PCM3060PW

Texas Instruments

-25℃~+85℃ 16kHz~192kHz 2.7V~3.6V、4.5V~5.5V Encoder/decoder Serial TSSOP-28 Audio Interface ICs ROHS

Extended

Category: Audio Interface ICs
Package: TSSOP-28
Pins: 28

Overview

The PCM3060PW is an audio Interface IC made by Texas Instruments in a TSSOP-28 package with 28 pins. -25℃~+85℃ 16kHz~192kHz 2.7V~3.6V、4.5V~5.5V Encoder/decoder Serial TSSOP-28 Audio Interface ICs ROHS.

PCBKit's library has its KiCad symbol (Audio:PCM3060, from KiCad's library) and its footprint (Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, from KiCad's library), ready for a KiCad board. 1,115 are in stock at JLCPCB (part C2651841). 22 open-source boards in 18 repositories on GitHub use it.

Symbol

Audio:PCM3060From KiCad's library

Footprint

Package_SO:TSSOP-28_4.4x9.7mm_P0.65mmFrom KiCad's library

From the datasheet

Supply, least: 4.5 V · VCC, recommended operating min · p. 2
Supply, most: 5.5 V · VCC, recommended operating max · p. 2
Supply, least: 2.7 V · VDD, recommended operating min · p. 2
Supply, most: 3.6 V · VDD, recommended operating max · p. 2
Supply, absolute maximum: 6.5 V · VCC, absolute max · p. 2
Supply, absolute maximum: 4 V · VDD, absolute max · p. 2
Works from: -25 °C · Operating free-air temperature min · p. 2
Works up to: 85 °C · Operating free-air temperature max · p. 2
Junction, hottest: 150 °C · Junction temperature absolute max · p. 2
Takes working: 34 mA · sum of ICC and IDD typical, ADC and DAC at 48 kHz · p. 6
Takes at most: 48 mA · sum of ICC and IDD max, ADC and DAC at 48 kHz · p. 6
Takes asleep: 930 µA · sum of ICC and IDD typical, full power down, clocks halted, AC-coupled · p. 6
Junction to air (PCM3060PW): 105 K/W · Junction-to-ambient thermal resistance typical · p. 6

What it is and has

Converters: 24-bit delta-sigma ADC and DAC · p. 1
Operation: ADC and DAC asynchronous operation · p. 1
ADC channels: Stereo · p. 1
ADC sampling rate: 16–96 kHz · p. 1
ADC antialiasing filter: Included · p. 1
DAC channels: Stereo · p. 1
DAC sampling rate: 16–192 kHz · p. 1
DAC analog low-pass filter: Included · p. 1
DAC oversampling digital filter: 4×/8× · p. 1
Zero flags: Included · p. 1
Hardware control: Hardware control mode · p. 1
Power down: ADC/DAC independently · p. 1
Audio interface mode: ADC/DAC independent master/slave · p. 1
Audio data formats: I2S, left-justified, right-justified · p. 1
Supplies: 5-V analog and 3.3-V digital · p. 1
Package: TSSOP-28 · p. 1
Audio codec: 24-bit, 96/192-kHz asynchronous stereo · p. 1
ADC and DAC: 24-bit delta-sigma · p. 1
ADC/DAC operation: Asynchronous · p. 1
ADC THD+N: –93 dB, typical at 48 kHz · p. 1
ADC SNR: 99 dB, typical at 48 kHz · p. 1
ADC dynamic range: 99 dB, typical at 48 kHz · p. 1

Around it

res 220-kΩ: between MODE and VDD; Pullup selects hardware mode with single-ended outputs. · p. 8
res 220-kΩ: between MODE and DGND; Pulldown selects hardware mode with differential outputs. · p. 8
cap 0.1 µF: between VCC and AGND1; Ceramic supply bypass capacitor; place as close to the pins as possible. · p. 41
cap 10 µF: between VCC and AGND1; Electrolytic supply bypass capacitor; place as close to the pins as possible. · p. 41
cap 4.7 µF: between Analog input left and VINL; Electrolytic AC coupling capacitor; gives a 3-Hz cutoff frequency. · p. 41
cap 0.1 µF: between VCOM and AGND; Ceramic; place as close to VCOM as possible for low reference source impedance. · p. 41
cap 10 µF: between VCOM and AGND; Electrolytic; place as close to VCOM as possible for low reference source impedance. · p. 41
res 9.1 kΩ: between Analog input and VINX; Optional series resistor example for 2 Vrms full-scale input, with about 10% gain error. · p. 41
res 220 kΩ: between MODE and VDD; Pullup for one of the two mid-states; ±5% tolerance. · p. 41

