Firmware

299 boards

KiCad boards from 137 GitHub repositories tagged “firmware”, the most starred first; open any of them in PCBKit.

4 layers76.3 × 49.5 mm
LPC43xx blinky board
blinky101/blinky_lpc43xx
Blinky and tutorials for developing on the LPC43xx platform
66 parts2MIT
2 layers125 × 125 mm
BahayShield ULTRA RevA Manual
cikeyz/bahayshield-ultra
Offline flood and typhoon preparedness controller for Arduino Mega 2560 Pro: ultrasonic water level, BME280 pressure trend, TRI scoring, staged alerts, low-voltage relay cutoff.
76 parts2MIT
2 layers30 × 85.5 mm
Main Deck Longitudinal v0.1
dgtaheno/RocketOS
ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging
11 parts2MIT
2 layers36.8 × 62.2 mm
Plikter
dzervas/plikter
SiCK68 firmware for Adafruit Bluefruit LE (nrf52832) and 2 shift registers
19 parts2
2 layers305.2 × 234.8 mm
Reflow
mickdassive/reflowow-oven-controler
firmware for a reflow controller
117 parts2GPL-3.0
2 layers100 × 100 mm
Biltong board main
myles-parfeniuk/biltong_board
Sun drying emulation controller for biltong and other dried foodstuffs.
89 parts2GPL-3.0
2 layers90 × 42 mm
BLDC
paulmikael02/ESP32-BLDC-Motor-Controller
ESP32-based BLDC motor controller built with ESP-IDF, utilizing Hall sensors and the hardware MCPWM peripheral.
38 parts2
2 layers70.5 × 77 mm
Hall effect panel new
Queens-Rocket-Engineering-Team/av-prop
QRET Avionics PCBs and firmware for integrating with the propulsion stack
194 parts2
2 layers50.8 × 24.1 mm
Embedded debug
stephendpmurphy/embedded-debug
The embedded debug board can be used to provide access to Target MCU debug UART lines carried on unused traces of a 10pin SWD connector
23 parts2CC-BY-SA-4.0
2 layers74.6 × 94.5 mm
E1 power dist 2s
Telfair8632/sr71-600
Twin-engine 600 mm RC Blackbird: parametric FreeCAD CAD, a 14-level Pico 2 firmware verification ladder, and a complete QA-evidenced digital build package
41 parts2MIT
2 layers33.7 × 12 mm
T85-usb
69series/attiny85-usb-hid
ATTiny85 HID automation keyboard both firmware and hardware design in baremetal C and KICAD 10 respectively.
16 parts1MIT
2 layers96 × 74 mm
MacroController
alex1klimovich/nrf52840-macro-controller
Custom nRF52840 productivity controller for digital artists — PCB, BLE/USB firmware, OLED, haptics, RGB, and enclosure CAD.
78 parts1
2 layers39.8 × 41.6 mm
New Project
AssaadMH/mcu-sensor-firmware-studies
A set of small but complete embedded programs — PIC instrumentation with LCD readout, and an NFC tag reader.
12 parts1MIT
2 layers117 × 81.5 mm
PressLog Edge Node
bansalsaksham/PressLog
Manufacturing-ready PCB design for an industrial IoT downtime-logging edge node. Offline-first firmware architecture, KiCad schematics, Gerbers, and BOM.
45 parts1
2 layers40 × 100 mm
PicoDCC
bazauto/PicoDCC
DCC command station firmware for the Raspberry Pi Pico 2 — PIO-generated track signal, partial DCC-EX protocol for JMRI, LVGL touchscreen UI
28 parts1MIT
2 layers86.1 × 121.7 mm
OpenDeck v0
Bugatsec/OpenDeck-RP2040-v0
OpenDeck-RP2040-v0 is a DIY 9-key macro pad prototype inspired by the Elgato Stream Deck, built around the Seeed XIAO RP2040.
32 parts1MIT
2 layers121.5 × 73.1 mm
Testing split kb
devcexx/dxkb
My own firmware for my own keyboard. Written in pure Rust.
37 parts1
2 layers60.5 × 91.5 mm
Kicad sailframes e1
FForzano/xgsail-e1
Open-hardware ESP32 sailing tracker (E1): GNSS/IMU/wind/pressure logging, ESP-NOW mesh for live fleet position + race-start detection, BLE/WiFi upload. Firmware, KiCad PCB, and a published TypeScript client SDK.
21 parts1Apache-2.0
2 layers100 × 100 mm
Master old
formicidae-tracker/hardware
Hardware repository for the FORT system
663 parts1
2 layers185 × 82 mm
Display board
Majklzbastlirny/NixieClock
ESP-IDF firmware for a 6-tube multiplexed ESP32 nixie clock (WiFi/SNTP, Home Assistant, web UI, alarm, temperatures)
112 parts1GPL-3.0
2 layers
TAS RX-900-C3
mhalaba/tas-elrs
TAS-ELRS is an open-source, jamming-resistant radio link for drone control: encrypted RC commands (ChaCha20), anti-replay, EW-status telemetry to the flight controller, deterministic FHSS channel rotation, and…
5 parts1GPL-3.0
4 layers69.5 × 62.6 mm
Power Module
Queens-Rocket-Engineering-Team/av-power
QRET Avionics PCBs and firmware for delivering power to SRAD PCBs
136 parts1
4 layers54 × 94 mm
Enku mainboard r0.1
raznoglaz1y/enku
Open-source compact e-reader built around a 3.97″ e-paper display and ESP32-S3.
156 parts1Apache-2.0
2 layers31.8 × 36.8 mm
Handbrake
StarGate01/Handbrake
Firmware and Hardware for an analog handbrake game controller using an attiny85 and v-usb
12 parts1