Skip to the content
PCBKitNew board

Analog

77 boards

KiCad boards from 32 GitHub repositories tagged “analog”, the most starred first; open any of them in PCBKit.

  • 2 layers118.1 × 101.6 mmTeensy eurorack, the printed circuit board in 3D

    Teensy eurorack

    newdigate/teensy-eurorack

    Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

    102 parts259MIT
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers309.6 × 95.3 mmMacrolev, the printed circuit board in 3D

    Macrolev

    heiso/macrolev

    Macrolev is an open source analog keyboard powered by Hall Effect switches

    184 parts136
  • 2 layers200 × 100 mmPolykit x monosynth, the printed circuit board in 3D

    Polykit x monosynth

    polykit/polykit-x-monosynth

    The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

    167 parts94
  • 4 layers50 × 36 mmAnalog toolkit, the printed circuit board in 3D

    Analog toolkit

    Jana-Marie/analog-toolkit

    A smol and simple STM32G431 based Analog to USB toolkit.

    85 parts74CERN-OHL-S-2.0
  • 2 layers233.7 × 172.2 mmOvercycler3, the printed circuit board in 3D

    Overcycler3

    gligli/overcycler

    Affordable DIY polyphonic hybrid single cycle / analog synthesizer

    335 parts45GPL-3.0
  • 6 layers150 × 100 mmNV Meter rev b, the printed circuit board in 3D

    NV Meter rev b

    curtisseizert/Nanovoltmeter

    A low noise nanovoltmeter design files and code

    552 parts44
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers48 × 36.5 mmOsillyscope etchable, the printed circuit board in 3D

    Osillyscope etchable

    tvlad1234/osillyscope

    Low cost, low part count CH32V003-based oscilloscope

    31 parts30MIT
  • 2 layers68.6 × 53.3 mmUno, the printed circuit board in 3D

    Uno

    nerdyscout/Arduino_MCP3x6x_Library

    Library to support Microchip MPC3x6x 16/24bit analog to digital converters.

    34 parts20MIT
  • 2 layers60 × 85 mmIceScreamer, the printed circuit board in 3D

    IceScreamer

    UC3Music/IceScreamer

    A widely known overdrive pedal

    95 parts19
  • 2 layers20 × 108 mmHelium, the printed circuit board in 3D

    Helium

    wntrblm/Helium

    Helium is a triple 1-to-3 precision buffered multiple and 3-to-1 precision adder

    67 parts17
  • 2 layers110 × 46 mmInput board, the printed circuit board in 3D

    Input board

    bigbrainlabs/BoatOpenIO

    Universal 16-channel analog marine gateway for boats with legacy VDO sensors. Connects analog instruments to MQTT and Signal K without sensor replacement. ESP32-based, open source, modular mini-board system.

    70 parts13
  • 2 layers426 × 43.2 mm1URack 8Input AB 2Output Mixer, the printed circuit board in 3D

    1URack 8Input AB 2Output Mixer

    cracked-machine/1URack_8Input_AB_2Output_Mixer

    Eurorack-compatible 1U 8-channel mixer with selectable A/B outputs.

    59 parts10
  • 2 layers20 × 13.5 mmAS5600 BreakoutBoard V1 0, the printed circuit board in 3D

    AS5600 BreakoutBoard V1 0

    y2kblog/AS5600_BreakoutBoard_V1_0

    12bit分解能の磁気式アブソリュートエンコーダAS5600(アナログ/PWM出力)を2.54mmピッチに変換する基板

    22 parts9MIT
  • 4 layers94 × 43 mmDmxTx, the printed circuit board in 3D

    DmxTx

    microchip-pic-avr-examples/pic16f56q71-audio-light-show-mplab-mcc

    An audio-reactive light show driven by the Q71's analog and DMX capabilities.

    73 parts8
  • 2 layers100 × 114 mmROND - PCB, the printed circuit board in 3D

    ROND - PCB

    faiseur-cz/ROND-sequencer

    This is a repo for an 8 step analog sequencer project in Eurorack format

    116 parts7
  • 2 layers88 × 38.5 mmMonotron-002, the printed circuit board in 3D

    Monotron-002

    Hamlob/Monotron_CV_mod

    A modification for Korg's Monotron Delay, which makes it accept standard Eurorack CV voltages (Pitch, Gate and Cutoff CV). The mod also provides an option to power the monotron via micro-USB.

    52 parts7MIT
  • 2 layers147.4 × 63.2 mmGuitar down octave, the printed circuit board in 3D

    Guitar down octave

    MR-DOS/guitar_down_octave

    A octave-down effect for guitar. All analog, no microcontroller, no DSP.

    219 parts5GPL-3.0
  • 2 layers38.1 × 60.5 mmTDR splitter, the printed circuit board in 3D

    TDR splitter

    MR-DOS/TDR_splitter

    Addon for TDR_avalanche to allow simple TDR cable measurement

    23 parts5GPL-3.0
  • 2 layers85 × 70.5 mmAnalog audio, the printed circuit board in 3D

    Analog audio

    eccentricOrange/bt-speaker

    A Simple Two-way Analog Speaker Amplifier

    44 parts4
  • 2 layers100 × 100 mmParvus psu, the printed circuit board in 3D

    Parvus psu

    nradulovic/hw_parvus

    TDA7293 based audio power amplifier

    67 parts3GPL-3.0
  • 2 layers63 × 28 mmBf-028, the printed circuit board in 3D

    Bf-028

    botanicfields/PCB-ADC-Buttons-for-M5

    a PCB converts 5 buttons into 1 analog output

    22 parts2GPL-3.0