Specifications

152

Parameter	Conditions	As printed	Page
Supply voltage VCC	over operating free-air temperature range	min -0.3 · max 6.5 V	2
Supply voltage VDD	over operating free-air temperature range	min -0.3 · max 4 V	2
Ground voltage differences	AGND1, AGND2, DGND, SGND; ±0.1 V	max 0.1 V	2
Digital input voltage	RST, MS, MC, MD, SCKI1, SCKI2, DIN	min -0.3 · max 6.5 V	2
Digital input voltage	BCK1, BCK2, LRCK1, LRCK2, DOUT; maximum (VDD + 0.3 V) < 4 V	min -0.3 V	2
Digital input voltage	ZEROL, ZEROR, MODE; maximum (VDD + 0.3 V) < 4 V	min -0.3 V	2
Analog input voltage	VINL, VINR, VCOM, VOUTL+, VOUTL–, VOUTR+, VOUTR–; maximum (VCC + 0.3 V) < 6.5 V	min -0.3 V	2
Input current (any pins except supplies)	±10 mA	max 10 mA	2
Ambient temperature under bias TA		min -40 · max 125 °C	2
Storage temperature Tstg		min -55 · max 150 °C	2
Junction temperature TJ		max 150 °C	2
Lead temperature (soldering)	5 s	max 260 °C	2
Package temperature (IR reflow, peak)		max 260 °C	2
Analog supply voltage VCC		min 4.5 · typ 5 · max 5.5 V	2
Digital supply voltage VDD		min 2.7 · typ 3.3 · max 3.6 V	2
Digital input clock frequency	Sampling frequency, LRCK1, LRCK2; maximum 96/192 kHz	min 16 kHz	2
Digital input clock frequency	System clock frequency, SCKI1, SCKI2	min 2.048 · max 36.864 MHz	2
Analog input level		typ 3 Vpp	2
Analog output load resistance	AC-coupled	min 5 kΩ	2
Analog output load resistance	DC-coupled	min 10 kΩ	2
Analog output load capacitance		max 50 pF	2
Digital output load capacitance		max 20 pF	2
Operating free-air temperature		min -25 · typ 25 · max 85 °C	2
Sampling frequency, ADC fS	PCM3060PW	min 16 · typ 48 · max 96 kHz	3
Sampling frequency, DAC fS	PCM3060PW	min 16 · typ 48 · max 192 kHz	3
System clock frequency	PCM3060PW; 128, 192, 256, 384, 512, 768 fS	min 2.048 · max 36.864 MHz	3
Input logic level VIH	PCM3060PW; BCK1, BCK2, LRCK1, LRCK2 in slave mode; maximum VDD	min 2 VDC	3
Input logic level VIL	PCM3060PW; BCK1, BCK2, LRCK1, LRCK2 in slave mode	max 0.8 VDC	3
Input logic level VIH	PCM3060PW; SCKI1, SCKI2, DIN, MS/ADR/IFMD, MC/SCL/FMT, MD/SDA/IFMD, RST	min 2 · max 5.5 VDC	3
Input logic level VIL	PCM3060PW; SCKI1, SCKI2, DIN, MS/ADR/IFMD, MC/SCL/FMT, MD/SDA/IFMD, RST	max 0.8 VDC	3
Input logic current IIH	PCM3060PW; footnote (2) inputs; VIN = VDD; ±10 uA	max 10 uA	3
Input logic current IIL	PCM3060PW; footnote (2) inputs; VIN = 0 V; ±10 uA	max 10 uA	3
Input logic current IIH	PCM3060PW; footnotes (1), (3) inputs; VIN = VDD	typ 65 · max 100 uA	3
Input logic current IIL	PCM3060PW; footnotes (1), (3) inputs; VIN = 0 V; ±10 uA	max 10 uA	3
Output logic level VOH	PCM3060PW; IOUT = –4 mA; BCK1, BCK2, LRCK1, LRCK2 in master mode, DOUT, ZEROL, ZEROR	min 2.8 VDC	3
Output logic level VOL	PCM3060PW; IOUT = 4 mA; footnotes (4), (5) outputs	max 0.5 VDC	3
VCOM output impedance	PCM3060PW	min 7 · typ 12.5 · max 18 kΩ	3
Allowable VCOM output source/sink current	PCM3060PW; ±1 uA	max 1 uA	3
Resolution	PCM3060PW; ADC	min 16 · typ 24 Bits	3
