2 layers80 × 60 mm
Electronics
1,429 boardsKiCad boards from 602 GitHub repositories tagged “electronics”, the most starred first; open any of them in PCBKit.
- 2 layers100 × 100 mm
Column driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
104 parts44 - 2 layers50.8 × 78.7 mm
- 2 layers39 × 78 mm
Mouse
RandomDelta6/USB-Mouse
A basic USB mouse PCB based on the PAW3526D8-FJY2 Sensor.
31 parts44CC-BY-SA-4.0 - 2 layers57 × 87 mm
Example placement
snhobbs/kicad-parts-placer
Auto place components into pcbnew from a centroid file. Useful for maintaining a common board form factor.
21 parts44LGPL-3.0 - 2 layers68.8 × 53.6 mm
- 2 layers127 × 114.3 mm
- 2 layers19.6 × 15.3 mm
Schematics
pcbcupid/Kicad-7-Series
This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.
13 parts38MIT - 2 layers136 × 58 mm
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 12 layers180 × 150 mm
Marble
BerkeleyLab/Marble
Dual FMC FPGA carrier board developed for general purpose use in particle accelerator electronics instrumentation.
1,006 parts35 - 2 layers65.3 × 18.3 mm
Klipper nano expander
orobardet/klipper_nano_expander
Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
39 parts35MIT - 4 layers60 × 100 mm
- 2 layers100 × 100 mm
- 2 layers99.1 × 99.1 mm
RC1802 CPU
tebl/RC1802-Cosmac-ELF
With the RC6502-project for making an Apple 1 replica done I wanted to do something different, so I started designing a simple version of the RCA 1802-based Cosmac ELF instead.
54 parts31GPL-3.0 - 2 layers28 × 28 mm
- 2 layers124.5 × 77.5 mm
- 2 layers99.6 × 87.6 mm
RF ProtoBoard Extended
maelh/radio-frequency-prototype-boards
Radio frequency prototype boards (based on MegawattKS' design)
12 parts30BSD-3-Clause - 6 layers42.6 × 42.6 mm
Project OAK MAIN BRD V0
0101shift/Project_OAK
All design files, source code, and documentation for Project OAK, a digital watch inspired by mechanical complications.
145 parts29MIT - 2 layers45 × 45 mm
Fiberaudio-108
islandcontroller/fiberaudio-108
A low-cost USB audio interface with S/PDIF optical output, based on the Cmedia CM108 ASIC.
43 parts29 - 2 layers114.3 × 64.8 mm
- 2 layers215 × 72 mm
- 4 layers95 × 95 mm
TelemetryOnboard
Spaceflight-Rocketry-Giessen-e-V/Telemetry
Open-Source Rocket Telemetry System Based On Radiocrafts RC232 Radio Modules
143 parts27CERN-OHL-S-2.0 - 2 layers127 × 76.2 mm
