2 layers40.6 × 27.9 mm
Electronic
37 boardsKiCad boards from 19 GitHub repositories tagged “electronic”, the most starred first; open any of them in PCBKit.
- 2 layers99.8 × 99.8 mm
- 2 layers60 × 66.2 mm
VeinFinder SMDLedBoard
ElectronicCats/Vein-Finder
A reliable, easy-to-make and open source device!
43 parts7GPL-3.0 - 2 layers230 × 20 mm
Flute
KN-Hardwire/Electronic-Flute
Electronic Flute project developed by HARDWIRE Student Club at AGH University of Krakow
47 parts6MIT - 2 layers160 × 100 mm
Marine gps
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
115 parts6BSD-2-Clause - 2 layers160 × 100 mm
Attiny prototype board
ma-ha/attiny-prototype-board
Simplifies circuit prototypying with the ATtiny1614
51 parts4MIT - 2 layers98 × 187 mm
Projet
FranklinBerger/Polonise-Inverse
Projet électronique de calculatrice en Polonaise Inversse. Bassée sur un ESP32 sur firmware MicroPython, elle a été initialement conçue dans le cadre d'un stage de découverte de l'électronique durant 1 mois.
137 parts1 - 2 layers25.4 × 45.7 mm
Modulo de Temperatura
joseguerra3000/temperature-module
Temperature module compatible with arduino and digilent cerebot. Useful for calibrating thermoresistors. Able to use three temperature sensors at the same time (LM35, AD22103, Thermoresistor).
15 parts1 - 2 layers73 × 35.6 mm
Twilight switch
joseguerra3000/twilight-switch
System able to control a relee to turn on or off exterior lights depending on the lighting.
24 parts1 - 2 layers40.6 × 27.9 mm
- 2 layers47 × 27.9 mm
- 4 layers48.5 × 43.4 mm
- 2 layers114.5 × 162.3 mm
AKOR 01
arthurkowskii/AKOR_01
having fun building a synth ! C++ programming, PCB design with KiCad, and hands-on hardware work in what some people call “the real world.”
64 parts - 2 layers20.4 × 20 mm
- 2 layers13.2 × 27.4 mm
- 2 layers125 × 120 mm
- 2 layers58 × 74 mm
MiniPicoPCB
Mick3DIY/MiniPicoPCB
A simple PCB for the Raspberry Pi Pico with screw terminal headers
15 partsMIT - 2 layers52 × 44 mm
- 2 layers15.7 × 11.1 mm
SBK SP1
sbarabe/SBK_SP1
Open-source soft power switch module for learning and embedded electronics projects.
13 partsCERN-OHL-P-2.0 - 2 layers61 × 17.8 mm
- 2 layers17.8 × 14 mm
- 2 layers40 × 40 mm
VeinFinder ControlBoard
ElectronicCats/Vein-Finder
A reliable, easy-to-make and open source device!
39 parts7GPL-3.0 - 2 layers60 × 66.2 mm
VeinFinder Thruhole LedBoard
ElectronicCats/Vein-Finder
A reliable, easy-to-make and open source device!
43 parts7GPL-3.0 - 2 layers110 × 35 mm
Buttons board
mbouyer/marine_chartplotter
Hardware and software for an opencpn-based chartplotter
20 parts6BSD-2-Clause