Input impedance	PCM3060PW	typ 10 kΩ	3
Antialiasing filter response	PCM3060PW; –3 dB	typ 300 kHz	3
Gain mismatch, channel-to-channel	PCM3060PW; ADC; Full-scale input, VINL, VINR; ± values	typ 2 · max 8 % of FSR	3
Gain error	PCM3060PW; ADC; Full-scale input, VINL, VINR; ± values	typ 2 · max 8 % of FSR	3
Bipolar zero error	PCM3060PW; ADC; HPF bypass, VINL, VINR; ± values	typ 0.5 · max 2 % of FSR	3
Total harmonic distortion + noise THD+N	PCM3060PW; ADC; VIN = –1 dB, fS = 48 kHz	typ -93 · max -85 dB	4
Total harmonic distortion + noise THD+N	PCM3060PW; ADC; VIN = –1 dB, fS = 96 kHz	typ -93 dB	4
Dynamic range	PCM3060PW; ADC; fS = 48 kHz, A-weighted	min 95 · typ 99 dB	4
Dynamic range	PCM3060PW; ADC; fS = 96 kHz, A-weighted	typ 101 dB	4
Signal-to-noise ratio SNR	PCM3060PW; ADC; fS = 48 kHz, A-weighted	min 95 · typ 99 dB	4
Signal-to-noise ratio SNR	PCM3060PW; ADC; fS = 96 kHz, A-weighted	typ 101 dB	4
Channel separation (between L-ch and R-ch)	PCM3060PW; ADC; fS = 48 kHz	min 92 · typ 96 dB	4
Channel separation (between L-ch and R-ch)	PCM3060PW; ADC; fS = 96 kHz	typ 98 dB	4
Crosstalk from DAC	PCM3060PW; fS1 = 48 kHz, fS2 = 44.1 kHz	min 92 · typ 96 dB	4
Crosstalk from DAC	PCM3060PW; fS1 = 96 kHz, fS2 = 44.1 kHz	typ 98 dB	4
Pass-band ripple	PCM3060PW; ADC; < 0.454 fS; ±0.05 dB	max 0.05 dB	4
Stop-band attenuation	PCM3060PW; ADC; > 0.583 fS	min -65 dB	4
Resolution	PCM3060PW; DAC	min 16 · typ 24 Bits	4
Load impedance	PCM3060PW; AC-coupled	min 5 kΩ	4
Load impedance	PCM3060PW; DC-coupled	min 10 kΩ	4
LPF frequency response	PCM3060PW; f = 20 kHz	typ -0.02 dB	4
LPF frequency response	PCM3060PW; f = 44 kHz	typ -0.07 dB	4
LPF frequency response	PCM3060PW; –3 dB	typ 300 kHz	4
Gain mismatch, channel-to-channel	PCM3060PW; DAC; ± values	typ 1 · max 4 % of FSR	4
Gain error	PCM3060PW; DAC; ± values	typ 2 · max 6 % of FSR	4
Bipolar zero error	PCM3060PW; DAC; Single-ended; ± values	typ 1 · max 2 % of FSR	4
Bipolar zero error	PCM3060PW; DAC; Differential (VOUTX+ – VOUTX–); ±1	typ 1 % of FSR	4
Total harmonic distortion + noise THD+N	PCM3060PW; DAC single-ended; VOUT = 0 dB, fS = 48 kHz	typ -93 · max -85 dB	5
Total harmonic distortion + noise THD+N	PCM3060PW; DAC single-ended; VOUT = 0 dB, fS = 96 kHz	typ -94 dB	5
Total harmonic distortion + noise THD+N	PCM3060PW; DAC single-ended; VOUT = 0 dB, fS = 192 kHz	typ -94 dB	5
Dynamic range	PCM3060PW; DAC single-ended; fS = 48 kHz, EIAJ, A-weighted	min 99 · typ 103 dB	5
Dynamic range	PCM3060PW; DAC single-ended; fS = 96 kHz, EIAJ, A-weighted	typ 103 dB	5
Dynamic range	PCM3060PW; DAC single-ended; fS = 192 kHz, EIAJ, A-weighted	typ 103 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC single-ended; fS = 48 kHz, EIAJ, A-weighted	min 100 · typ 104 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC single-ended; fS = 96 kHz, EIAJ, A-weighted	typ 104 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC single-ended; fS = 192 kHz, EIAJ, A-weighted	typ 104 dB	5
