2 layers60.2 × 106.5 mm
TiNRS - DuckTape
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
262 parts87MIT
2 layers240 × 50 mm
This is not Rocket Science presents: Eurorack modular synthesizer modules!
- Size
- 240 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 92
- Pads
- 239
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 31 Oct 2015
- Updated
- 1 May 2023
Overview
Gamenight is an open-source printed circuit board by ThisIsNotRocketScience, from the ThisIsNotRocketScience/Eurorack-Modules repository on GitHub, published under the MIT licence. It is a 2-layer board of 240 × 50 mm with 39 parts on 92 nets.
It is built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and AT24CS01-STUM-T. Its parts include 13 switches, 9 connectors, 8 capacitors, 6 resistors and 3 ICs. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AT24CS01-STUM-T
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
README
README.mdView this project on CADLAB.io.
Eurorack-Modules
This is the central repo for all the "This is not Rocket Science" eurorack modular synth modules.
Please refer to the "Production" folder if you are looking for boards to build. You will find all the design & firmware files for our latest production versions. Artwork is NOT included. Be creative.
All our current development & experiments can be found in the "Development" folder
Sourcecode to the firmware can be found in the Eurorack-KDS repository
Tools needed:
- Eagle 7+
- Kinetis Development Studio (or whatever the latest NXP/freescale IDE is)
- A JTAG probe to flash the initial firmware
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SW_Push | keyswitches:Kailh_socket_PG1350 | SW1, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13 |
| 8 | POTSQUAREHOLE_SMALLKNOB | TiNRS_Eagle_Footprints:ALPS_POT_SQUAREHOLES | P1, P2, P3, P4, P5, P6, P7, P8 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R73, R74 |
| 2 | 1759017 | Capacitor_SMD:C_0402_1005Metric | C48, C52 |
| 2 | 197427 | TiNRS_Eagle_Footprints:CASE-A_3216 | C50, C55 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R76, R77 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C62 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R78 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R75 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C60 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C61 |
| 1 | 4.7n 100v | TiNRS_Eagle_Footprints:C3216 | C59 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AT24CS01-STUM | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1 | U12 |
| 1 | MICRO-USB-5P | TiNRS_Eagle_Footprints:C132563 | J14 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
More from ThisIsNotRocketScience/Eurorack-Modules
6- 4 layers119.4 × 110.4 mm
Space
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
249 parts87MIT - 2 layers60.3 × 106.5 mm
TiNRS - Wobbler SMDLeds
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
203 parts87MIT - 2 layers60.3 × 106.5 mm
sch.kicad_pcb.jpg?size=s&soon)
TINRS - Wobbler (pico)sch
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
181 parts87MIT - 2 layers60.3 × 106.5 mm
TiNRS Wobbler2
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
181 parts87MIT - 2 layers40 × 100 mm
WhiteRabbit
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
146 parts87MIT
Similar boards
- 8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0 - 4 layers93.3 × 60.3 mm
Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 12 layers165 × 102.7 mm
Data center rdimm ddr5-tester
antmicro/rdimm-ddr5-tester
FPGA-based DRAM tester supporting RDIMM DDR5 memories
797 parts44Apache-2.0 - 6 layers69.6 × 30 mm
Lpddr4-testbed
antmicro/lpddr4-testbed
Experimental breakout board for a signle 200-ball WFBGA LPDDR4 chip in SO-DIMM DDR4 form factor.
68 parts27Apache-2.0 - 2 layers48 × 49 mm
JBC Nano Hardware
Winkelkatze/jbc_nano_solder
DIY station for JBC nano (NT115) soldering irons
53 parts25MIT - 8 layers78 × 55 mm
Jetson AI Cam CopperPilot
CopperPilot/Jetson-AI-Cam-CopperPilot
A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.
305 parts15 - 6 layers69.6 × 40 mm
Lpddr5-testbed
antmicro/lpddr5-testbed
Experimental adapter intefacing a single LPDDR5 IC with FPGA-driven memory testers
163 parts14Apache-2.0 - 2 layers174 × 111 mm
Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0
Questions
How big is the Gamenight PCB?
It measures 240 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gamenight use?
39 parts, built around the ESP32-S3-WROOM-1-N8, AMS1117-3.3 and AT24CS01-STUM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gamenight KiCad files?
From the ThisIsNotRocketScience/Eurorack-Modules repository on GitHub, at the commit this page was made from: the board is Development/Eurorack Set 2021/GameNight/Gamenight/Gamenight.kicad_pcb and its schematic Development/Eurorack Set 2021/Ducktape_kicad/DAC_&_Trigger_outs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gamenight design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).