2 layers60.2 × 106.5 mm
TiNRS - DuckTape
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
262 parts87MIT
4 layers119.4 × 110.4 mm
This is not Rocket Science presents: Eurorack modular synthesizer modules!
- Size
- 119.4 × 110.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 249
- Nets
- 222
- Pads
- 898
- Tracks, vias
- 2,090, 378
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Oct 2015
- Updated
- 1 May 2023
Overview
Space is an open-source printed circuit board by ThisIsNotRocketScience, from the ThisIsNotRocketScience/Eurorack-Modules repository on GitHub, published under the MIT licence. It is a 4-layer board of 119.4 × 110.4 mm with 249 parts on 222 nets, routed with 2,090 tracks and 378 vias.
It is built around the ESP32-S3-WROOM-1-N8, MCP6004-E/P and MCP6022-I/P, with the NE5532, PCM3060PW and BL9342 among its other parts. Its parts include 98 resistors, 60 capacitors, 27 diodes, 18 ICs and 4 inductors. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
11
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MCP6022-I/P
PDIP-8-40℃~+125℃ 10MHz 1mA 1pA 1pA 2 2.5V~5.5V 3.5uV/℃ 30mA 500uV 7V/us 8.7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational Amplifier
PCM3060PW
TSSOP-28-25℃~+85℃ 16kHz~192kHz 2.7V~3.6V、4.5V~5.5V Encoder/decoder Serial TSSOP-28 Audio Interface ICs ROHSTexas InstrumentsAudio Interface ICs
BL9342
SOT-23-6-40℃~+125℃@(TJ) 1 1.8MHz 200uA 4.2V~40V 600mA Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSBLDC-DC Converters
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
AT24CS01-STUM-T
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
HCPL-0631
SOT-ALL-8-40℃~+85℃ 1.5V 15kV/us 2 3.75kV 4.5V~5.5V 5mA 75ns 75ns DC Output enable control、Open-collector output SOT-ALL-8 Logic Output OptoisolatorsBroadcom LimitedLogic Output Optoisolators
HT7550-1
SOT-89-3-40℃~+85℃@(Ta) 1 150mA 2.5uA 25mV@(1mA) 30V 5V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdView this project on CADLAB.io.
Eurorack-Modules
This is the central repo for all the "This is not Rocket Science" eurorack modular synth modules.
Please refer to the "Production" folder if you are looking for boards to build. You will find all the design & firmware files for our latest production versions. Artwork is NOT included. Be creative.
All our current development & experiments can be found in the "Development" folder
Sourcecode to the firmware can be found in the Eurorack-KDS repository
Tools needed:
- Eagle 7+
- Kinetis Development Studio (or whatever the latest NXP/freescale IDE is)
- A JTAG probe to flash the initial firmware
Parts
249| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | 56 | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R25, R26, R28, R30, R32, R33, R34, R35, R36, R37, R62, R110, R115 +17 |
| 26 | 100k | Resistor_SMD:R_0402_1005Metric | R38, R39, R40, R41, R44, R45, R46, R47, R102, R103, R104, R105, R106, R114, R116, R117 +10 |
| 24 | LED | LED_THT:LED_D3.0mm_FlatTop | D1, D11, D13, D15, D16, D17, D18, D19, D20, D23, D24, D25, D26, D27, D28, D29 +8 |
| 19 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C13, C16, C26, C27, C28, C29, C31, C32, C33, C34, C35, C36, C45, C46, C47 +3 |
| 15 | AUDIO-JACK_SMALLSYMBOLNODRILL | TiNRS_Eagle_Footprints:3.5MM-JACK-SWITCH-13MM-NOHOLES-TESTPAD | JACK1, JACK2, JACK3, JACK4, JACK5, JACK6, JACK7, JACK8, JACK9, JACK10, JACK11, JACK12, JACK13, JACK14, JACK15 |
| 14 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV8, RV9, RV10, RV11, RV13, RV14, RV15, RV16 |
| 8 | 3.3n | Capacitor_SMD:C_0402_1005Metric | C37, C38, C39, C40, C41, C42, C43, C44 |
| 8 | 33k | Resistor_SMD:R_0402_1005Metric | R42, R43, R48, R49, R54, R55, R60, R61 |
| 8 | unknown | Resistor_SMD:R_0402_1005Metric | R69, R70, R71, R72, R93, R94, R95, R96 |
| 7 | 1759017 | Capacitor_SMD:C_0402_1005Metric | C1, C2, C48, C51, C52, C53, C56 |
| 7 | SWITCH_W_LED_PB6149L-X-102YELLOW | TINRS - Wobbler (pico)sch:PB6149L | U$3, U$4, U$5, U$6, U$7, U$8, U$9 |
| 5 | 197427 | TiNRS_Eagle_Footprints:CASE-A_3216 | C3, C8, C50, C55, C58 |
| 4 | 12.1k | Resistor_SMD:R_0603_1608Metric | R66, R68, R100, R101 |
| 4 | 2k | Resistor_SMD:R_0402_1005Metric | R76, R77, R118, R119 |