Channel separation	PCM3060PW; DAC single-ended; fS = 48 kHz	min 97 · typ 101 dB	5
Channel separation	PCM3060PW; DAC single-ended; fS = 96 kHz	typ 101 dB	5
Channel separation	PCM3060PW; DAC single-ended; fS = 192 kHz	typ 101 dB	5
Crosstalk from ADC	PCM3060PW; DAC single-ended; fS1 = 48 kHz, fS2 = 44.1 kHz	min 97 · typ 101 dB	5
Crosstalk from ADC	PCM3060PW; DAC single-ended; fS1 = 48 kHz, fS2 = 88.2 kHz	typ 101 dB	5
Crosstalk from ADC	PCM3060PW; DAC single-ended; fS1 = 48 kHz, fS2 = 176.4 kHz	typ 101 dB	5
Total harmonic distortion + noise THD+N	PCM3060PW; DAC differential; VOUT = 0 dB, fS = 48 kHz	typ -94 dB	5
Total harmonic distortion + noise THD+N	PCM3060PW; DAC differential; VOUT = 0 dB, fS = 96 kHz	typ -95 dB	5
Total harmonic distortion + noise THD+N	PCM3060PW; DAC differential; VOUT = 0 dB, fS = 192 kHz	typ -95 dB	5
Dynamic range	PCM3060PW; DAC differential; fS = 48 kHz, EIAJ, A-weighted	typ 104 dB	5
Dynamic range	PCM3060PW; DAC differential; fS = 96 kHz, EIAJ, A-weighted	typ 104 dB	5
Dynamic range	PCM3060PW; DAC differential; fS = 192 kHz, EIAJ, A-weighted	typ 104 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC differential; fS = 48 kHz, EIAJ, A-weighted	typ 105 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC differential; fS = 96 kHz, EIAJ, A-weighted	typ 105 dB	5
Signal-to-noise ratio SNR	PCM3060PW; DAC differential; fS = 192 kHz, EIAJ, A-weighted	typ 105 dB	5
Channel separation	PCM3060PW; DAC differential; fS = 48 kHz	typ 103 dB	5
Channel separation	PCM3060PW; DAC differential; fS = 96 kHz	typ 103 dB	5
Channel separation	PCM3060PW; DAC differential; fS = 192 kHz	typ 103 dB	5
Crosstalk from ADC	PCM3060PW; DAC differential; fS1 = 48 kHz, fS2 = 44.1 kHz	typ 103 dB	5
Crosstalk from ADC	PCM3060PW; DAC differential; fS1 = 48 kHz, fS2 = 88.2 kHz	typ 103 dB	5
Crosstalk from ADC	PCM3060PW; DAC differential; fS1 = 48 kHz, fS2 = 176.4 kHz	typ 103 dB	5
Pass-band ripple	PCM3060PW; DAC sharp rolloff; < 0.454 fS; ±0.04 dB	max 0.04 dB	5
Stop-band attenuation	PCM3060PW; DAC sharp rolloff; > 0.546 fS	min -50 dB	5
Pass-band ripple	PCM3060PW; DAC slow rolloff; < 0.308 fS; ±0.5 dB	max 0.5 dB	6
Stop-band attenuation	PCM3060PW; DAC slow rolloff; > 0.73 fS	min -35 dB	6
De-emphasis error	PCM3060PW; ±0.1 dB	typ 0.1 dB	6
Voltage range VCC	PCM3060PW	min 4.5 · typ 5 · max 5.5 VDC	6
Voltage range VDD	PCM3060PW	min 2.7 · typ 3.3 · max 3.6 VDC	6
Supply current ICC	PCM3060PW; fS = 48 kHz/ADC, fS = 48 kHz/DAC	typ 25 · max 36 mA	6
Supply current ICC	PCM3060PW; fS = 96 kHz/ADC, fS = 96 kHz/DAC	typ 25 mA	6
Supply current ICC	PCM3060PW; fS1 = 48 kHz/ADC, fS2 = 192 kHz/DAC	typ 25 mA	6
Supply current ICC	PCM3060PW; fS = 48 kHz/ADC, power down/DAC	typ 12 mA	6
Supply current ICC	PCM3060PW; Power down/ADC, fS = 48 kHz/DAC	typ 13 mA	6
Supply current ICC	PCM3060PW; Full power down; halt SCKI1, SCKI2, BCK1, BCK2, LRCK1, LRCK2; AC-coupled	typ 780 uA	6
Supply current IDD	PCM3060PW; fS = 48 kHz/ADC, fS = 48 kHz/DAC	typ 9 · max 12 mA	6
