Skip to the content
12345

AT24CS01-STUM-T

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHS

Part id
microchip/AT24CS01-STUM-T
Category
EEPROM
Package
SOT-23-5
Pins
5
In stock
74 at JLCPCB (C616257)
Used on
24 open-source boards

Overview

The AT24CS01-STUM-T is an EEPROM made by Microchip Technology in a SOT-23-5 package with 5 pins. -40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 1Kbit 1MHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOT-23-5 EEPROM ROHS.

PCBKit's library has its KiCad symbol (Memory_EEPROM:AT24CS01-STUM, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 74 are in stock at JLCPCB (part C616257). 24 open-source boards in 17 repositories on GitHub use it.

Symbol

SCL1GND2SDA3VCC4WP5
Memory_EEPROM:AT24CS01-STUMFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the AT24CS01-STUM-T
PinNameType
1SCLInput
2GNDPower in
3SDAInput/output
4VCCPower in
5WPInput

Open-source boards using it

24See all 24
  • 8 layers100.2 × 55 mmJetson nano baseboard, the printed circuit board in 3D

    Jetson nano baseboard

    antmicro/jetson-nano-baseboard

    Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX

    391 parts548Apache-2.0
  • 4 layers93.3 × 60.3 mmArduino 386EX V5, the printed circuit board in 3D

    Arduino 386EX V5

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    56 parts114
  • 12 layers165 × 102.7 mmData center rdimm ddr5-tester, the printed circuit board in 3D

    Data center rdimm ddr5-tester

    antmicro/rdimm-ddr5-tester

    FPGA-based DRAM tester supporting RDIMM DDR5 memories

    797 parts44Apache-2.0
  • 6 layers69.6 × 30 mmLpddr4-testbed, the printed circuit board in 3D

    Lpddr4-testbed

    antmicro/lpddr4-testbed

    Experimental breakout board for a signle 200-ball WFBGA LPDDR4 chip in SO-DIMM DDR4 form factor.

    68 parts27Apache-2.0
  • 2 layers48 × 49 mmJBC Nano Hardware, the printed circuit board in 3D

    JBC Nano Hardware

    Winkelkatze/jbc_nano_solder

    DIY station for JBC nano (NT115) soldering irons

    53 parts25MIT
  • 8 layers78 × 55 mmJetson AI Cam CopperPilot, the printed circuit board in 3D

    Jetson AI Cam CopperPilot

    CopperPilot/Jetson-AI-Cam-CopperPilot

    A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.

    305 parts15
  • 6 layers69.6 × 40 mmLpddr5-testbed, the printed circuit board in 3D

    Lpddr5-testbed

    antmicro/lpddr5-testbed

    Experimental adapter intefacing a single LPDDR5 IC with FPGA-driven memory testers

    163 parts14Apache-2.0
  • 2 layers174 × 111 mmPedalboard hw, the printed circuit board in 3D

    Pedalboard hw

    pedalboard/pedalboard-hw

    pedalboard audio midi processor open hardware

    169 parts14CERN-OHL-P-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AT24CS01-STUM-T?

Yes. The symbol is Memory_EEPROM:AT24CS01-STUM and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AT24CS01-STUM-T?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the AT24CS01-STUM-T datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the AT24CS01-STUM-T?

JLCPCB lists it as part C616257, with 74 in stock; the sellers' links on this page open their listings.

What can replace the AT24CS01-STUM-T?

Parts like it in the library: the 24C02S(XBLW) by XBLW, the AT24C02CM5/TR by HGSEMI, the FT24C16A-KLR-T by FMD and the FT24C02A-KLR-T by FMD. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AT24CS01-STUM-T?

24 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.