
Schematics
pcbcupid/Kicad-7-Series
This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.

This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.
Schematics is an open-source printed circuit board by pcbcupid, from the pcbcupid/Kicad-7-Series repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.6 × 15.3 mm with 13 parts on 11 nets, routed with 33 tracks and 3 vias.
It is built around the ATTINY85V-10PU. Its parts include 3 resistors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.
If you have any question or doubts regarding any of the project file, You can drop your questions here : https://pcbcupid.com/questions/
The project is based on a digital version of Diya, which is reactive to light and wind just like real Diya!
Diya - is an oil lamp made from clay or mud with a cotton wick dipped in Oil or ghee. These lamps are commonly used in the Indian subcontinent and they hold sacred prominence in Hindu, Sikh, Buddhist and Jain prayers as well as religious rituals, ceremonies and festivals including Diwali.
You can download the code and 3d mode for the project form here : https://github.com/Neutrino-1/SideQuest/tree/main/Reactive%20Diya
Fabrication Info : https://www.youtube.com/playlist?list=PLn6004q9oeqFoRfbEq5fEx3mE1cEnQz48
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3.3V Cell | CellHolder_THT:CellHolder_CR2032 | Cell Holder |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 5.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 5mm LDR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LDR |
| 1 | 5mm Yellow LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LED |
| 1 | ATtiny85V-10P | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | ATTINY 85 |
| 1 | Microphone_Condenser | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | MIC |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
The 11 most common of 13 parts.

pcbcupid/Kicad-7-Series
This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.



oskitone/higher_lower
A handheld electronic game you can play with your eyes closed




ivourshalldevour/bicycle_odometer
A repository to hold all the code written for the MSP430 microcontroller I used while building my energy harvesting powered bicycle odometer.

jay-waghmare/kicad-ambient-led-system
KiCad-based Ambient LED System - Auto brightness via LDR - Hardware project
It measures 19.6 × 15.3 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the ATTINY85V-10PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pcbcupid/Kicad-7-Series repository on GitHub, at the commit this page was made from: the board is 15_PCB_Optimization/Schematics.kicad_pcb and its schematic 10_PCB_Routing/Schematics.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).