Supply current IDD	PCM3060PW; fS = 96 kHz/ADC, fS = 96 kHz/DAC	typ 16 mA	6
Supply current IDD	PCM3060PW; fS1 = 48 kHz/ADC, fS2 = 192 kHz/DAC	typ 13 mA	6
Supply current IDD	PCM3060PW; fS = 48 kHz/ADC, power down/DAC	typ 5 mA	6
Supply current IDD	PCM3060PW; Power down/ADC, fS = 48 kHz/DAC	typ 5 mA	6
Supply current IDD	PCM3060PW; Full power down; halt SCKI1, SCKI2, BCK1, BCK2, LRCK1, LRCK2	typ 150 uA	6
Power dissipation	PCM3060PW; fS = 48 kHz/ADC, fS = 48 kHz/DAC	typ 160 · max 220 mW	6
Power dissipation	PCM3060PW; fS = 96 kHz/ADC, fS = 96 kHz/DAC	typ 180 mW	6
Power dissipation	PCM3060PW; fS1 = 48 kHz/ADC, fS2 = 192 kHz/DAC	typ 170 mW	6
Power dissipation	PCM3060PW; fS = 48 kHz/ADC, power down/DAC	typ 77 mW	6
Power dissipation	PCM3060PW; Power down/ADC, fS = 48 kHz/DAC	typ 82 mW	6
Power dissipation	PCM3060PW; Full power down; clocks halted; AC-coupled	typ 4.4 mW	6
Operation temperature	PCM3060PW	min -25 · max 85 °C	6
Thermal resistance θJA	PCM3060PW	typ 105 °C/W	6
SCL clock frequency f(SCL)	STANDARD MODE	max 100 kHz	28
SCL clock frequency f(SCL)	FAST MODE	max 400 kHz	28
Bus free time between STOP and START conditions t(BUF)	STANDARD MODE	min 4.7 us	28
Bus free time between STOP and START conditions t(BUF)	FAST MODE	min 1.3 us	28
Low period of the SCL clock t(LOW)	STANDARD MODE	min 4.7 us	28
Low period of the SCL clock t(LOW)	FAST MODE	min 1.3 us	28
High period of the SCL clock t(HI)	STANDARD MODE	min 4 us	28
High period of the SCL clock t(HI)	FAST MODE	min 0.6 us	28
Setup time for START/repeated START condition t(S-SU)	STANDARD MODE	min 4.7 us	28
Setup time for START/repeated START condition t(S-SU)	FAST MODE	min 0.6 us	28
Hold time for START/repeated START condition t(S-HD)	STANDARD MODE	min 4 us	28
Hold time for START/repeated START condition t(S-HD)	FAST MODE	min 0.6 us	28
Data setup time t(D-SU)	STANDARD MODE	min 250 ns	28
Data setup time t(D-SU)	FAST MODE	min 100 ns	28
Data hold time t(D-HD)	STANDARD MODE	min 0 · max 3450 ns	28
Data hold time t(D-HD)	FAST MODE	min 0 · max 900 ns	28
Rise time of SCL signal t(SCL-R)	STANDARD MODE	max 1000 ns	28
Rise time of SCL signal t(SCL-R)	FAST MODE; minimum = 20 + 0.1 CB	max 300 ns	28
Fall time of SCL signal t(SCL-F)	STANDARD MODE	max 1000 ns	28
Fall time of SCL signal t(SCL-F)	FAST MODE; minimum = 20 + 0.1 CB	max 300 ns	28
Rise time of SDA signal t(SDA-R)	STANDARD MODE	max 1000 ns	28
Rise time of SDA signal t(SDA-R)	FAST MODE; minimum = 20 + 0.1 CB	max 300 ns	28
Fall time of SDA signal t(SDA-F)	STANDARD MODE	max 1000 ns	28
Fall time of SDA signal t(SDA-F)	FAST MODE; minimum = 20 + 0.1 CB	max 300 ns	28
Setup time for STOP condition t(P-SU)	STANDARD MODE	min 4 us	28
Setup time for STOP condition t(P-SU)	FAST MODE	min 0.6 us	28
Allowable glitch width t(GW)	FAST MODE	max 50 ns	28
Capacitive load for SDA and SCL lines CB	STANDARD MODE	max 400 pF	28
Capacitive load for SDA and SCL lines CB	FAST MODE	max 100 pF	28