| 4 | 47p | Capacitor_SMD:C_0402_1005Metric | C67, C68, C69, C70 |
| 4 | 74HC595 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U6, U7, U11, U13 |
| 3 | 0.1uH C76737 | Inductor_SMD:L_0805_2012Metric | L5, L6, L8 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C9, C12, C15 |
| 3 | 220R | Resistor_SMD:R_0603_1608Metric | R120, R121, R122 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C7, C54, C61 |
| 3 | 4052 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U3, U5, U8 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R73, R74 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R97, R98 |
| 2 | 100p | Capacitor_SMD:C_0402_1005Metric | C65, C66 |
| 2 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C11, C14 |
| 2 | 37.5k | Resistor_SMD:R_0603_1608Metric | R109, R111 |
| 2 | 4.02k | Resistor_SMD:R_0603_1608Metric | R108, R113 |
| 2 | 4.42k | Resistor_SMD:R_0603_1608Metric | R107, R112 |
| 2 | 470p | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | D-SMA | TiNRS_Eagle_Footprints:DO-214AC | D21, D22 |
| 2 | MCP6004 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U9, U10 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C71 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R78 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C49 |
| 1 | 1301804 | Capacitor_SMD:C_0402_1005Metric | C57 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R75 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C60 |
| 1 | 4.7n 100v | TiNRS_Eagle_Footprints:C3216 | C59 |
| 1 | 4.7uH | TiNRS_Eagle_Footprints:L0420 | L7 |
| 1 | 9778330 | TINRS - Wobbler (pico)sch:SOT95P237X112-3N | U1 |
| 1 | AT24CS01-STUM | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BL9342 | Package_TO_SOT_SMD:SOT-23-6 | U$2 |
| 1 | D-SOD-123 | TiNRS_Eagle_Footprints:SOD123 | D3 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U12 |
| 1 | HCPL-0631 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U14 |
| 1 | HT7550-1 | Package_TO_SOT_SMD:SOT-89-3 | U15 |
| 1 | MCP6022 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U16 |
| 1 | MICRO-USB-5P | TiNRS_Eagle_Footprints:C132563 | J14 |
| 1 | NE5532 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U17 |
| 1 | PCM3060 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | IC1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | TL074 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | unknown | TiNRS_Eagle_Footprints:POWER_16_SHROUDED | J1 |
Questions
How big is the Space PCB?
It measures 119.4 × 110.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Space use?
249 parts, built around the ESP32-S3-WROOM-1-N8, MCP6004-E/P, MCP6022-I/P and NE5532. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Space KiCad files?
From the ThisIsNotRocketScience/Eurorack-Modules repository on GitHub, at the commit this page was made from: the board is Development/Eurorack Set 2021/Space/Space/Space.kicad_pcb and its schematic Development/Eurorack Set 2021/Ducktape_kicad/DAC_&_Trigger_outs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Space design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ThisIsNotRocketScience/Eurorack-Modules
6- 2 layers60.3 × 106.5 mm
TiNRS - Wobbler SMDLeds
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
203 parts87MIT - 2 layers60.3 × 106.5 mm
TINRS - Wobbler (pico)sch
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
181 parts87MIT - 2 layers60.3 × 106.5 mm
TiNRS Wobbler2
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
181 parts87MIT - 2 layers40 × 100 mm
WhiteRabbit
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
146 parts87MIT - 2 layers240 × 50 mm
Gamenight
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
39 parts87MIT
Similar boards
- 2 layers119.4 × 109.2 mm
- 4 layers65 × 67 mm
DRV8874-Devboard
awesomeyooner/PSD-17DB
This is a breakout board mainly for the DRV8874, but includes other ICs that help with integrating FOC. About the name, it is short for "Polar Stepper Drive 17 - Dev Board".
68 parts - 2 layers68.5 × 53.3 mm
- 4 layers53.1 × 98 mm
- 2 layers70.8 × 108 mm
- 2 layers171.5 × 106.7 mm
Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers212.3 × 100 mm
- 2 layers90 × 110 mm
