Skip to the content
2 layers110 × 35 mmButtons board, the printed circuit board in 3D

Hardware and software for an opencpn-based chartplotter

Size
110 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
11
Pads
44
Tracks, vias
70, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
13 Mar 2016
Updated
31 May 2022

Overview

Buttons board is an open-source printed circuit board by mbouyer, from the mbouyer/marine_chartplotter repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 110 × 35 mm with 20 parts on 11 nets, routed with 70 tracks and 0 vias.

Its parts include 5 resistors, 5 switches and 4 connectors. It belongs with the interfaces and adapters boards and the PIC boards of this library.

README

README.md

Hardware and software for an opencpn-based chartplotter The kardware has been designed with kicad 4.0.x The chartplotter is built around a A20-based single-board computer from Olimex (https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2/) and a 15" TFT full HD display also from Olimex (https://www.olimex.com/Products/OLinuXino/LCD/LCD-OLinuXino-15.6FHD)

The hardware consist of 4 boards

  • a breakout board for the Lime2, also providing power supplies, an audio amplifier, RS422 and CAN interfaces, and a I2C connection to a PIC18 for power management and TOD clock.
  • a board holding buttons
  • a board holding a GPS module
  • a board for connections to other electronic equipements (VHF, sensors, ...) via a single flat cable.

for more details see the wiki: https://github.com/mbouyer/marine_chartplotter/wiki

Parts

20
QtyValueFootprintReferences
45Glocal:5G-1USSW2, SW3, SW4, SW5
4CONN_01X02local:solder_2x5mmP1, P2, P3, P4
110KResistors_ThroughHole:Resistor_Horizontal_RM10mmR3
111KResistors_ThroughHole:Resistor_Horizontal_RM10mmR2
1330Resistors_ThroughHole:Resistor_Horizontal_RM10mmR1
15G+LEDlocal:5G-1USSW1
16.8KResistors_ThroughHole:Resistor_Horizontal_RM10mmR5
18.2KResistors_ThroughHole:Resistor_Horizontal_RM10mmR4

The 14 most common of 20 parts.

More from mbouyer/marine_chartplotter

4
  • 2 layers160 × 100 mmMarine gps, the printed circuit board in 3D

    Marine gps

    mbouyer/marine_chartplotter

    Hardware and software for an opencpn-based chartplotter

    115 parts6BSD-2-Clause
  • 2 layers78 × 110 mmEdisplay, the printed circuit board in 3D

    Edisplay

    mbouyer/marine_chartplotter

    Hardware and software for an opencpn-based chartplotter

    37 parts6BSD-2-Clause
  • 2 layers61 × 34.3 mmConnect board, the printed circuit board in 3D

    Connect board

    mbouyer/marine_chartplotter

    Hardware and software for an opencpn-based chartplotter

    11 parts6BSD-2-Clause
  • 2 layers58.4 × 21.6 mmGps module, the printed circuit board in 3D

    Gps module

    mbouyer/marine_chartplotter

    Hardware and software for an opencpn-based chartplotter

    9 parts6BSD-2-Clause

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Buttons board PCB?

It measures 110 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buttons board use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buttons board KiCad files?

From the mbouyer/marine_chartplotter repository on GitHub, at the commit this page was made from: the board is hardware/buttons-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buttons board design in my own project?

Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).