Pins, by the datasheet

1 MC/SCL/FMT: Mode control: SPI clock, I2C clock, or hardware-mode format; 5-V tolerant Schmitt-trigger input. · p. 8
2 MD/SDA/DEMP: Mode control: SPI data, I2C data, or hardware-mode de-emphasis; open-drain LOW output in I2C mode. · p. 8
3 DOUT: Audio data digital output for ADC. · p. 8
4 LRCK1: Audio data left/right clock input/output for ADC; typical internal 50-kΩ pulldown. · p. 8
5 BCK1: Audio data bit clock input/output for ADC; typical internal 50-kΩ pulldown. · p. 8
6 SCKI1: System clock input for ADC; 5-V tolerant Schmitt-trigger input. · p. 8
7 VDD: Digital power supply, 3.3-V. · p. 8
8 DGND: Digital ground. · p. 8
9 SCKI2: System clock input for DAC; 5-V tolerant Schmitt-trigger input. · p. 8
10 BCK2: Audio data bit clock input/output for DAC; typical internal 50-kΩ pulldown. · p. 8
11 LRCK2: Audio data left/right clock input/output for DAC; typical internal 50-kΩ pulldown. · p. 8
12 DIN: Audio data digital input for DAC; 5-V tolerant Schmitt-trigger input. · p. 8
13 ZEROR: Zero flag, R-channel. · p. 8
14 ZEROL: Zero flag, L-channel. · p. 8
15 RST: Active-low reset and power-down control; 5-V tolerant Schmitt-trigger input with typical internal 50-kΩ pulldown. · p. 8
16 SGND: Shield analog ground. · p. 8
17 VOUTR–: DAC R-channel negative output in differential mode; leave open in single-ended mode. · p. 8
18 VOUTR+: DAC R-channel positive output in differential mode and R-channel output in single-ended mode. · p. 8
19 VOUTL–: DAC L-channel negative output in differential mode; leave open in single-ended mode. · p. 8
20 VOUTL+: DAC L-channel positive output in differential mode and L-channel output in single-ended mode. · p. 8
21 VCOM: ADC, DAC voltage common decoupling. · p. 8
22 AGND2: DAC analog ground. · p. 8
23 AGND1: ADC analog ground. · p. 8
24 VCC: ADC, DAC analog power supply, 5-V. · p. 8
25 VINL: Analog input to ADC, L-channel. · p. 8
26 VINR: Analog input to ADC, R-channel. · p. 8
27 MS/ADR/IFMD: Mode control: active-low SPI select, I2C address, or hardware-mode interface mode; 5-V tolerant. · p. 8
28 MODE: Connect directly to VDD for SPI, through 220-kΩ to VDD for single-ended hardware mode, through 220-kΩ to DGND for differential hardware mode, or directly to DGND for I2C. · p. 8

Ordering codes, by the datasheet

PCM3060PW: TSSOP, PW, 28 pins · Package quantity 50; operating temperature -25 to 85 °C · p. 43
PCM3060PWR: TSSOP, PW, 28 pins · Package quantity 2000; operating temperature -25 to 85 °C · p. 43

