.2 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
91 parts, built around the ATMEGA2560-16AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the EmilSchaetzle/PI-Book repository on GitHub, at the commit this page was made from: the board is keyboard/schematic/keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers101.6 × 53.3 mm
- 4 layers100 × 100 mm
- 4 layers99.1 × 91.4 mm
- 4 layers29.3 × 187.1 mm
Left Frame
FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
127 parts14 - 2 layers94.6 × 66.7 mm
Servo control
rmingon/hexapod
Project for make Hexapod with esp32 controlled by wifi and LIDAR
80 parts3 - 2 layers50 × 60 mm
FlightControllerBoard
ToolboxPlane/FlightControllerBoard
A flight controller board for the mini Talon UAV based on a STM32 Nucleo-32.
88 parts3 - 2 layers50 × 80 mm