Parameters

Current - Supply: 34mA
Current - Supply(Max): 48mA
Features: On-chip digital gain
Interface: Serial
Junction Temperature(Max): 150℃
Operating Temperature: -25℃~+85℃
Sampling Rate: 16kHz~192kHz
Standby Current: 930uA
Thermal Resistance(Junction to Ambient): 105℃/W
Type: Encoder/decoder
Voltage - Supply: 2.7V~5.5V
Voltage - Supply(Absolute Max): 6.5V

Order codes

PCM3060PWRG4LCSC C2151108
PCM3060PWRLCSC C2651841
PCM3060PWLCSC C524236

Pinout

The pins of the PCM3060PW
Pin	Name	Type
1	MC/SCL/FMT	Input
2	MD/SDA/DEMP	Input/output
3	DOUT	Output
4	LRCK1	Input/output
5	BCK1	Input/output
6	SCKI1	Input
7	V_{DD}	Power in
8	DGND	Power in
9	SCKI2	Input
10	BCK2	Input/output
11	LRCK2	Input/output
12	DIN	Input
13	ZEROR	Output
14	ZEROL	Output
15	RST	Input
16	SGND	Power in
17	V_{OUT}R-	Output
18	V_{OUT}R+	Output
19	V_{OUT}L-	Output
20	V_{OUT}L+	Output
21	V_{COM}	Output
22	AGND2	Power in
23	AGND1	Power in
24	V_{CC}	Power in
25	V_{IN}L	Input
26	V_{IN}R	Input
27	MS/AD/IFMD	Input
28	MODE	Input

Open-source boards using it

All 22

2 layers73 × 99.8 mm
Sodium
kanengomibako/Sodium

85 parts14Unlicense
4 layers100 × 100 mm
Ideal groove box
centrevillage/ideal-groove-box
理想のグルーブボックスは俺たちの手で作る
180 parts10MIT
2 layers100 × 80 mm
DeltaSDR
cernohorsky/DeltaSDR
HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.
180 parts9
4 layers75 × 95 mm
Galvo controller
jeffkub/esp32-galvo

136 parts8MIT
4 layers40 × 68 mm
Kit Brainboard
4ms/mp153-brainboard-pcb
PCB for STM32MP153 brainboard
248 parts
4 layers88 × 60 mm
Combined
activexray/hyperactive_radio
Firmware for experimental ISM-band audio transmission
55 parts
4 layers80 × 38 mm
Intercat
BarceP/CAT_Interface
CAT Interface for HAM Radio, USB-C
99 partsCERN-OHL-S-2.0
2 layers65 × 56.5 mm
RPi Ham
bitbyt3r/RPi-Ham
Board to interface the Raspberry Pi with up to two HAM radios
47 parts

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/ti/PCM3060PW" title="PCM3060PW in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/ti/PCM3060PW.jpg" alt="PCM3060PW" width="1200" height="900">

A picture that opens the part, for a README

[![PCM3060PW](https://pcbkit.io/embed/parts/ti/PCM3060PW.jpg?size=s)](https://pcbkit.io/parts/ti/PCM3060PW)

Questions

Is there a KiCad symbol and footprint for the PCM3060PW?

Yes. The symbol is Audio:PCM3060 and the footprint Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the PCM3060PW?

TSSOP-28, with 28 pins. Its footprint is drawn on this page.

Where is the PCM3060PW datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the PCM3060PW?

JLCPCB lists it as part C2651841, with 1,115 in stock; the sellers' links on this page open their listings.

What can replace the PCM3060PW?

Parts like it in the library: the DIT4096IPW by Texas Instruments, the CS4272-CZZR by Cirrus Logic, the CS8416-CZZR by Cirrus Logic and the DIR9001PW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the PCM3060PW?

22 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

PCM3060PW

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Ordering codes, by the datasheet

Parameters

Order codes

Pinout

Open-source boards using it

Sodium

Ideal groove box

DeltaSDR

Galvo controller

Kit Brainboard

Combined

Intercat

RPi Ham

Show this part on your page

Questions

Is there a KiCad symbol and footprint for the PCM3060PW?

What package is the PCM3060PW?

Where is the PCM3060PW datasheet?

Where can I order the PCM3060PW?

What can replace the PCM3060PW?

Which open-source boards use the PCM3060PW?

Parts like it

DIT4096IPW

CS4272-CZZR

CS8416-CZZR

DIR9001PW

CS4272K-CZZR

TDA7718N

DIR9001IPWQ1

TDA7719